oc is done through your bios... but you need a good psu to get you started...cause chapalang psu will do more damage than good once you start oceing cause of unstable fluctuations in your rails...hehehe....in short kaboom will happen really soon if you OC without a good psu...

thanks .. but i want to try more higher.. have any tips?
current voltage CPU= 1.65v
Ram = max 2.8v
n AGP voltage.. is this for add the GCard voltage??

This post has been edited by Guriseruda: Jan 12 2006, 05:52 PM

I think you could overclock your 1.8A to 2.4GHz or more. I am still having my mom's CPU which is a 1.6A Pentium 4 running at 2.4ghz. They are quite good overclockers but you might need to check the limit of your RAM.

I believe the multiplier is 18x100. Since you have SDRAM133, you could slowly raise the multiplier to 18*133 = 2.394ghz.

heh..es are actually not for sold..it's Engineering Sample processor used by intel engineer..es proc u can change the multiplier without increasing the fsb to oc..mine i get from my brother..he's an engineer at intel.

or occasionally you can get it in garage section...sometimes if you're lucky or when the time is right, people will be selling it...but from my past experience, ES dun work on all motherboards..only specific motherboards...not too sure why....

Can teach me how to o/c it?My PSU is only 350w like chapalang one...
Donno can o/c it or not coz quiet old the pc already...my mobo is biostar u8668 grand,donno u heard it be4 or not.
Can teach me?

i dont know about that..but my last intel desktop board 915gav can...also on my dfi lanparty 915.

This post has been edited by nizamextreme: Jan 12 2006, 06:23 PM

might be lucky i guess...cause the last time people sells ES sample..they say it will work specifically on gigabyte models only...but after seeing the layout of that mobo..got turned off and decided to skip ES samples already...

btw, how is DFI boards on intel? work as good as its AMD mobos?

yups..good...no problems at all.

wats the max vdimm allowed?

Wat to do with BIOS??How to do it?

basically when your pc boots up, they will say something like "press del to enter setup" and by pressing that button, your pc will automatically go to the bios (basic input and output screen) screen from there if your mobo supports Overclocking, a menu should appear..over there, you can tweak your settings to increase your clockspeed...its better to read the overclocking guide located in first page before trying to overclock without knowing anything about it...you can seriously do some harm to your pc if you dun haf any basic knowledge bout it...

Ah,my mobo does not support o/c.Too bad.
Anyway,tq for reply me.

arhh...so how bout MSI
can use ES?
anyone know?

This post has been edited by pires87: Jan 12 2006, 09:23 PM

act.. d ES is illegal.. d proc can b taken from u... it is not sold open market.. but, when u lucky and at d right time.. u can get that kind of proc... but always prepare ur self that d proc will taken from u... if 'they' noe it...

hahaha...yeap if they know...the problem is they are the people who take it out and sell it..hahaha

btw,, still can get any ES proc from ur bro? im interested...

ya, interest also in ES
anyone here got pls offer me
thanks

i try to push more today and i get 3.2Ghz but not yet test it stability.......

I consider myself a noob to oc, only been at it for 3 months. I want to seek advice from the gurus of Intel OC. See my sig below for system details.

Firstly, I have been successful in OCing my Intel 630 stably (Prime95 15hrs) to 3.96Ghz with some heat issues, vcore at 1.55 and vdimm at 2.1. See attached pic. The oc gets me a Super Pi 1M of just over 32secs, and with the 7800GTX, a 3DMark05 score of 8100. After living with this Oc for the past month or so, all systems are go except for the game FEAR..... which will crash and quit to windows, 10seconds after the game loads..... happens everytime. Fear will run stably at 3.74Ghz. What gives? Ram is running at 800Mhz in all instances. So everytime i want to play FEAR, I'd need to bring down the FSB... pain is the axx!

Secondly my system will not take any oc above 3.975Mhz. If I oc anything above FSB1060, e.g. FSB1061, the system will boot but then scale down to 3.975Ghz immediately in windows. I have upped vcore till 1.6v (max for my mobo) and still the same. This happens with all FSB leading up to 1067, after which system will not boot! Which is really odd, mobo issue u think?

Btw, all oc done in the bios, not using Asus' AI Booster.