Funny means?and how about sim swap?

Will cause any problem?

but until now i not yet reboot my router,.. since i first plugin E3276,.. so i guess your situation is fine now,.

Sim swap no problem, anyway if next time dont want detect again just input the command, use putty like that day I TV you or key in at router also can.

I cant do like you last time..so fast lol...

Maybe direct at router

paste command at router is much easier compare to putty for sure,.

stock firmware, never touch anything Wanna flash it to normal modem but there is no stock firmware to flash it back leh/
My AF23 can recognize E3331 and probably E369, on E3276 does not work, too lazy to bring it to Huawei service center...
I tried Rooter firmware once, it was so damn hard to use

E5776 local selling 265 SGD but i missed the chance, it's sold out now, but it's still expensive. (i bought E3276 at similar price, damn local distro are blood sucker.)
No need to turn of i think, standby time is long iirc.

the rooter is quite easy to use compare with original stock openwrt

any issue on rooter ? we can guide you, just post your issue, best with screenshot

Hello,
I'm using MR3420 V2 paired with Sierra Wireless Aircard320U and flash with Huntsman 2013-10-16red / LuCI Trunk (svn-r9915). I have 2 issues here:-

1. It can't connect to 4G/LTE. But working perfectly with 3G.
2. How to do bandwidth management with Huntsman? I need to limiting some MAC address/IP address download speed. TQ in advance...

1) your 320U able to connect LTE 4G with direct plugin computer USB or with V2 original stock firmware firmware before ?
if it did, then u can band config it to 4G only,.. under huntsman , under huntsmand -> modem -> network status -> change cellular modem -> select 4G only -> click apply mode change

or direct plugin computer USB port use MDMA to band config it to 4G 1800MHz or 2600MHz or both,..

or you can use AT COMMAND via putty to do so as well

2) there is QoS management under huntsman -> network -> QoS

1. Yes, I can connect 4G/LTE with direct plugin to lappy. Yes, I can connect with V2 original stock firmware.
Already try to band config it to 4G only. Not working.
Opss.. Never use MDMA or AT COMMAND via putty.. huhuhuh ( I dont know how to do it).

2. yeah.. i found QoS. but it really confusing. It really help if you can show me how to configure it. I just want to limiting 2 or 3 mac address.. they eat up my bandwidth. huhuh

This post has been edited by dee_death: Nov 7 2013, 12:09 AM

Mind if I ask what is your LTE speed on stock firmware?

I determined my speed with IDM only.
With stock firmware: Average 1.8MBps..
Direct plugin to lappy: average 5.5MBps.. (this is how I found Huntsmen.. to achieved this speed with MR3420)

refer back to your question 2

openwrt QoS will not limit the bandwith of a specific ip/port/service out of the box, the idea is that services/ports/ips with a lower quality will be served after others with a higher priority. Low priority services will still get the full bandwidth when no one else is requesting bandwidth.

so you can set those 2~3 address to low priority ,..

this is different than IP/Mac Address/Service Hard limit QoS like QoS in stock firmware

This post has been edited by chuahcs79: Nov 7 2013, 01:43 AM

I got the idea. thanks 4 helping me with the Q No.2..
How about the No.1? can you help me with that? thanks in advanced..

your can direct plugin your modem into your computer USB port,

download MDMA,

close your modem dashboard software if they pop up,

and wait the MDMA recognize your modem,

click band config,

from there, click what u need in 3G or 4G or 4G only,.. click apply,.

then plug it in your V2,..

Hi,
Anyone know how to flash back to TP Link stock firmware from ROOTER?

yeah,

just download your stock firmware,

and flash with lan cable only,..

This post has been edited by chuahcs79: Nov 7 2013, 10:45 PM

Thanks a lot.

sigh.... dunno what is wrong with my ROOTER 3420 and e398, it keep on failed to dial on maxis...

if plug the e398 on notebook, able to dial via mdma or mobile partner....

anyone facing same issue like me?