TQ for you reply. The numbers are as per Engineer's plan and all I need to know whether these are standardized or normal quote for piling.

The contractor told me that it will be lesser if the requirement reduce but as a layman, I find it very expensive and what you think.

Appreciate and thank again.

Hi Tom Jason,

Since you used 16mm2 Cable size, your house incoming supply is 60A 3 phase supply, armoured or PVC cable?

Can you share or PM me your buying list in excel sheet (if you have) for my own purpose house rennovation?

Thanks

If the engineer's plan said so then there's no argument there.I used to build an elevated water tank and we only need 60 something points.Your house must be very big then and your soil is soft hence the needs for numerous amount of piles point.

Other than the things I've mentioned the rate seemed reasonable enough for me.However please bear in mind,it's in provisional quantity meaning that the more they do the work,they more u'll have to pay.If the number of piles used reduce,then it will be below 68k and vice versa.

Cheers!

hi tomjason,

Can u pm the formula to estimate the renovation cost. I am planning to start my renovation in a month or two.

Thanks

item
1. high, normally <5k in klang valley for 1st rig, 3k for 2nd rig
2. reasonable
3&4 . normally started pile with shoe more expensive than extension pile +-rm10
5. reasonable
6. market rate
7. on high side, weld joint for 7" <rm15
8. cut off pile above ground or cut off after excavate for pilecap? request for diamond cutting after excavation..no double handling
9. PDA market rate 1st rm1200, subsequence rm800-1000 depend on nos

---

Added on December 25, 2012, 2:54 pmby looking at the quantities allowed, i doubt the soil is soft, 124 point and only allow 124 starter & 124 extension, meaning only max 12m per point, sometime the engineer just simply taruk as much point one

This post has been edited by skng03: Dec 25 2012, 02:54 PM

Hello TomJason

I would be very grateful if you could PM me the formula, please?

Great discussion and information, by the way. Thanks a million.

---

Added on December 26, 2012, 1:14 pmOoops, just realised that the formula is off the market. Will come back with queries when the time comes.

Thanks.

This post has been edited by ANNRealtee: Dec 26 2012, 01:14 PM

Hi Brother,

I wanna ask 1 simple question, my house is MPKJ control. For the small road from outside my main gate until main road, now is tar road (except the 3 feet after gate i olede change to tiles), can i make it to simen floor? Coz my contractor told me since i had draw plan and summit to MPKJ, when they come to check, i will kena saman.

Please comment as i do not trust fully my contractor, TQ.

[quote=skng03,Dec 25 2012, 02:50 PM]
item
1. high, normally <5k in klang valley for 1st rig, 3k for 2nd rig
2. reasonable
3&4 . normally started pile with shoe more expensive than extension pile +-rm10
5. reasonable
6. market rate
7. on high side, weld joint for 7" <rm15
8. cut off pile above ground or cut off after excavate for pilecap? request for diamond cutting after excavation..no double handling
9. PDA market rate 1st rm1200, subsequence rm800-1000 depend on nos

---

Added on December 25, 2012, 2:54 pm


Appreciated and TQ

sorry for late reply very busy now...

bro,

what is your reno size and land size?

---

Added on January 3, 2013, 2:18 pmhi bro,

what reno you want to do?

---

Added on January 3, 2013, 2:19 pmwhat reno you want to do?

---

Added on January 3, 2013, 2:29 pmsure armoured cable..my 16 mm cable is Mega brand..

i hv almost 90% of the receipt buying list..i kept all...some i hv already put in excel....for my reno i update detail every day in excel the progress...

inform me what price you want to know?

---

Added on January 3, 2013, 2:29 pmwhat reno you want to do??

---

Added on January 3, 2013, 2:35 pmhi bro,


it depend on Majlis... i hv just finish cement all my pavement infront on my house near the road and shifted the 'tong sampah' area near the road side...hope you can image..or later i can post the pic

i suppose your case to cement the pavement should be no problem unless you wan the shift the tong sampah like mine...

This post has been edited by tomjason: Jan 3 2013, 02:37 PM

good info.

can somebody quote for conversion from tnb to solar panel ?

anyone know thickness of 2nd floor concrete slab?

Thanks brother, my house no tong sampah area, even no built in tong sampah. So tong sampah will just put outside oni...anyway, thx for your advice!

u r welcomed bro...



-------------------------------------------------------------------------------------------------------------------------------------------------------


i not an expert but just help what ever i know to you all....i hv many requests for consultancy and i did gave..but easier if you can call me cause i hv limited time to typing...i still give free consultancy but i also willing to give site visit to serious house owner that want to reno but for site visit i hv to charge a little 'duit minyak' or 'duit penat' and for site visit i will bring indon worker...ialah..i hv to pay the car fuel and duit minum teh tarik to the indon worker.... you can call me at 0137440012 but Not at Night pls...that my rest time with family...for site visit only near to my house shah alam such as subang bistari,subang perdana,setia alam, kota damansara, shah alam sek1 - sek 30 etc near to shah alam....for site visit at saturday or sunday...

during the site visit i will give consultantcy, proposal and quotation. If you want then you can direct deal with the indon contractor/worker that i brought along or you can take other contractor. In that basis, if you wan to take other contractor, then when you deal with other contractor you will not be cheated.

This post has been edited by tomjason: Jan 9 2013, 01:48 PM

Hi intention to convert my back lane area into dry area for keeping barang.
Make a concreate cement with 6 feet wall brick the put awining and grill.

1) Convert the grass soil to concreate cement with Y12. 10 x 20, thickness of 5 inch

2) Brick wall with plaster. 6 x 20

3) Grill with powder coating. 3 x 20

4) Steel awning 20 x 10

5) Create a 2 paip outle plus one drainage for sink.

Do you have any 'reliable' electrician? I need to do some rewiring for air con and oven.

need help here?

between 5 inches to 6 inches less than that has strength issue. depend also on the contractor method of makin slab, the highest strength is using rebar bar Y10/Y12 compared to BRC.

any recommendation for skim coat material & sealer to remove hairlines / cracks?

Hi! Bro, can pm me the formula ? Much appreciated..

This post has been edited by kenstarlw: Jan 12 2013, 12:06 PM

A quick question.. Which one is to be done first? Sealer to remove hairlines on walls then skim coat or the other way round?