Outline ·
[ Standard ] ·
Linear+
Home Networking ASUS Malaysia Networking User & Technical Support, Managed by ASUS Malaysia Representative
|
enJiNer
|
 Feb 1 2015, 08:04 PM
|
Getting Started
|
QUOTE(sHawTY @ Feb 1 2015, 07:56 PM) AsusWRT-Merlin 378.50 BETA 2 has been released. Changelog: CODE 378.50 Beta 2 (31-Jan-2015)
- NEW: Added custom config and postconf support for avahi, netatalk
and mt-daapd (iTunes server).
- CHANGED: Moved the AC68U CFE update process to the same location
as in GPL 3626 to see if it works more consistently.
- FIXED: Non-DPI build of AC56U had incompatible Tuxera modules
- FIXED: vsftpd wouldn't start if you had IPv6 enabled.
- FIXED: Asus had disabled the NAT loopback fix on MIPS's iptables
in GPL 3762. Re-enabled.
- FIXED: Wireless clients that hadn't communicated in a while wouldn't
be properly shown on the Wireless log (patch by pinwing)
- FIXED: QoS rules weren't applied properly when IPv6 was enabled
(was changed in recent GPL - reverted it)
- FIXED: Can't apply a Custom DDNS if you don't have something entered
in the username/password fields (shown in other DDNS services)
- FIXED: NFS page wasn't properly loading Thanks bro.. So anybody ever try ddwrt?? |
|
|
|
|
|
theang123
|
Feb 1 2015, 09:24 PM
|
Getting Started
|
hmm now i have a problem... i duno my unifi password.
is there any default password or wat? coz i never reset it before. or should i call unifi to reset?
|
|
|
|
|
|
enJiNer
|
Feb 1 2015, 09:30 PM
|
Getting Started
|
Call unifi...i faced the prob last 2 days...i tot mcm stimix u can change it..
Unifi cs told me.it cannot be change by user...
This post has been edited by enJiNer: Feb 1 2015, 09:31 PM
|
|
|
|
|
|
xtracooljustin
|
Feb 2 2015, 11:45 AM
|
|
|
Just changed to a RT N12HP but i lost my Hypptv signal. Anybody can help?
|
|
|
|
|
|
giggsyy
|
Feb 2 2015, 11:57 AM
|
|
|
Hi guys, I just bought the asus router RT86U but i need to configure one of the ports (default port 4 for unifi RG332 router) to another dlink DVG5004s to connect more phones. How can I do that for RT86U? Thanks!
|
|
|
|
|
|
xtracooljustin
|
Feb 2 2015, 11:59 AM
|
|
|
QUOTE(xtracooljustin @ Feb 2 2015, 11:45 AM) Just changed to a RT N12HP but i lost my Hypptv signal. Anybody can help? Connected to Port 4 of the router and all is good. |
|
|
|
|
|
sHawTY
|
Feb 2 2015, 12:33 PM
|
|
|
QUOTE(giggsyy @ Feb 2 2015, 11:57 AM) Hi guys, I just bought the asus router RT86U There's no such thing as RT86U. It's either RT-AC68U or RT-AC87U. Which one is it?  |
|
|
|
|
|
giggsyy
|
Feb 2 2015, 03:03 PM
|
|
|
QUOTE(sHawTY @ Feb 2 2015, 12:33 PM) There's no such thing as RT86U. It's either RT-AC68U or RT-AC87U. Which one is it? Sorry RT-AC68U.   |
|
|
|
|
|
ha5h
|
Feb 3 2015, 12:39 AM
|
New Member
|
QUOTE(ASUSmy @ Jan 23 2015, 11:43 AM) Hi ystan91BEZSRD1, Below is the link to download the beta firmware, please do a factory reset after the firmware update and select Maxis Fibre IPTV as the ISP profile. Maxis IPTV Beta FW RT-AC66U https://www.asuswebstorage.com/navigate/s/C...B8C4C2350CB591YRT-N66U https://www.asuswebstorage.com/navigate/s/8...9F53C6F314A374YThank you Links not working ... where can I find the latest beta for AC66U? |
|
|
|
|
|
xpresside
|
Feb 3 2015, 05:39 PM
|
|
|
QUOTE(ASUSmy @ Jan 23 2015, 11:43 AM) Hi ystan91BEZSRD1, Below is the link to download the beta firmware, please do a factory reset after the firmware update and select Maxis Fibre IPTV as the ISP profile. Maxis IPTV Beta FW RT-AC66U https://www.asuswebstorage.com/navigate/s/C...B8C4C2350CB591YRT-N66U https://www.asuswebstorage.com/navigate/s/8...9F53C6F314A374YThank you anyone with these routers n maxis iptv tested the firmware? coz the thing that's stopping me from getting maxis iptv is the incompatibility of these routers |
|
|
|
|
|
Killmeplsok
|
Feb 3 2015, 06:19 PM
|
Getting Started
|
Using RT-AC68U, is there any way to set up a port range in the QoS page?
Like I want to put port 25000~25050 at high priority while keeping my websurfing at highest priority.
|
|
|
|
|
TSASUSmy
|
Feb 4 2015, 09:26 AM
|
|
|
QUOTE(theang123 @ Jan 31 2015, 05:23 PM) hi, i has just bought the rt-n12HP. can i know how many users can connect to this modem at one time? btw, i currently has 1 wiereless modem supplied by unifi, is it better if i use repeater mode or just use this one directly, my house sometimes got 15+ devices connected Hi theang123, The RT-N12HP, can connect at least up to 60 device. If RT-N12HP able to cover your house already, then you can just change to RT-N12HP instate. Here is the video on how to setup the router for UNIFI. https://www.youtube.com/watch?v=ESAPAJqWxH4Thank you |
|
|
|
|
|
TSASUSmy
|
Feb 4 2015, 09:44 AM
|
|
|
QUOTE(Killmeplsok @ Feb 3 2015, 06:19 PM) Using RT-AC68U, is there any way to set up a port range in the QoS page? Like I want to put port 25000~25050 at high priority while keeping my websurfing at highest priority. Hi Killmeplsok, You may do so by putting port range like 100:150 or >100 or <150. Thank you |
|
|
|
|
|
red.mosquitos
|
Feb 4 2015, 04:34 PM
|
New Member
|
QUOTE(ASUSmy @ Jan 23 2015, 11:43 AM) Hi ystan91BEZSRD1, Below is the link to download the beta firmware, please do a factory reset after the firmware update and select Maxis Fibre IPTV as the ISP profile. Maxis IPTV Beta FW RT-AC66U https://www.asuswebstorage.com/navigate/s/C...B8C4C2350CB591YRT-N66U https://www.asuswebstorage.com/navigate/s/8...9F53C6F314A374YThank you ASUSmy, any idea when full version will come out. TQ |
|
|
|
|
|
thivaakar
|
Feb 4 2015, 06:15 PM
|
|
|
Good Day gentlemen.
Please suggest me a good wireless router to replace my current router provided by Unifi.
My office is on BIZ20 package with 10users.
|
|
|
|
|
|
voncrane
|
Feb 5 2015, 11:46 AM
|
|
|
QUOTE(thivaakar @ Feb 4 2015, 06:15 PM) Good Day gentlemen. Please suggest me a good wireless router to replace my current router provided by Unifi. My office is on BIZ20 package with 10users. Handling 10 users should be a piece of cake. However, in order to give recommendations... What are your Needs? Feature requirements? Wireless range? Budget? Acceptable lan transfer speeds? etc. |
|
|
|
|
|
rip_code
|
Feb 5 2015, 12:31 PM
|
|
|
Hi,
My unifi got the IPv6 from ISP but it seems my laptop with wireless connection could not surf IPv6 website...
|
|
|
|
|
|
urgo88
|
Feb 7 2015, 06:26 AM
|
Getting Started
|
Hi, I'm using RT-N14UHP (192.168.1.1) as a wireless router connected to a bridge modem (Aztech 605E). How can I view the ADSL connection statistics of my Streamyx connection?
|
|
|
|
|
|
mkamal1976
|
Feb 7 2015, 10:48 AM
|
New Member
|
Hi guys, I need some help with my asus rt-ac68u. My unit suddenly stop working and the asus logo at the back and the power LED starts blinking fast. Tried power off, power on + WPS button (reset NVRAM), power-on + Reset button to get it into recovery mode also failed. Packet capture doesn't detect any traffic from the unit. Any ideas ?
|
|
|
|
|
|
sHawTY
|
Feb 7 2015, 11:23 PM
|
|
|
AsusWRT-Merlin 378.50 STABLE has been released. Changelog: CODE 378.50 (7-Feb-2015)
- IMPORTANT: You must do a factory default reset, and manually
reconfigure your setting if coming from a version
older than 378.50. Failure to do so can
lead to various issues with wifi, OpenVPN,
and the new AC68U bootloader.
- IMPORTANT: Please read this changelog, especially the changes
related to jffs, user scripts/config and OpenVPN in
the previous 378.50 betas.
- NEW: Merged with Asus GPL 378_4129 code.
- CHANGED: Reverted back to vsftpd 2.x, as 3.0.2 doesn't work properly
on MIPS architectures (and possibly other particular
scenarios as well).
- CHANGED: Added warning to the DDNS page if you set the type
to Custom and either JFFS or custom script support isn't
enabled
- FIXED: A few unescaped quotes in the French dict breaking VPN pages
- FIXED: MAC list would get corrupted when removing and re-adding
entries on the MAC filter list
- FIXED: AC68U CFE update wasn't written to flash due to permission
issues
- FIXED: Static Key field wasn't visible when using HMAC authentication
- FIXED: syslogd was always enforcing the -S switch
- FIXED: When setting a static DHCP from the networkmap, the user-entered
name wouldn't be used. Now it gets used, and we rely on the rc
daemon to properly handle it if it's not a valid hostname (it will
simply not provide it to dnsmasq's static name list). |
|
|
|
|
Quote
0.0270sec
0.87
6 queries
GZIP Disabled