Actually, i dont really care also as the hissing sound doesnt really occur, im only worried if it the hissing sound will cause the charger to burn or will damage my phone

I have the same concern but mine don't have hissing sound yet. The heat from the charger is quite hot. Worry that it may burn or explode.

ok. im ready to flash monx rom and perseus kernel.
this is what im going to do:

1. backup(both TBpro and Nandroid) - done
2. Copy both monx and perseus zip file to sdcard. - done
3. boot to recovery.
4. wipe data/factory and dalvik cache.
5. flash the monx zip file from sd card
6. after flash then reboot.
7. enter recovery again and repeat step 4.
8. flash perseus zip file from sd card.
9. reboot.

tell me guys if the steps are ok or u got any other suggestions?

there was someone reported his charger exploded, also many reported the hissing sound, some choose to live with that, some choose to get it replaced, mine has hissing sound when reach 90% and above, i choose to buy ipad adapter and an extra black s3 cable to charge my note

that's how i do and i never encounter any problem from rom to rom, kernel to kernel

1,2,3,4,5,8,9

ok. im up to flashing modes now.

so i just go with flash system base ROM?

nvm..i opt for factory reset since im a first timer.

This post has been edited by sacremento: Jan 15 2013, 01:30 PM

i usually just direct flash kernel and swap mod all at once ..

u mean the monx aroma installer? pick the 2nd one, full rom

This post has been edited by zerohunter: Jan 15 2013, 01:36 PM

Goodluck bro

Info for all about the new bootloader and kernel

http://forum.xda-developers.com/showpost.p...&postcount=1325

I asked Dr Ketan yesterday and this is his reply:

What i believe is, exynose exploit is fixed with bootloader, after flashing new bootloader exynose abuse should not work. (it still works if your device is rooted)
while kernel patching was done (i heard on S3) for sudden death issue.

And his response to another post:
You mean for flash counter?
Of course it will check, even more smartly then older. More Difficult to set system status 'official' with new bootloader.

therefore what it means is that, don't get DLL7?

someone speak in plain english plox!

inb4 joytest thinks i'm dumb and do not understand plain english

ok everything went well but unfortunately it cant detect my sim? why is that?

seems like my baseband is unknown? stock baseband would be ok?

This post has been edited by sacremento: Jan 15 2013, 01:53 PM

show your about phone screen shot

baseband unknown?? the efs corrupted???

No, for the vast majority of people, getting the DLL7 will automatically give you a new bootloader. The bootloader is the part that begins when you switch on your phone, even BEFORE recovery.

In our flashoholism cases, the new bootloader may be bad for us coz it's harder for Triangle Away to defeat and switch status.

But since DLL7 comes with the new kernel that also patches SDS, it's still generally a good thing overall.

However, I'm unsure why would the root access patch be fixed via a bootloader while the SDS gets fixed in the kernel. It should be the other way around IMHO.

is that means rom flashing ppl should get AP for better support?

AP sets you mean? I don't think so, coz the bootloader should be the same for any N7100. They will only change the bootloader for the US telco variants.

lol...looks serious.

my s-pen is not working. my phone memory is only showing 241mb and its full.
cant take a screenshot.

even lost the imei numbers.

my baseband version is showing unknown.

from the status:

network, mobile network type, phone num, imei, imei sv is showing unknown.

so triangle away still work? u know lo SME warranty very strict sometime