Yes, is 865pe, the voltage is manage by motherboard, i never adjust it. Do i need to fix it manually?
My 1.5G RAM is 2x512mb + 2x256mb, its ok? and For the FBS:DRAM, wat value should be?

2 stick of the ram is only considered as a good setup for this purpose..
that mean in ur case, only 2x512 or 2x256 is needed.. then only u can choose the right/the best setting..

Hi again...I just wanna ask about the FSB:DRAM ratio. Wat issit actually?
Here's mine, issit a good to have a 1:1 or there is a better ratio?
Need guidance from some pros pls.

1:1 is the best as the cpu fsb n the ram fsb run at the same speed, making the bandwidth better if im not mistaken.

FSB:DRAM ratio means how ur processor and ram fsb cooperate with each other.. its well know as "divider".. so like the pics ur processor now is 141fsb, so with 1:1 divider thats how ur ram is run at 141 also.. let say the ram that u use is PC3200/DDR 400/200mhz which capable tu surpass the processor fsb, u can set it to 5:6(or any as long as ram higher than cpu).. 5:6 for an example, so right now ur procs fsb is 141 and ur ram is 141/5*6 == 169.2..

this is only an example..

Ohh okay, now I get it. Can it be tweak to make it works faster than cpu? Actually, how? Hmm....but I noticed somethin, my ram actually works at 333, but now it works at 266 So this mean the lower it is, slower rite? It was 333 before I tweak the timing from 3-4-4-8 to 2.5-3-3-7. Can tell me wat's wrong? Thx

A newbie learning here

Nothing wrong.. But u need some reading 1st..
Read ikanayam's P4 n memory overclocking guide and here and here and here..
Reading will help u alot.. If this is not enough yet, Google is always been waiting for u..

btw.. wats ur stock ram speed? coz u r using 1:1 but ur ram runs at 141.01(oc'n 8.+)

that means u r using ram wit speed 266ddr

fsb:dram is d ratio of front side bus wit speed pf ram..when u wanna oc higher, u need to use divider/ratio to hit higher speed.. d correct way to nnoe wats ur highesrt speed of ur ram, u can see it at d pinned section of oc united..



tweakin d ram will not effect d speed u r runnin, it will effect if u change d fsb...

This post has been edited by low yat 82: Jan 20 2006, 01:17 AM

I want to suggest something.

Why don't you guys make a proper overclocking database for Intel. The requirement is simple.... just 8 hours prime stable. Post a screenshot with 2 cpu-z showing cpu and ram properties. That's all.

if u guys agree.... antonio can pm me and we'll work things out.

ermm... act wanna ask long time liao.. y got no database for intel.. northwood or wat ever... jus curious.. coz amd d last time also got database...

i think a database for pentium is a must... happy OC'n...

New burn-in processor method.
Overclocked ur proc UNDER defaults voltage..
Results ! P4 630 3Ghz @ 3.825Ghz AT 1.34volts! Defaults 1.4volts!


method:
1)overclock proc at default voltage to max (prime stable)
2)under volts at one notch..prime again..
3)keep under volts until prime95 unstable/error.

ive successfully under volts my P4 630 to 1.34volts.
from 1.4v,1.38,1.37,1.36,1.35 to 1.34volts.
Runs colder & ROCK Stable.

u prime it for how long?

can show us some screenie for the prime test?..

That's mostly true for the 'E' Prescott Cpus. they scale high even on default voltage, 1.3-1.4v if u can keep the temps cool enough.

However, the earlier families "C" , 'B' , etc , will only respond well if additional voltage is applied.

This post has been edited by kucingfight: Jan 21 2006, 03:28 PM

i have some question about my intel rig:
my mobo is Abit AL8-V, the multi is 16 in bios, why it always show only 14 in windows?
i already set to minimal power management... any1 help on this?

d power management shud b set to diasable... btw, plz show some screenies... it will help..

i've fix that...thanks anyway, just set to Home/office desktop...

ermm... i mean at d bios there.. set d power management to disable.. hope u get wat i mean..,.

wta,any1 noe how to use the speedstep for foxconn mobo? im using a p4 1.7 willy proc n 661fx4mr-es mobo.

start overclock yet?
was wondering how high AL8-v can overclock.
tot of getting one..my mobo stuck at 265mhz.