doesnt it come with instructions?
mebe its not the pin...
if not push, then try pull... ?

my guess...
lift up the pin... it is spring operated?
then pull out the pedal and push it upward... .. main tembak...

cos by looking at the construction, no way u can push it , so it should be pulled/flipped
aft releasing a lock which is the pin

anyone know how much johnny charge for tuning gear ? thinking to send my bike over to tune... or any better recommendation ?

Service and tuning at Jonny cost about Rm30

The Dahon Jiffold looks cool but the new Dash is even better

I have some doubts about your fork wobbling. As I see from the pix of your bike, it uses a quill stem. This is an old design found in our old bikes where the stem has two metal wedges that tightens and grips onto the fork's steerer tube. Parts for these are easily found in any old timer shops but I doubt Johnny's stocks them. Try taking your bike to any Ah Pek's bike shop and I am sure they can repair and tighten it. Another point is, yours has a drop bar and I think it works better to have a non-suspension fork and I think any kiddy's 20 inch fork can be fitted if the need to change the fork arises. Take it to an old timer's shop and see if they can tighten it.

There are also a conversion quill stem that when used, you can get the regular stem (where you choose the angle and length ) and lock onto the adapter.

i agree with etig,
bring ur bike to a few ahpek bike shop to determine what is the cause.

there is one near ur place.
when u exit from ktm komuter station, turn right, cycle past the balai polis,
the bike shop is opposite the pos office... 

this one of the  " real deal " ahpek bike shop in pudu..
from " village bicycle " facebook.
with welding skills

https://www.facebook.com/media/set/?set=a.4...57110159&type=1

another one in jalan pandan

https://www.facebook.com/photo.php?fbid=501...&type=1&theater

The dash x20 was sold here in msia back in 2010.
All the models above r for jdm...

I ordered a frame for all my old Dahon parts a few months ago and now the frame arrived!    But now I don't know whether to keep of to sell it off. Most of the parts are not compatible    Seat post and clamp sizes are different, handlepsot settings different. Anyway have to assemble it anyway. Anyone interested in taking this off me?

Thinking of letting go. I can assemble it as 7 speed, 8 speed or 24 speed. I have all the necessary co
mponents. Busy, busy assembling now!

Order frm where n how much?

From an agent of TaoBao. RM450 for the frame, RM150 for the handle post. I think you also know who the agent is. 

Great 
Y din u choose a dahon copy? Then all parts will fit..
U ship air?
Bought other stuff?

Great 
Y din u choose a dahon copy? Then all parts will fit..
U ship air?
Bought other stuff?

If ship wit fork n post attached the dimension will increase a lot...

Finally found the adapter for Dahon Boardwalk or Tern bikes. Now I can fit the Shimano rear derailleurs onto the Boardwalk. The propriety Neos are lousy, cage is too short! Also it looks flimsy!

The original!


The Neos mounting tread, without hanger for other brands of RD! 


Fitting the adapter on.


Completed switch! It was used to be a Tiagra RD but seems the cage is also too short so changed to Sora which is taken out from a road bike which is unused since the day it was bought. 

hi guys, anyone know what is the price range for the airnimal/dahon jetstream folding bike? and does any shop still selling it? or do guy have any other suggestion for full suspension folding bike?

hi guys, anyone know what is the price range for the airnimal/dahon jetstream folding bike? and does any shop still selling it? or do guy have any other suggestion for full suspension folding bike?