no 1:1 , 1:1 only available on intel platfom
AMD is CPU/RAM

667 devider
667/2 = 333.33
example 2000/333.33= 6
(6) ram mutiple
2000/6 = 333.33 , so ur ram run full speed

let said ur proc is 2600mhz
2600/333.33 = 7.8
(8) ram mutiple
2600/7 = 325 , ur ram running at 325MHz , but doesn't affect alot performance , human eye can see the effect ..

This post has been edited by likito: Oct 22 2007, 04:19 PM

If ur ram is 800+Mhz DDR2 while ur FSB is only 333 how?... cuz im setting 533Mhz to get 1:1 FSB:DRAM ratio..

u r intel platfom ! diff story ! intel is follow the FSB , i not really familiar the intel platfom
if ur FSB is 333 , i think is 6:5 to get 400mhz (800mhz)

This post has been edited by likito: Oct 22 2007, 06:19 PM

Yes...AMD HTT and ram speed is different from Intel.
Please refer to the AM2 overclocking thread.
There is a table to clear your confusion

-pWs-

thanks for the explanation, appreciate very much..

i am going to buy 6000+

so..

3000mhz/333.33 = 9.00009 (9) ram multiple? and the ram run at 333mhz

if i get DDR2 800 then it will be 3000mhz/400 = 7.5 (8) ram multiple? and the ram run at 375mhz?

and if i buy DDR2 533 then 3000mhz/266.66 = 11.25 (12) ram multiple and the ram speed would be 250mhz?

using KingstonVR DDR2 667MHz 1GB x 2

My timing 5-5-5-31 . How to make its better ?

This post has been edited by Liuteva: Oct 23 2007, 09:28 AM

So is there any effects if your RAM clock is higher than ur fsb on intel board?

try to tight more.. but depend how much vdimm u want to feed

[attachmentid=316753]

Mayday mayday,

Calling all expert~!

May I know what chipset is in my RAM~??

it is Promos chipset mate.

Geil Estoria ddr2-800........

what do you all think???

Thank U, my brother ~!

Any comment on how it will perform ?

Can fight with hynix or micron ~??

As far as I know, in general, Micron D9 is better than promos for overclocking.... Dunno about hynix....

This post has been edited by kmarc: Oct 25 2007, 12:32 AM

5-5-5-31 is the wrong timing for it, the SPD itself is 5-5-5-15 at least. You can usually get at least 4-4-4-12.

i think the last timing 31, quite imposibble.. try to change the subtiming

yes , u will get 8 ram multiple , and run at 375mhz , dont worry , doesn't affect alot !

hi guys, currently what micron chips are on 1GB Team Group DDR667 Value RAM? and how this ram perform compare to kingston hynix ??

No team valueram uses Micron chips nowadays.
It have been replaced with other chipsets.

From my test of a new unit 1GB Team Valueram which is from the newest batch, and what i can say is that it's not really overclockable.

If you're lucky, you might get those old batches that uses ProMOS chipset which is considered as overclockable, but still can't fight with any Micron D9GMH / D9GKX / D9GCT chips.

Then what chips are on Team value ram newest batch? because there is someone selling team value ram and claim that there is micron chips on it.

he show the pic??

got link??