Sempron64 2500+ , 2800+ OC tests
|
|
 Mar 23 2006, 02:08 PM
Return to original view | Post
#1
|
 
Senior Member
8,753 posts Joined: Jan 2003 
|
zx7177 and sidewinderz..
u guys using infenion ram.. why i can only achieve 255fsb while using 166mhz divider? i thought it's less than 210mhz ram.. but when i set 1:1 easily can get 235 with 2.5-3-2-6 1T same ram timing for 255fsb.. any timing to recommend me? or should i reduce the HTT |
|
|
|
|
|
Mar 23 2006, 05:23 PM
Return to original view | Post
#2
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(low yat 82 @ Mar 23 2006, 04:23 PM) hw much volt u put to it? btw, try put 2.5->3 and also 2 -> 3 ...ermm try much looser timing so u can hit higher fsb i use default volt 2.6.. how far can put 2.8? infineon don't need high volt right?btw, d ldt put 3 or 3.5.  tried loose timing but still can't go.. that's why put it tight.. hynix like loose timing.. but infineon seems dislike.. i'll try tonight to increase volt and play with the timing again.. This post has been edited by 8tvt: Mar 23 2006, 05:23 PM |
|
|
Mar 24 2006, 12:21 PM
Return to original view | Post
#3
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(low yat 82 @ Mar 23 2006, 05:26 PM) thne it is better to wait other formmer using d d same ram and dhip wit yar to giv recommendation... that's why i'm asking them.. so can guest suitable setting..  QUOTE(zx7177 @ Mar 23 2006, 05:50 PM) my be-5 tops out at about 230 2-3-2-5 at 2.7v IINM my ram 1:1 can got 235mhz @ 3-2-6 with 2.6v and 2.5cllast night reduce HTT to 3x can go 270 with 166mhz divider same timming.. around 220mhz... haih... want to squeeze more.. even 2.7v not stable.. still can't manage to get best timming.. play safe at 267fsb with stock cooler.. cpu 2.4ghz so far...  |
|
|
Mar 24 2006, 02:31 PM
Return to original view | Post
#4
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(zx7177 @ Mar 24 2006, 01:12 PM) HTT said to be not much diff in OC'ing and performance drops(read in DFI Street IINM) yup... before that i'm using 4x cannot boot above 255.. maybe exceeded more than 1020 so not stable... while dropping to 3x the HTT quite mild on 810..they said even if you lower it to 1x , it supposedly still feeds enough data to teh processor thinking to increase fsb coz i think still got ample place to OC the ram.. just need to be patience to test them... or maybe must think about cooling part..  |
|
|
Mar 24 2006, 03:17 PM
Return to original view | Post
#5
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(zx7177 @ Mar 24 2006, 02:57 PM) minel lucky at 3x still can boot at like 340 267*3=801 still got space..cause as i remember , it has to be below 800 or sumthin 235*4=940 still ok.. that's why want to try again.. 340*3=1020 should be ok near the ceiling.. great.. |
|
|
Mar 24 2006, 05:02 PM
Return to original view | Post
#6
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
i'm afraid u will burst the curcuit..
reduce the vcore cannot raise the speed? how u check the temp? software cannot rely though.. |
|
|
|
|
|
Mar 28 2006, 09:42 AM
Return to original view | Post
#7
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(sidewinderz @ Mar 28 2006, 08:16 AM)  hehehehe....2.66ghz at 1.61v....not too bad la...planning to get TCCD...  but now 1gb rams dun seem to be enough to satisfy gaming needs...and UCCC still cant go DDR600 yet...  too bad mine end up RMA in the moment placing on my rig.. only left infineon that time to replace.. |
|
|
Mar 30 2006, 11:47 AM
Return to original view | Post
#8
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(davidletterboyz @ Mar 30 2006, 12:52 AM) What CPU r u using? If lower it's than sempron 3000+, can't change multiplier. down clock also cannot?but HT still can right.. |
|
|
Mar 31 2006, 10:25 AM
Return to original view | Post
#9
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
swgiant
look my sig as a guide... i put 3x HTT |
|
|
Apr 24 2006, 01:04 PM
Return to original view | Post
#10
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
how much u set? 1.55v? watch the temp..
|
| Change to: |  0.0285sec
 0.29
 7 queries
 GZIP Disabled
Time is now: 30th November 2025 - 05:27 AM |
Quote