do u mind explaining why the clarity problem is there? my cousin who runs a car accessories biz told me the film isn't designed for front windscreen because of the clarity... is it true?

Hi guys. Anyone heard about a brand called Signature? A shop I normally visited says he's no more selling other brand but only this Signature film with sputtering. RM2k+ for toyota vios sounds too much for me.

Hi,

Just a sharing on what I have tinted on my SUV recently as below:
Location Tint --> Penang, Raytech Tint Georgetown
Tint Spec:
- front windscreen: RC series (solar film)
- front door glass: MX series (security film)
- rear door glass: MC series (solar film)
- rear windscreen: RC series (solar film) [free upgraded from MX series as no more stock for MX series]
- sunroof: Standard sunroof tint (not sure what brand)
Total price --> RM 2200
Warranty --> 7 year with nation wide store, include bubbling, discolor or drastic heat reduction <30%. (main reason choosing Raytech)

Infrared/Phone signal/GPS --> Was inform that will impact on smart tag, hence requested the technician to cut a small part on front windscreen for the smart tag (using lokatag). Still able to scan my card to enter my condo without issues. Phone signal and GPS are still working and did not notice any degradation, will need to monitor.

Experiences --> Total time taken almost 2 hours+, waiting in the customer lounge with light snack and milo. Overall experiences was good. There are abit small bubble on the windscreen causes slight blur right after the tint installed, was thinking it might take some time for it to go away, will check again after a few days. (please do let me know if that is not true)

Is there any budget device/way that we can measure the tint performance? (i.e. UVR/IRR/etc)
Just wanted to check if tint installed are what is being mention, as of now there is no way to confirm what is being installed other than trusting what I am being told.

Thank you

just go to any tint shop and borrow them the 3M device things, can check the IRR, VLT Percentage etc

As I was survey for tint, there is a shop recommend the following tint.
Cannot comment on the performance as I did not selected it, but I was quote with RM2k (including sunroof) for a SUV.
Spec of the tint I believe its their top tier, if not mistaken it was V40 which reflecting not absorbing heat.

Thanks for the inputs, I have device as per attached which can measure, but are just oni for tint which is not installed yet.
The device you mention is it the similar or others device that can measure tints which are installed on the windows?




Attached image(s)

shopee solar power meter, average rm280+

If the bubbles on the windscreen is due to the water/solution that the installer spray prior to the installation, my previous installer suggested that I park the car at open carpark under the hot sun for at least a few days for the bubbles to go away.
For my case, the bubbles and haze disappeared after a week or so after parking the car at open carpark

Got it.. currently my car was parked indoor.. will take a for a stroll under the hot sun for a few round to see if that helps.
Thanks

Hi, want to ask did anyone here experienced Ceramic Pro their Magnus Pro Nano Ceramic and Titanium film before? How was it compared to 3M Crystalline 97?

Vkool shop in penang Island or BM/Juru area needed

The vkool chai leng park can get special price but not as much discount as KL

I wanna ask u after almost a year of usage, is this xpel good?

I am still deciding between xpel and vkool for my upcoming mazda 3 sedan, vkool is trusted but xpel by G Guard is mazda panel, I can one shot let them do all

dropped you a PM. G Guard service is very good, and they don't simply up sell you. It is base on your requirement and usage pattern.

If you want to see the workmanship of XR plus on real car, tell the boss, he will call me. I can drop by, since it is 15min drive away from my home.

Post Removed. .thank you.

This post has been edited by KENGYAP: Aug 26 2021, 09:30 AM

Vkool great but drawback were smart tag will not function (can use rfid) and apartment card/remote gate issue. No doubt it one of the best tinted available on market for heat rejection. I believe the metallic based tint is the best vs ceramic on heat rejection

looking for recommendation for FWS tint that works for auto gate/apartment boom card. New apt entrance & carpark gate both use RFID instead of physical tap card 💆🏻‍♂️. anyone know what brand go to solve this issue 🤦

take tint with IRR 90% and below, 80% max suggestion to prevent the IR reject the signals

Hi can recommend me the best tint for heat rejection for myvi?

I used Ecotint, Raytech, 3M for my previous cars.
I'd like to try Hamel this time