me oso afraid to put high volt to my precious ram

the highest i think at 2.275

@ ahpaul82...

is the max of ur ram..
or the board limit ur ram??

Any volt higher than 2.2 usually need proper cooling maybe heatspreader or better blow some air directly to ur ram.

i dun think its because of my micron..
take a look at my screenshot below



The timing is applied to both my crucial and corsair ram

Details
AMD AM2 X2 3800 Windsor 2.0GHz @ 2.5GHz 1.475V
Crucial DDR667 512MBx2 + Corsair XMS2 DDR800 512MBx2 @ DDR833 4-4-3-8 2.1V

little update
able to run with higher clock using lower Vdimm with ram TRFC=30
Kvr D9gkx running 426x9 3-3-3-9 with 2.325vdimm on dfi infinity dark

This post has been edited by rlhc17: May 31 2007, 05:33 AM


Attached thumbnail(s)

HI, extremely noob here want to ask is it RAM will affect my Graphic Card performance?
I'm using a normal 1GB DDR2 RAM. Must i used normal 2x512MB DDR2 RAM or a high performance one such as XMS Twin2x type?

Please kindly assist here...

Thank you...

Its processor that will most likely bottleneck a gfx card performance.

what's the best way to burn-in rams?

DOS based memtest, or Orthos/Prime95.

for Orthos/Prime, what should i choose? Large or Custom? If Custom, what should i set for min and max FFT?

Thanks in advance.

Large would be fine.

Put your rams on the stove, light it up, there, you'll get yourself a burnt ram.

then what? get a pair of shiny Ballistix?

Okay,....But I still need someone to assist me with my questions....can anyone give me some feedback?

Thank you

Nope, you'll get Team Xtreem PC2 10400 DDR2 1300MHz 2GB Kit with Micron D9GKX chipsets. ROFLMAO

Try it on your Team Valueram.
Remember to burn it at 250Degrees, for 15minutes.

Ngiahahaha

This post has been edited by sHawTY: May 31 2007, 05:19 PM

lol, really thumbs up to this reply. i was reading this thread with so much concentration, and when i reached this reply, i really burst out laughing. lol.

btw, a noob question here. my mobo is as shows in my sig, so i was thinking, is it better to get 2x1GB ddr2 800MHz rams, or get 4x512mb ddr2 800MHz ram? will it be the same, or there'll be performance difference?

better get 2*1GB kit. better upgrade option in future. if want to OC, get a pair of cheapest D9GMH ddr667 ram. btw, shawty currently got some special promo for 2*1GB BALListix 800 kit, rm510 only.

Overclocking 2 sticks of ram is always easier than overclocking four sticks.

Wao ... reli nid to do like ur avatar ?

burn ....

Nah, that thing burning is a panda, not ddr2 ram

yeah, thanx for the information shawty, i heard somewhere that having all 4 slots filled up can get good results, even though im not in favour of that idea though.

you think you'll still be selling those rams on end of Q3 shawty? will the ram that im thinking of getting get cheaper some more by that time? now i don't have money already, but i'll get it like in another 3 more months to go. need to save up..

and do i need to increase Vdimm to +0.4 so that i can get the timings specified with the product?

This post has been edited by rockmaniac85: Jun 2 2007, 03:49 PM