tell us ur ram chip type, cpu

Usually people prefer low clock cpu to oc it so that can get high fsb...

make sure u got water cooling to oc it extremely
set the GAT to AAADD and try again. Set the ram timing to 3448

Hi guyz,im a noob in this section.Can my processor:Pentium 4 HT 2.6c & my motherboard:Abit IS7-E Duo good for overclocking.Help me out here
& u all say my CPU how high i can go le?

but i hear some body say cause i'm using Corsiar value ram.. it limit me to oc.. is there true?

Only the abit mobo has that option...
i tot is 7 has this option in bios?

should have, it is under adcanced chipset  if i am rite..

if dont have, flash bios oso helpless i guess... u should ask the forumer who using the is7 board, iirc kucingfight and shinjite use the same board as urs

Ur giga mobo is a decent overclocker. All u need is to get rid of the Aero4 and get a better HSF. OS based overclocking utility is rubbish. The good ole Bios provides better tweaking manipulation. Probably, ur cpu would do around 2.8ghz-3.2ghz with a high end HSF, also, u need to test and find the sweet spot.
I'm not sure what u mean by 'internal clock', Cpu Speed u mean? The best way to check if it's throttling is to run superPI. There's a stage where u'll get uber slow calculation time.

yeah...i was wondering that myself. I couldn't even get it to go beyond 2.6ghz and he says it can go all the way to 3.2?    is it on air cooling or water cooling?

if it can really hit 3.2, then   

I'm juz qouting the range of overclocking ability. of course,with superb cooling like WC, u can push the chip further

my rig's is my sig there..i heard tat ppl say intel mobo can oc..but i c the genclock support for intel mobo..mean i can oc izit??    noobie here..

i see your voltage was at 1.68v. i dun even dare to go beyond 1.6v (my default was 1.5) 
so u think i should just dump the software OC and meddle with the bios instead?
the problem is i do not know the limit of my chip. if overclocked too much, later become charcoal.

btw, the easytune software from gigabyte also overclocks the PCI, AGP, RAM frequencies as well (do not know 1f it's 1:1 for the ram or not), but i managed to run my RAM from 333 to 400 @ 2.6ghz.

yeah..but hw come i c the website got intel mobo feature inside for the clockgen or the genclock wateva..hehe..means stil i cant use it>?

yup just dump the software if u r really goin into OC, n u should read from start n understand everything, only thing i can tell u for safe OC is: -

BE PATIENT, learn everything from start

hi,im using 630 3.0 processor currently using 915chipet mobo..

any  COOLer to recommend? thinking of buying Artic cooling

which 1 got quite n great performance??
current tempr with stockfan will increase to 55c' from 45' ..sometimes itlll restart automatically.

@kucingfight : congrats man,u now in elite group ady

where can i buy Scythe Ninja ??how much??

yea...i have stopped OC from my M-barton,hehe

Now using 3.0 Em64T not bad la

hi guys, im noob at overclocking, pls help me.

im using P4 2.4 B, 512kb L2 cache.
i heard that this proc max clock speed is 3Ghz izzit true??

last time i was able to overclock my proc from 133 to 166, that is 2988Mhz. it was stable and can complete several benchmark. i was using 512MB apacer DDR RAM running at 2-3-3-7 timing. PCI & AGP frequency locked.

but after i add another 512MB RAM to my system, my PC cant OC even to 145 FSB, dunno why, can someone tell me??

my mobo is ASUS P4P800-X i865PE

my PSU is POWER LOGIC ATRIX 500T, currently using 6800LE (dunno my PC enough power or not, but last time using cheapo PSU & 9600XT able to OC to 2988Mhz)

my RAM is APACER PC3200 (is cheapo RAM, bought at different time but should be same model), but due to my FSB is 133, so is running at PC2700 speed on dual channel.

>>do u think that maybe is my RAM not able to run on dual channel??

i finally dumped my O/C software and dived straight into my bios.

managed to only bump up to 160 b4 windows gave me the finger.

tried 165 @ 1.6v but windows didn't like it.

so now it's at 160 @ 1.6v, which is around 2.73ghz (up from 2.26. ori vcore=1.5v), which isn't much. It makes very little difference from my software OC)

then there's another problem. after i did the oc, i can't access my device manager. neither could i access my network connections (my LAN icon in my taskbar went MIA), but i still have internet connection.

RAM running at 400 (ori=333). AGP & PCI are locked.

also, after i o/c, windows asked me to re-activiate windows (i use ori) coz there was a significant hardware change.    though reactivating it was no problem.

where did i go wrong?