Outline ·
[ Standard ] ·
Linear+
LYN Proton Saga/Iswara Driver's Thread! V27, all the older sifus went MIA liao :(
|
TSQuazacolt
|
Aug 10 2013, 02:52 AM
|
|
QUOTE(kaliku @ Aug 10 2013, 12:08 AM) Hey guys, my 2nd hand 2001 iswara can only run on ron97. Tried pumping ron95 into it and it really felt bad straight after. Any way I can get the engine to run on ron95? yes, just retard the distributor timing a bit
|
|
|
|
|
|
kaliku
|
Aug 10 2013, 06:52 PM
|
|
QUOTE(Quazacolt @ Aug 10 2013, 02:52 AM) yes, just retard the distributor timing a bit  Would that be possibly done by any mechanic or do I need to go to a workshop with special equipment that requires that/tuning?
|
|
|
|
|
|
poolcarpet
|
Aug 10 2013, 07:09 PM
|
|
you need a timing light.. better not to meddle with it, but if you really want to, make sure you mark the current position of the distributor, then loosen the screws and turn it SLIGHTLY to adjust. forgot which direction is retard, so have to trial and error.... using timing light is best. something like this method: http://youtu.be/sGzxCCaxDjI?t=4m40sQUOTE(kaliku @ Aug 10 2013, 06:52 PM) Would that be possibly done by any mechanic or do I need to go to a workshop with special equipment that requires that/tuning? This post has been edited by poolcarpet: Aug 10 2013, 07:12 PM
|
|
|
|
|
|
sinister_sid
|
Aug 11 2013, 02:19 AM
|
New Member
|
fuhhhhh new thread QUOTE(Notoriez @ Aug 7 2013, 04:52 PM) Go to any workshop that has Dyno machine  Else go find Unker Fred / Sid Tan @ 4G1series Group in Facebook put me on table for wat?
|
|
|
|
|
|
ILikePie
|
Aug 11 2013, 06:30 PM
|
New Member
|
QUOTE(kaliku @ Aug 10 2013, 06:52 PM) Would that be possibly done by any mechanic or do I need to go to a workshop with special equipment that requires that/tuning? DIY can also, stand infront the car, loosen the 2 bolts holding the distributor, then move inwards to retard, outwards to advance ignition timing. Do it bit by bit. Remember to tighten back once adjusted. Do some marking before u pusing or if u dowan mark oso can QUOTE(sinister_sid @ Aug 11 2013, 02:19 AM) put me on table for wat?  u our trusted undertree pomen maaaa
|
|
|
|
|
|
megadisc
|
Aug 11 2013, 11:01 PM
|
|
QUOTE(kaliku @ Aug 10 2013, 12:08 AM) Hey guys, my 2nd hand 2001 iswara can only run on ron97. Tried pumping ron95 into it and it really felt bad straight after. Any way I can get the engine to run on ron95? geez i nvr mod my car leh ... all the while running the ron95
|
|
|
|
|
|
flex3x
|
Aug 12 2013, 06:41 PM
|
New Member
|
QUOTE(kaliku @ Aug 10 2013, 12:08 AM) Hey guys, my 2nd hand 2001 iswara can only run on ron97. Tried pumping ron95 into it and it really felt bad straight after. Any way I can get the engine to run on ron95? whoa..your car is Picky eaters..hehe.. Re-condition the engine
|
|
|
|
|
|
TSQuazacolt
|
Aug 12 2013, 07:17 PM
|
|
QUOTE(flex3x @ Aug 12 2013, 06:41 PM) Re-condition the engine  no need
|
|
|
|
|
|
megadisc
|
Aug 12 2013, 09:32 PM
|
|
QUOTE(Quazacolt @ Aug 12 2013, 07:17 PM) that's good ...
|
|
|
|
|
|
megadisc
|
Aug 12 2013, 09:33 PM
|
|
QUOTE(poolcarpet @ Aug 10 2013, 07:09 PM) you need a timing light.. better not to meddle with it, but if you really want to, make sure you mark the current position of the distributor, then loosen the screws and turn it SLIGHTLY to adjust. forgot which direction is retard, so have to trial and error.... using timing light is best. something like this method: http://youtu.be/sGzxCCaxDjI?t=4m40snext week need to get my springs replaced wonder what's the budget gonna be like ... prefer comfort than stiff...
|
|
|
|
|
|
TSQuazacolt
|
Aug 12 2013, 09:45 PM
|
|
QUOTE(megadisc @ Aug 12 2013, 09:33 PM) next week need to get my springs replaced prefer comfort than stiff... if going comfort, stick to stock springs. i think can find people 'upgrading'/lowering their car and get a cheap price of maybe 50-150 +/- lol
|
|
|
|
|
|
megadisc
|
Aug 12 2013, 09:50 PM
|
|
QUOTE(Quazacolt @ Aug 12 2013, 09:45 PM) if going comfort, stick to stock springs. i think can find people 'upgrading'/lowering their car and get a cheap price of maybe 50-150 +/- lol per piece or per set ???? sorry new bie ...i just felt my butt aching going over the bumps and holes...
|
|
|
|
|
|
TSQuazacolt
|
Aug 12 2013, 09:51 PM
|
|
QUOTE(megadisc @ Aug 12 2013, 09:50 PM) per piece or per set ???? sorry new bie ...i just felt my butt aching going over the bumps and holes... whole set of 4... because no one wants them rofl. btw consider getting better/comfort tires too as they play an important role as well (as well as KYB oil if your absorbers are worn to reduce chassis movement during terrain irregularities)
|
|
|
|
|
|
megadisc
|
Aug 12 2013, 10:25 PM
|
|
QUOTE(Quazacolt @ Aug 12 2013, 09:51 PM) whole set of 4... because no one wants them rofl. btw consider getting better/comfort tires too as they play an important role as well (as well as KYB oil if your absorbers are worn to reduce chassis movement during terrain irregularities) oic ....good to know the springs like that ... as for the abosrobers , i did get them replaced but never new if there was aa differnentce ...
|
|
|
|
|
|
cloudstrife07
|
Aug 14 2013, 04:09 AM
|
|
guys, wanna ask, why is this saga aircond controller different from normal? see the 4th pic : http://www.mudah.my/Proton+Saga+iswara+LMS...al-22616785.htmby 'normal' i mean like this one in the 3rd pic: http://www.mudah.my/Proton+Saga+Iswara+LMS...ng-22430078.htmthe 'normal' one always spoil la, i'm thinking to change to the one in the 1st link if available. anyone knows how much the price? This post has been edited by cloudstrife07: Aug 14 2013, 04:11 AM
|
|
|
|
|
|
Rash_
|
Aug 14 2013, 05:15 AM
|
New Member
|
|
|
|
|
|
|
TSQuazacolt
|
Aug 14 2013, 07:54 AM
|
|
QUOTE(cloudstrife07 @ Aug 14 2013, 04:09 AM) no idea on the newer LMSS/LMST, mine 14 years old still the same controllers rofl.
|
|
|
|
|
|
TSQuazacolt
|
Aug 14 2013, 07:55 AM
|
|
QUOTE(Rash_ @ Aug 14 2013, 05:15 AM) done added, welcome
|
|
|
|
|
|
cloudstrife07
|
Aug 14 2013, 11:17 AM
|
|
QUOTE(Quazacolt @ Aug 14 2013, 07:54 AM) no idea on the newer LMSS/LMST, mine 14 years old still the same controllers rofl. your Super Saga no need la. too powderful already. aircond also must be very cold like Antartica  anyway, dad asked me to convert the LMST to auto, since kaki sakit already. aih. waja also need service, this one oso need convert.
|
|
|
|
|
|
rozz_1291
|
Aug 14 2013, 12:06 PM
|
|
Wahhhh... V27 thread edi. Kudos to Quazacolt for taking care SIE
|
|
|
|
|