huh.. i didnt do recovery by partition ar... it original come have the recovery partition..or u delete it??? normaly i m hiding it but just wan make the recovery dvd but fail... so leave it there 1st... after burn the dvd i will hide it again...


This post has been edited by fariz: Aug 5 2011, 10:35 PM

Sifu lee, this is my temp after doing the intelburntest just now... the Coolsense is in Performance Optimised mode, ran it under U2 cooler....
Is the temp considered ok?



Attached thumbnail(s)

No drill.. only results.. for intelburntest

Stress level : Standard
Times to run : 10
Threads : Auto

Max was 80,84,85,78

Stress level : Standard
Times to run : 10
Threads : 8

Max was 79,82,84,78

Setting done on table, air con room but can't really considered as air con room because it is not cold at all..



1 thing i noticed is that in Coolest mode, my max core was rev at 1996Mhz for all core while Performance Optimized mode can get me to 2894Mhz for all core.

And for auto threaded versus 8 threads,

I found my cores are running up and down using auto while 8 threads runs at all time high..

going back kl this week. going lolyat to buy ic7.. if there are anythere.

extreme version

not diamond ah? we on the same page? I mean i am going to get the ic7 diamond thermal paste.

Might even make a video of me doing xxx the repaste.. haha..


This post has been edited by fariz: Aug 5 2011, 10:32 PM

Please do make the video!!!! I also want to reapply thermal paste, was planning to send back to the troublesome/bothersome hp service centre and wait for 3 days again, but would be EXTREMELY delighted if you can make a tutorial video on how to apply the thermal paste ourselves!
Btw, can recommend which thermal paste is the best/most effective? Me noob in thermal paste section

This post has been edited by fariz: Aug 5 2011, 10:31 PM

Seems higher compared to others.
Can try one more time? This time download Throttlestop from my sig. Run it and tick 'disable turbo' then 'save' and 'turn on'.
Speed will decrease, but we will see how much the TurboBoost cause extra heat..

ok, will try again with the throttlestop. Will post again after test.

Oh my...Mine even higher
I ran intelburntest and my max temp i got is
88c 92c 93c 88c

done in : slightly air con room. maybe like 25C++ , HP CoolSense Coolest, no cooler just on wooden table.

takes quite long to run but the max temp was definitely way too low! and without turbo bost, the max clock speed is only 1996Mhz..

Sifu lee, this is my 2nd test.
this time, i tested without switching on my Radeon HD6770M GPU, the one i tested earlier is while the HD6770M is ON.
The coolsense is set at Performance Optimised, ran under the U2 cooler.
The throttlestop i did what you instructed and this is the result.
So, what can we infer from this result?

---

Added on August 5, 2011, 4:08 pmYou ran under what condition? Can state clearly thee variables? Like, what environment, the coolsense settings, using with or w/o cooler and etc. Can provide more accurate information for the sifus to judge....

This post has been edited by rurushu: Aug 5 2011, 04:08 PM


Attached thumbnail(s)

rurushu, somehow your result seems to be better then me but my temp are lower then yours. mine never passed 1996Mhz wor..

@rurushu, did you close that openhardware monitor before doing the second test? Because after disable turbo, the max speed should be 2.0GHz and your hdd quite hot...

Mine is

77
81
81
77

HDD is 41

Whats the good temp for HDD ?

I ran on U3 cooler only. My room is pretty hot today and my laptop on U3 is on the bed, maybe the bed emits heat ..

sifu lee, is it possible to push my core more if the temperature is dropped more and under more cooling environment?

Push like what? Overclocking?

hdd 42°C r normal sifu lee..

---

Added on August 5, 2011, 4:33 pmbelow 40 mean good but 41-42 should be ok!!!

This post has been edited by ngkhanmein: Aug 5 2011, 04:33 PM

I like HDD to be around 30-35C

sifu lee, if compare me and ruru, his result is better but hotter by +-2/3 degree.. so how to get a better result? better thermal paste?

and i also like my HDD at 35~

Don't think the temp would affect performance much at the 2.0GHz, it could be your background running program..