try rev high when u enter the straight road
if u use normal rev/RPM....sometime not possible or slow
rev higher like sports car...u need to rev up the RPM only the speed is possible
as u know CVT purpose is to save fuel...not race...so u need to intentionally rev high

that is the characteristic of CVT, you need to give more acceleration for speed, while without pressing acceleration, the car slow down faster compare to AT transmission because the CVT apply the engine break itself... you need to continuous accelerate above 5,500 rpm to get to top speed... since u said MEX got longer distance of straight road, then u can try accelerate to 6,000 rpm and let us know the top speed u gain...

I totally agree with you!!

Never feed the troll. Always report the troll.

If the auto brake lock does not require you to cut any wires, i don't think your warranty would be void.

As for your FC, my advice is, instead of spending thousands to save that few ringgit in fuel, spend a bit more effort to

1) control your driving (avoid revving hard)
2) maintain tire pressure, regularly (e.g. 2 - 3 weeks once)
3) service the car regularly

These things don't cost you any extra money, but they give you, arguably, the best impact on your fc.

Relax, bro. No use wasting your time like that. You're better off just clicking the report button and then resume enjoying your own life.

For me, auto BLM, I can reach 160kph easily on the road to klia.

And yes, you really need to push the revs higher. I just floor the pedal and see how fast it can go, sometimes.

This post has been edited by +Newbie+: Sep 17 2011, 04:34 PM

bro, i bought mine from a seller in lowyat diy wan i try find the link again bah

---

Added on September 17, 2011, 4:33 pmhttp://forum.lowyat.net/index.php?showtopic=844204&hl= here u go

This post has been edited by someone_stupid: Sep 17 2011, 04:33 PM

just now i brought my car to wash
they spray high pressure water all over the car
thn i intentionally go check for water
fog lamp = no water
head lamp = no water
rear plate light = right side got bit bit moisture inside...and the case seem very blurry already...not very transparent already

and my rear "embled" got "1.3" and "saga:
want to ask..are they made from different material?
cuz the "saga"..part of the word already torn off and some want to fall down already...and it has that rusty look(got black dots)
yet the "1.3" looks brand new!

i dun know why u all so furious about.i didnt bash anyone here except siuyi. i m juz telling the fact and i didnt force u all to change to myvi.so plz make it clear.saga blm really have problem i know some of u dun wanna admit. juz sharing here.sharing is caring.=)

pls go back to myvi thread
i own a saga blm...1st batch...until now no major problem, no vibration, no leaking...no nothing

bro. He's not worth your time man. Just report the fella and ignore him.

If you really cannot tahan edi, then go to his profile and click ignore user.

2 x [RM 1.50 + RM 2.50 + RM 4.30]

FFFFFFFFUUUUUUUUUUU!!!!!!

Juz to clear the "air"...???

TQ very much for being a "gentleman" and admitting that yu DID BASH SOMEBODY!
To quote yu : "...i didnt bash anyone here except siuyi."
And the above simply meant yu did bash someone here, namely Siuyi...Can yu really understand wat yu're saying yrself?

Next also quoting you but merely replacing yr "myvi" with "Saga" & vice-versa :
"... i m juz telling the fact and i didnt force u all to change to Saga.so plz make it clear.myvi really have problem i know some of u dun wanna admit..."

Clear enuf? Your own words going back to you!!!

So, fren, yu enjoy yrs & let others enjoy theirs. Be happy yu're blessed 2b able 2enjoy yrs & others are similarly blessed 2enjoy theirs!

God is fair. So yu play fair, too.


This post has been edited by zeone: Sep 17 2011, 05:11 PM

zeone: wana ask u ah where did u get the abl from?

u not necessary to go from one end to another end of highway to test the top speed bro
once u get the top speed, couldn't raise anymore, make an u-turn and back home... lol

mana boleh simply u turn, accident nanti. XD

bro, does this material really make huge different on the sound proofing or slightly?

---

Added on September 17, 2011, 5:17 pmLOL
not ask u to u-turn straight away, but going to the next exit and turn back...

This post has been edited by gogoman86: Sep 17 2011, 05:17 PM

slightly only, though it does sound better with it than without it, don't know how to explain but engine sound and tyre sound is the loudest i manage to cut down outside noise with this i think

Ok. No prob wan.
Got my OEM ABL unit from Sh@rty5...
His latest thread in Automotive Garage in link :
http://forum.lowyat.net/index.php?showtopic=2005329

Try contact him thru PM.

Enjoy...

This post has been edited by zeone: Sep 17 2011, 05:20 PM

the nearest place I can turn back is i think that big roundabout heading to LCCT. Others is just a chain of highways connecting MEX, PLUS and Putrajaya Link.

Have to pass all three tolls. lol

zeone: cool thanx bro will pm him immediately!

wow...
then u test the top speed some other day when u pass there, not necessary going now, waste of time/money/petrol...
btw, have u did any DIY to your car? (auto brake lock, sound proofing, door rubber, skirting, spoiler?)

---

Added on September 17, 2011, 5:34 pmand one more, V12Kompressor, can u do me a favor, check the back rear wheel, does it come with wheel arch?
like this one : http://www.audiworld.com/tech/pics/misc28-image007.jpg

This post has been edited by gogoman86: Sep 17 2011, 05:34 PM

readjust the front number plate

thats all.

all those wait later first. After the 3rd year then I might do something major. Finding diffusers for the FL/FLX is like finding a needle in the Atlantic Ocean.

---

Added on September 17, 2011, 5:38 pmnow raining... cant go down to take a look (open air parking)

But IIRC, I dont recall seeing black piece on the wheel arches when I am checking my tires a few days ago.

This post has been edited by V12Kompressor: Sep 17 2011, 05:39 PM