I think that is team group relabeled chip instead of micro chip...

Whose that?

just ask the seller show u the pic before u buy from him lor...

Any seller that you found saying that Team Valueram DDR2 PC2-5300 667MHz 1GB uses Micron chipsets is a big liar.
Show us who's that guy and more preferable with link.

Zhen^Wei selling. He said Micron D9DCN on it. Anyone can confirm the OC performance of this chips?

This post has been edited by Snyy: Oct 26 2007, 05:00 PM

Liar.
Me and soulfly already told him not to confuse people about the ram that he's selling uses Micron D9DCN.

Snyy, the earlier batch overclocks well, as in the earlier batch Team Valueram DDR2 PC2-5300 667MHz uses ProMOS chipset.
But the latest batch no longer uses ProMOS chipset.
I bought two stick for my own use directly from my supplier, tested, and it doesn't overclock well enough.

Dude, if you really want to overclock your ram, perhaps you should dig deeper in your pocket and get the rams that is built for overclocking.

Example:
Team Xtreem Dark or Team Xtreem [Any speed]
Crucial 10th Annivessary DDR2 PC2-5300 667MHz 1GB
Crucial Ballistix or Crucial Ballistix Tracer [Any speed]

And some other specific model from some other brand.

This post has been edited by sHawTY: Oct 26 2007, 05:08 PM

Bro, how good is Promos chip ~?

ProMOS has the capability to reach high speed of 1000MHz at a very very high timings which is bad.

While Micron D9GCT/D9GMH/D9GKX, it has the capability of reaching high speed but on very low timings which is why they were voted as the best 3 chipset for DDR2.

And also, tell zhen^whei about this, who told him that Micron D9DCN has the capability of reaching 1000MHz?
Micron D9DCN is a really really bad overclocker.
No overclocker uses Micron D9DCN for their system.

big clap to this bro, anyway bro, other than D9 wut types of chipset that u try urself and got above 1000mhz??

im using kingston value ram 1GBX2 DDR2 800Mhz oc to 860Mhz
currently i set the timing to 4,4,4,12 with 2V, so far running prime 95 for 1 hour no problem
any of you guys experienced this ram before??
just wanna know how far can the ram go


This post has been edited by v1rtual: Oct 27 2007, 03:42 AM

It depends on how much vdimm you dare to put lor
I think 500 w CAS5 should not be a problem.
Depend on your luck

And bro, your rams are not running in dual mode. Suspect plug in wrong ram slot for dual ram combination.

-pWs-

what do u mean by 500w CAS5??, sorry im noob
whats the max voltage it can go?? i scared if put above 2v can get burned running 24/7 cause it is supposed to run at 1.8v rite??

btw, how to make it running at dual mode??
i put the ram on slot 1 and 2, how is supposed to be??
thx

This post has been edited by v1rtual: Oct 27 2007, 09:52 AM

what do u mean by 500w CAS5??, sorry im noob
Means 500Mhz with 5-5-5-?(15 or 18).....

whats the max voltage it can go?? i scared if put above 2v can get burned running 24/7 cause it is supposed to run at 1.8v rite??
Depends on your ram.... Mine running 2.1v and been running 24/7 still haven't burn yet...

btw, how to make it running at dual mode??
i put the ram on slot 1 and 2, how is supposed to be??
Slot 1 and 3 dude.... 1and 2 won't work on dual mode....

peace......

to run dual mode depend on the mobo.
Check manual.
some do dual channle on 1&2 like DFI
others like explain by xyoshix

500Mhz?? but mine is 800Mhz with 5-5-5-15
then i oc to 860Mhz 4-4-4-12 @ 2v
sorry if i got it wrong



but yours is corsair rite??
mine is kingston value ram only
so the only choice to know how far can the ram go is by keep testing it guys??

This post has been edited by v1rtual: Oct 27 2007, 03:28 PM

He's using Corsair XMS2, and yours is Kingston Valuerams.
What's there to cry about?

Both of them is the same.
Corsair XMS2 Twinx is nothing but a Corsair Valueram with heatspreader.

Honestly, there's nothing to cry about.

This post has been edited by sHawTY: Oct 27 2007, 04:30 PM

but the price for XMS2 much higher than value ram

ohh, really??
but why is the price different is so much, is it just because of the brand??

Higher prices doesn't mean it's better than the others.

That's because Corsair love to suck people's blood.

Do you see any extreme overclocker uses Corsair rams for their system?

This post has been edited by sHawTY: Oct 27 2007, 05:41 PM

i see, most overclockers use crucial nowadays which bro sHawTY selling at a good price
too bad, i dont have the extra money to get a better performance ram

btw, now after a few hours running my system with 4-4-4-12 @ 2v the prime95 shows that there is hardware failure
what should i do now?? would it help if i increase the voltage to 2.1v??

This post has been edited by v1rtual: Oct 27 2007, 06:40 PM