get xp90c with delta FF 92mm

b4 that, ur CPU is presscott or northwood?

no worry....
because u always control your vdimm.

normally if u oc till the limit with a good ram.
Mobo will die b4 ram and CPU


I partially killed a P4P800 but by 2.8c and BT-D43 still ok.
On AI7 now

This post has been edited by allenultra: Feb 4 2006, 02:31 PM

anybody can help me out?
pls

u need to run sometest to noe wheter ur pc stable or not... try priming it..

bout d temp its normal..this is due to software prob.. jus use it as reference.. d bios one shud b d correct one.. but sometimes d bios 1 also got bugs..

u try first lor do mild oc.. if d psu dun kaboom or dun fluctuates much, then can use for mild oc lor..

if i overclock my intel processor.. do i have to maintain the temp into below 40 degree in order to stable the system?

huhuuhuhh.. u use wat cooling o.. can get that temp... if intel keep it under 60c will b fine... for intel recommend u buy better hsf b4 starts oc... jus my 2 cents..

i'm using thermalright Xp-94.. so it should be fine..

then wait wat leh? already read d pinned thread? if yes, oc ler...

still cannot.. my PSU cannot handle it if i O.C..

hmm... wats psu u r using? chaplang?

enermax 400WATT..

ok wat... y cant allow?

edited: hmm.. after read d best psu for oc'er , i noe wats ur prob liao...

This post has been edited by low yat 82: Feb 5 2006, 11:42 AM

I'm now using P4 2.4c... but somethin weird comeout whn i try to oc it with my new RAM... I install 2 stick of 512MB PC3200 DDR Kingston... Bought it with RM175 each at December... Whn i oc the System bus... seems tht my system cannot boot at all... It seriously jammed on the boot screen... I remember be4 this... I'm using two 256MB DDR400 Kingston also... But those are planted with HYNIX chipset... With my old RAM... i managed to OC it to 2.6Ghz... But... with my new RAM... even i cannot increase the system bus... Whole system jammed down... What actually is going on? (I'm a newbie 'Noob' in oc... ) Thanks...!!!

guys...wanna ask something..is it normal for my hardisk western digital caviar 200gb temp reaching 70c..i just bought it..so curious about the temperature. feels quite hot....

huhhu... y ask here? anwyay its hot!!! btw mayb its sensors prob or watever... touch it to believe it...


try using one ram, see wheter thatd hold u bc or not...

http://valid.x86-secret.com/show_oc?id=69359

mind telling me what's the problem??

This post has been edited by Sim (2): Feb 5 2006, 09:36 PM

u say ur psu autoshutdown ma...


to confirm wheter its ur psu prob, i think u better plug off all hardware such as dvdrom, uv ccfl ...etc... and test it to oc it.. if still autoshutdown..then i think its ur psu prob..or jus plain loose plug?

dunno...

ah... any oher way to test it?? it's kinda difficult for me to unplug all the hardware inside my CPU..

huhuhu..i dunno .. mayb other forummer can help..

since u say it autorestrat, mayb it doesnt supply enough power..so unplug other hardware to reserve more power for d psu to use when u oc..

or mayb ur proc limited u already wit d stock vcore.. try increase d vcore can solve this prob or not...

or mayb random boot was causes by other hardware such as d ram.. try test it using memtest..

hope it help though...