yes....if u refer to dfi overclocking database....normally they will up the chipset voltage....
y not u up the voltage and see how...

This post has been edited by Hungry_Wolf: Apr 24 2006, 01:54 AM

ok, thanks for your help. I raised 0.05v and successfully boot into the XP. now running the Prime95 for the stability testing for a night... bump to you...

how much u set? 1.55v? watch the temp..

yah, i set the chipset voltage up to 1.55v

y not set it x3 using Athon64 Tweaker?

Your mobo allow Vcore adjustment..but..with Only CnQ Adjustment CPU like Sempron3000+ and Above and Athlon64. You should get S64 3000+.

hi, i would like to ask :

divider 10


divider 12



which would be better for performance, stability and any other issue ? both ram timing are different. im using 1gb KVR.

any other method of overclock ? what is the most stable clock to run for 24/7, 365 days?

im using stock cooler. might change in future.

more fsb = more horse power... try to lower ur cas settings... if ur ram is ddr400, it should b able to do 2.5-3-3-7... it will even put more power to ur processing speed...

for me...more frequency is more advantage in gamming and loading.

the more the fsb, the better overall your system performs
the best would be 2.5/3/3//7 and max out your memory fsb

kvr what chipset? if gt good chipset like hynix or samsung, i think u can do 2.5-4-4-5 at 250MHz....

i believe ur proc can do 300HTT*8=2400MHz at default vcore....
then u use multi 10 to run your ram at 240MHz@2.5-4-4-5....

i thought performance ram like corsair or ocz only can do that kind of tight timing. i will try later

i dont plan to stress my cpu too much yet. im not even use the cpu for more than a month lol...

but i would like to overclock to a clock where it is super-stable for 24/7 without fearing the cpu might burn or face system unstability. actually, i very often play games. does overclocking brings negative impact to the cpu in the long run?

yea sure if u torture it too much
but scare wat?3 yrs warranty for u to play
unless u burn it til black mark, else it may onli damage component inside, which i think should be able to RMA
but my sempron@1.55V 2600mhz running for 6 months edi, very often on for 24/7, no prob thou.

Is sempron really that bad? Becoz my 3Dmark 01se is rather low to compete with my friend who has A64 @ 2224MHz, x800 pro @ default, 512MB but mine is 2.4Ghz, 7600GT @ default, 384MB. He managed to get 26333 but mine is 19457. Quite low rite?

i heard ATI card 3dmark very high one
or 3dmark01 is cache intensive app, so sempron lose
u try run cpu mark in 3dmark 06, pretty gud app to test ur proc, but those dual core score freaking high in tat...
sempron is NOT BAD, in fact it is jus a lower cache a64!

super pc....how is your temps now ar?? at vcore 1.65v?

Bro..you both got a different GC. If both 7600GT. Then can compare the result.

eventhough we are using the different GPU, but then the gaps wont be so ranged, rite?

the difference is big!!! trust me..hehe..try compare geforce 4 mx with 6600gt and see..hehe..same processor, different display card...

gf4 mx is dx7, 6600gt is dx9 then how come compare ah? x800 is dx9 and 7600gt also, they are on the same line then able to compare eh...