chuahcs79 can open a business already
just follow chuahcs79 video on youtube, you will flash to openwrt with no hassle

This post has been edited by azim61: Nov 6 2012, 03:54 PM

this is not really for business la,

if they wanted my help, i dont mind as can help them out,

they can buy the router and send to me for flashing too, if they wish

followed already but I'm afraid maybe I'm using win 8 that why ICS not working properly. Will try with Win7 tonight and hopefully can flash openWRT successful

This post has been edited by caterpiez: Nov 6 2012, 03:57 PM

Let's bincang about price shud we?

yes very noisy and have to clean the dust on the modem and router every week. if not the dust will be very2 thick....i rent a newly built house, so there is so much dust in the house...even after living for more that 5 months.....

i dont hang the modem in anyway....i just plug it in to the router directly, the router i drill two holes and put it two screws and hang the router there. just like hanging a picture frame....

the result of connecting the modem straight to the router vs using usb cable is very2 significant.....now ping stable and got better upload speed, i guess download speed is just limited by my tower....huuuu

---

Added on November 6, 2012, 4:38 pmhey i tried to check for my signal on openwrt but this came up, any solution?

root@OpenWrt:~# gcom sig /etc/ttyUSB2
Trying list of devices
comgt 08:38:09 -> -- Error Report --
comgt 08:38:09 -> ----> ^
comgt 08:38:09 -> Error @133, line 8, Could not write to COM device. (1)


This post has been edited by aliex87: Nov 6 2012, 04:38 PM

try to change from USB0-2

i dont understand, can you show full command?

command:



or



huawei normally is USB0

zte normally is USB1

This post has been edited by chuahcs79: Nov 6 2012, 05:35 PM

anyone knows how to open the case of MR3420? I plan to modify the white color case by cutting some holes and attach cooling fans (1 fan blow in + 1 fan blow out) on it.

just kopek the 4 black sticker at the stand and got screw under it.

---

Added on November 7, 2012, 1:54 amsuddently i can connect to my router using telnet and now my router is coming back alive!! thanks to brudder kizwan who tell me that my router is not brick yet if the LED is still lighting!

This post has been edited by ajoi57: Nov 7 2012, 01:58 AM

Result after open up the Router cover,

now the server fan blowing directly to inside board
hope the router dont catch cold,
[attachmentid=3142589]

see the bandwidth Bar green color super stable
[attachmentid=3142588]

noticeable different after open up router cover, performances is much more stable with ZTE MF680 now,. i think issue all these while is my router quite warm inside, that's why

---

Added on November 7, 2012, 3:51 amtry to flash again with Openwrt, guess this time lucky confirm will get it done

This post has been edited by chuahcs79: Nov 7 2012, 04:37 AM

guys, anyone had any issue your modem cannot get into hspa+ signal? im having this problem....the modem connected already and can use internet and all. but the led on my modem only show blue (3g 384kbps) led....sometimes it takes a while then it will turn cyan (hspa+) all of a sudden! sometimes it wont change at all until i do reconnection.....

when it connected to 3g (blue led), the speed is very2 consistent at 384kbps..... anyone have any solution to this?

Giv a brief history of your modem like

1) Model and make

2) FW version or have you flashed it recently or stock FW

3) Did you Supercharged it.

4) Did you used an extension cable.

5) etc, etc ...............

could be signal problem, if your RSSI via MDMA is below -70dBm, get a Patch Antenna. Blacktubi have very good Patch Antenna for sale

i sked oledi maybe i will try soon la.

where's your location? I'm still failed flashing open wrt want to cry already

why failed? i followed the guide on the first page and one time try only, now up and running smoothly!

Not sure.suspect maybe because i'm using win8 and connect 3g using mdma not dashboard.my dashboard doesnt recognized the modem after upgraded the firmware