1- already done rooting via superoneclick
2- already patch to unsigned bootloader

now i am waiting my microsd to arrive so that i can convert to ext4+cwm.

anyway to use nandroid backup before converting to ext4?

How do you all buy your SGT normally? Through Telco's plan or buy retail?

Any recommended seller or shop? Thanks~

This post has been edited by th3_UnFoRs33n: Feb 24 2011, 06:47 PM

Yes, some users reported this problem. Seems you can control this by changing the voltage - I don't know how to do this. Anyone can advise ??

For me it is a case of very slow charging. Anyway I have taken off this OC kernel as really uncomfortable seeing the battery temperature hovering at 35 to 40 while in use when I am so used to 28 to 35 max

Buying iclip 308 bluetooth headset..paired and connected succses.
But i cannot listen music via this headset. I can answer call only. Any setting problem?

***Try with my Nokia N73 don't hav any prob.

Since rooted, just use Titanium Backup. Nandroid backup only if :

1. Change rom to , say JMI , flash Chainfire CFRoot recovery - you now have recovery installed - can do nandroid and restore . Restore back apps/data from TB
Personally I do not like restore from TB as someties it creates some instability and force closures. When I flash new rom. I prefer to reinstall apps back manually and only use TB to restore back some data eg mail accounts, SMS.
With this method you now create another working rom with all your data which is very good

2. Change kernel to R3 and convert to EXT4 : Your data intact and recovery installed
Flash any EXT4 rom, eg Overcome or Modaco R! - you lose all your data

So you figure out yourself what you wish to do and to what lengths you wish to change

try to access the recovery mode,

only saw the samsung recovery 3e thingys.

4 options available only:
-reboot
-update zip
-wipe data
-wipe cache

@@ guess i need to get the Chainfire CMW to do nandroid backup first before converting to ext4.

there is an option for it, hold down n the option will pop up

i already tick both option...still failed

i cant figure out the problems, but u can try richardtrip's v12... its confirmed working if u have the battery n charging problem..

I use overcome V1.1.3 plus 1.4ghz oc v15.. undervolted like this:
1400Mhz: 1450 - 100 = 1350mV
1200: - 100
1000: - 150
800: - 150
600: - 100
400: - 100
200: no changes
100: no changes

Battery temperature while idle 30deg celc.. on charging 40 deg celc..
battery life is very good.. just a bit, around 5% faster drainage comparing to modaco ext kernel..
Plus oc kernel have voodoo sound FTW..
quadrant score 2100..

This post has been edited by wiebie26: Feb 24 2011, 07:52 PM

How to chsnge this voltage figures

Hi Benny,

Thank you for this thread. This is what i'm looking for at moment

Please add me though.
izwan.rasip/DiGi Malaysia/P1000DXJJ22/FROYO.DXJK2

go to voltage control... they have the app avail in the forums as well...the zip kernel included the apk in it

once u flashed the oc kernel v15 there should be an app called voltage control installed in your tab.. alternatively just go here and download the apk:
http://forum.xda-developers.com/showthread.php?t=924654
thats richardtrip's thread.. at post #1 he mentioned :
Some info about the undervolt control:

- full UV user control via sysfs
- works on all governor
- echo "50 50 150 75 75 100" >/sys/devices/system/cpu/cpu0/cpufreq/UV_mV_table
- column 1 for 1.4ghz, 2 for 1.2ghz, 3 for 1000mhz, 4 for 800mhz, 5 for 400mhz, 6 for 200mhz and lastly 100mhz
-values are mV
- Use xan's app if you don't like to work in terminal/adb here "just pres the here button there to doanload the apk..

Thanks guys for the voltage tip. Didn't notice this option

I'm done adjusting the voltage but still failed to charged the device....

---

Added on February 24, 2011, 8:40 pmAnd the battery temperature is at 70deg (I've been using several apps to confirmed this).

This post has been edited by sphiroth: Feb 24 2011, 08:40 PM

hmm.. temp sensor not working i suppose.. go to tichardtrips thread in xda to downloa v12 if you cant go with v15..
what rom u using?

I'm using modaco, maybe thats why got problem.

---

Added on February 24, 2011, 8:56 pmWhere to get the old version?

This post has been edited by sphiroth: Feb 24 2011, 08:56 PM

http://forum.xda-developers.com/showthread.php?t=924654
it's not old version sorry.. download v15 with patched temp.. try to go with that..

if stil not working then u should try again from beginning.. read the oc kernel thread.. many users have diffrent problems..

This post has been edited by wiebie26: Feb 24 2011, 09:04 PM

Already tried it, same thing happen. Seems like it cannot correctly reads the temperature (79deg celcius should be melting plastic already....).

---

Added on February 24, 2011, 9:05 pmGive up already (for today). Reflashed back to modaco without the OC kernel.

This post has been edited by sphiroth: Feb 24 2011, 09:05 PM