Later I free I help you Teamview okay

blacktubi gastacopz

actually All rooter can dial,

u dont have to convert the modem into regular modem at all,.

just follow steps below:

-reboot your router
-plugin your E3276 modem
- login LuCI web interface
- sign in
- go to modem Tab
- go to Custom
- paste the AT command ( provide by blacktubi : AT^SETPORT="A1,A2;10,12,16,13,A1,A2")
- click submit
- wait for the submit done

* Key : you must paste the AT command FAST whenever you ON/REBOOT the router , otherwise the rooter wont able to recognize which port is which port,.


or you also can try TpLINK MR-3420 V2 latest beta firmware which support E3276
-> Latest Beta Stock firmware 130314-FI

Enjoy

This post has been edited by chuahcs79: Nov 4 2013, 09:10 PM

Main problem is E3276 dont have a standardize port mapping Rooter dont select the correct port. So, in order to get it fixed, set the communication port and data port manually.

BTW issuing the command during boot doesn't help at all, new port mapping will only take effect when modem reboot. Might take several reboot sometime.

This post has been edited by blacktubi: Nov 4 2013, 09:21 PM

you can ask him to try this first,.. a few user E3276 works with this method,
just though sharing only,.

after paste the AT command,

it will looks like this :

[attachmentid=3705805]
chuahcs79

Hi. How to make signal strength appear?
I'm using e398. TQ

This post has been edited by ioi84: Nov 4 2013, 10:41 PM

u can try these few solution :

1) try to update your firmware to latest

2) try to add E398 bin file into modem setting

if still cannot works, then is bug, original stock firmware have this signal bug,

so just flash to Rooter openwrt firmware -> http://www.ofmodemsandmen.com/downloads.html

below are step on how to flash from original stock firmware to Rooter openwrt


go to -> http://www.ofmodemsandmen.com/downloads.html

looks for TP-Link MR3420 V2

download this : Huntsman 2013-10-16 Latest Release

then go to your web interface 192.168.0.1

sign in

make sure you use Lan cable connection and not wifi

go to the last tab system -> firmware

click choose -> find the Huntsman 2013-10-16 Latest Release for V2 u download just now,

click ok to proceed,

then wait,. do not turn off router or make sure no power cut off,..

wait until the router fully done,

clear your browser cache

then login 192.168.1.1

direct click login for first time

then go to system -> administration -> setup your LuCI web interface password -> select Lan at below option -> click save and apply

go to modem -> connection -> set up your APN -> and click enable in keep connection alive -> click save and apply in bottom

now go to network -> wifi -> click edit -> set up your wifi SSID, Channel, channel Width, and your wifi password encryption -> click save and apply


after all above done, -> go to system -> reboot -> perform reboot


all is done and it will be auto recognize and dial and reconnect too,.

Enjoy

TQ boss..

if after u did all that still 0% signal, then it is a bug,. stock firmware buggy sometimes due to the support is not really up to date with newer 4G LTE modem

Already tried that beta version. Still no luck though

Emailed tp link... they already forwarded to related department

Don't know how long for next reply from them

did you try to paste the AT command method in rooter ?

Yup, still 0% signal showed.
Anyway, TQ boss.

I have emailed the E398 bug to TPlink almost 2 months ago. I have sent them the log, and all the details they need, and no news after that until now.

Don't give so much of hope to TPlink support team since the first report of E398 bug have been reported at March, until today, still no solution for that.

They don't even make any effort in solving E3276 issue

Not sure if Huawei hate them or they hate Huawei

TPlink team are just lazy ass, their 300mbps wifi adater driver for windows 8 STILL on beta, already one year since Windows 8 released and still beta? what a joke.

Why not use the latest driver from the chipset manufacturer rather TP-LINK customized, it should work

Mine one is V3, Qualcomm Atheros, Windows 7 driver are newer i think, got more option to tweak, i duno where to get the latest for windows 8.
Since they alreadt released V4, Realtek chipset, they probably already abandoned the older revision. just like how they abandoned the TLMR3420 v1

Search the adapter, know what is the chipset, search on the internet for the latest driver from Atheros base on the chipset

My friend also complaint about his MR3040 until he mad.
He said shame on you to the CS, and the CS replied please respect me, and blah blah blah lol.

Then my friend said, I said shame on TP link, not you.
The CS said, ok.

Lol.