can you post cpuz and other related screeny so that others can help

i see u using nforce mobo,try to add up some voltage for chipset as the nforce 650i is not good in oc fsb of quaddie.

vCore too high, increase NB and SB

I'm getting DFI BI P35, how well this board in oc compare to ABIT IP35-E?

ive tried both
better options on BI for rams

Better OC in BI also?

more or less the same depending on bios
BI has 600fsb capable bios IMO

is it okay with this setting?

or should i alter more?

Try running 5:6 divider(DDR 2 800mhz) your ram can take it and there are less stress on nb

need help...

i have prob OCing my E8200 on my EP35-DS3 mobo
im trying to hit 4Ghz with 500Mhz FSB and a pair of Crucial Ballistix Tracer 800Mhz 4-4-4-12

any sifu can share their overclocking result ?

does all x58 mobos have same DRAM frequencies or different mobos differ in frequencies? also, if i'm using a 1600mhz 8.8.8.24 ram can i go above that frequency?

yes u can run the ram above their rated frequency.

its called overclocking.

by right, u shud look at the proc itself, since the memory controller is in it... i7 natively supports ddr3-1066, any higher is considered overclocking liao

edit: u have to look at the mobo's QVL to see whether your ram is supported or not

This post has been edited by iBenQ: Apr 3 2009, 08:22 AM

OMG,my friend just RMA his i7
built in memory controller rosak
cant run the ram in Tri-SLi mode.

Can post out his spec and what he did ? ( bios Setting if possible ^^")


Current clicking with i7 also @@"

Well, just wanna ask from those pro in overclocking Processor , Graphic card etc.
I did trying to overclocking my processor and Graphic card. but everytime i overclock it, will hang like no tomorrow .
But after i reset it back to normal it goes normal.

May some of the Pros can teach a newbie how to over clocking the Core2Duo E4500 and Forsa 9500GT Graphic card?


This post has been edited by *-a|i3n-*: May 22 2009, 11:13 PM

Hi.
Can help me with overclocking?

C2D E7300@2.66Ghz
Arctic Cooler Freezer 7 Pro
Gigabyte EP43-UD3L
nVidia 9600GT 512MB
1x2GB Kingston PC2-6400
Seagate 80GB IDE

This is cpuz on RAM and proc.



This post has been edited by Raikkonen: Apr 3 2009, 08:31 PM

set your ram and FSB ratio to 1:1 first to find out how high and how stable your rig can handle when OC the processor...for your mobo..check out Dram multiplier and put it to 2.0 first then only play with the FSB and multiplier.

besides...how high you wanna overclock untill..if its just slighly..dont have to touch the voltage..but if you cant make it stable..then have to add...avoid going more than 1.47v with stock cooler..as it gets very hot.


looking at your system..i notice your mobo is P945 chipset ler..IMO not really enough to handle the core2duo OCed....better change mobo first if you really wanna start.....get P35 if youre tight on budget

oic...actually i still got another set of pc...also same spec just the mobo is p35-ds3l

This post has been edited by *-a|i3n-*: Apr 3 2009, 10:26 PM

here is my oc e4500. 3Ghz.
333x9 1.37.

This post has been edited by bobiac: Apr 3 2009, 11:18 PM