Just get rid of the screen lock, like me............ Last time I have 3 locks before I can use my phone. 1st is opening the leather flip case, 2nd pressing a physical button to light up the display and finally unlocking the screen.........what a hassle. What I did was to install Battery Indicator( it is used to indicate the battery level with a numerical value in your notification bar) to disable the screen lock. You have to unlock one time when you power up/reboot your phone after that it is straight into your home screen when you light up the display. Another useful app is Silent Bot, useful when you don't want that irritating sound when you switch on or off your phone, not to disturb your partner's sleep. It will only work if it is installed in the phone memory and not the SD card.

This post has been edited by cwleong59: Oct 10 2011, 09:10 AM

Any latest price for this?

going rc2 from csl rom or wellcom rom got any diff?

How often do you guys experience the overheating/crazy screen problem? And under what circumstances? I have been somewhat eyeing this phone and I read about this issue about the phone, which became the main drawback.

And is there any way to prevent it from happening? Eg: Flashing rom, tweaking cpu and stuff?

You better READ first post properly, everything is there

Very rarely actually, unless you run CPU intensive task all the time. Lowering CPU speed helps, and if you install DooMLoRD custom kernel you can reduce voltage as well but this is advanced stuff and could result in hang/lockups

This post has been edited by Najmods: Oct 10 2011, 05:12 PM

read the 1st page...

I followed these steps and was able to install RC1.. gud luck

How to update ROM:
1st method:
WARNING: Make sure you have at least 50% battery capacity before continue!

1) Extract the ZIP file, rename the .nb0 file to firmware.nb0
2) Copy the file firmware.nb0 to your SD card. Make sure it is placed in the root folder (not saved in a folder) and turn off your phone and enter bootloader.
3) To enter bootloader mode, press and hold volume up + down + power buttons until you see the image of the Android logo with exclamation mark.
4) Press ‘Home’ key to show the update utility. Use the volume buttons to select the option “Download nb0 from SD card”. It is recommended that you wipe clean/format all the caches before continue with update process
5) Press ‘back arrow’ to confirm.
6) Reboot your phone, it took some time on first boot so patience

This post has been edited by nekton: Oct 10 2011, 08:16 PM

wts mi410, rc2 rom..2gb..bought end of august 2011..(all in box)
with black back casing (rm45)
asking for rm700 (nego abit)..
reason sell, need money..student..
thx..

I am the odd one out here, I tried RC2 before going WellcoM's

difference... I prefer the WellcoM stock ROM's user interface, the boot sound & visual is a bit silly but I learned how to change it afterwards...

performance wise, just root it & modify from there, e.g. bloatware removal, replacing kernel with tweakable one & overclock + undervolt etc...

most importantly, it has NONE of the annoying bugs from CSL's ROM... yet retaining the "originality" feel

p/s: assuming weak GPS signal & touchscreen axis inversion bug are hardware issues

This post has been edited by ashyxt: Oct 10 2011, 08:27 PM

Yup! thats what i did..... here's the steps..


Replace the original Recovery with ClockWorkmod
First Step

First step: Replace original recovery with ClockWorkmod Recovery
1. Download ClockWorkMod Recovery
2. Put the device in download mode (Power+Vol Up) and connect to PC,
and the PC will recognize the device as Removable Disc/Storage open it and you will find FIH > Image folder and select recovery.img, copy it anywhere to your PC as backup just in case if anything go wrong
3. Replace recovery.img in 'image' folder with recovery.img inside the Clockworkmod Recovery v4.0.0.9 you download and extracted earlier
4. Disconnect device from PC, open up the battery and reboot.


Second Step
Download a copy of RC1
Install RC1 using Su 2.3.6.3


DO FIRST STEP FIRST: Rooting the phone
1. Download Su 2.3.6.3 signed.zip and put it in sdcard (but don't put it in any folder)
2. Put the device in recovery mode (Power+Vol Up & Vol Down)
3. Select "install zip from sdcard" and select "Choose zip from sdcard" and search for 'Su 2.3.6.3 signed.zip' and click install.
4. Select "back" and click "reboot system now"


Third Step
Install RC2 Using CWM


WARNING: Make sure you have at least 50% battery capacity before continue!

1) Extract the ZIP file, rename the .nb0 file to firmware.nb0
2) Copy the file firmware.nb0 to your SD card. Make sure it is placed in the root folder (not saved in a folder) and turn off your phone and enter bootloader.
3) To enter bootloader mode, press and hold volume up + down + power buttons until you see the image of the Android logo with exclamation mark.
4) Press ‘Home’ key to show the update utility. Use the volume buttons to select the option “Download nb0 from SD card”. It is recommended that you wipe clean/format all the caches before continue with update process
5) Press ‘back arrow’ to confirm.
6) Reboot your phone, it took some time on first boot so patience


Fourth Step
Enjoy!!:)

---

Added on October 10, 2011, 10:42 pmDownload Link:

FB0G_Andro-ID_V3.3-RC1.7z
http://www.mediafire.com/?2zu044iwnodpu99
http://uploading.com/files/526ced52/FB0G-A...ID_V3.3-RC1.7z/




Andro-ID v.3.3 RC2
http://www.mediafire.com/?25ynftw5ax324bv



Su 2.3.6.3
http://www.mediafire.com/?q3ujsx1m4uq1662


All credits to Najmods[

This post has been edited by nekton: Oct 10 2011, 10:50 PM

i guess most of the android phone have weak GPS delay detection...

my brother has a ZTE Blade, it locks within 10 seconds indoor, that's especially why I got butthurt lol...

That's not true. My HTC Wildfire S locks on to GPS within 5 secs outdoors on inside car. GPS doesn't work inside house or buildings.

i turn on Assisted GPS n it locks within 5-10 as well on my mi410 of course.

Are there any other annoying issues that I should take note of when buying the phone and could they be solved easily?

Thanks for your help

I believe most would prefer the vanilla GPS to fix quick due to data usage required by A-GPS...

ditto that.

Officially reporting to the club. Hello everybody!

currently in serious consideration buying this phone. What about MIUI rom development for this phone. Last time I've read, saying still got some bugs and FM radio is not functioning..

okey. already bought one.
read here that stock rom sure got many problem
then think to put custom rom lor.
so which one u guys suggest.. good nice and fast.. hope stable also