haha alright. Anyway I have been wanting to ask this for a while already.

Most of us treat our tabs as treasures I believe? Anybody actually dropped it from a height of more than 1 meter? I've been trying to find video's on the stress test of galaxy tab but somehow its always about the gorilla glass only.

Are you still on Richardtrip 1.4 Ghz OC kernel ?

I have taken it down and reflash back the Modaco R3 kernel. I just wanted to test out how much improvement it will gave me. The improvement was there but I was uncomfortable with the higher battery temperature ( on average 5 to sometimes 10 degree Centigrade ) higher. So I reset it back to max 1 Ghz using setcpu but than I noted following:

- battery temperature was still higher though reduced by average 5 degree centigrade - I could accept
- live ac direct charging was very slow - I noted about 15 % in an hour  ; before I upgraded the kernel it took only about max 4 hours to fully charge from near empty

Ouch the pain of cracking glass and rm650 to replace. How long you have to wait to get it back. If it is of any consolation the replacement cost is reasonable as htc 4.3 inch eg hd2 it cost rm800 to replace
what app do you use to monitor voltage and chsnge it ?

  How did you crack it?

@ Benny : Yes, still on richard trip's V13. And yes, battery is hot. Been playing with UV app.Think at -100 mv for all except 1ghz and 800mhz at -125mv does achieve lower temperatures. Idle @ 29deg and peaking at 39deg when charging. It's at least two deg. more if set at -75mv throughout. I don't use setcpu on demand and schedules --it's very complicated as it is. As for battery life, seems ok although we expect less battery time from a single charge.
All this is probably much ado over nothing while we wait for honeycomb.

I'm using Miren browser now.Think it's great for moving back and forth pages and for moving to the top bar.

@ Myser : Yes, all sensors working with v13. Notice you're on koxudaxi's kernel --which version? Which things don't work? Tempted to try but this is one confused geek --can't even get his version numbers right.

rgds, dave

Just got myself a Used but very new Galaxy Tab.  Having fun with it.  It is a nice device that goes with my Digi broadband data plan.  Not really brilliant for a phone replacement but with only data, this is superb.

What would be the best app to check the bandwidth for Broadband usage?  I downloaded Network Monitor but it does not seems to be working.

Thank for the headsup. Downloading now as I am writing this

Guys - if you wish can try to change your bootup image. I have tested and works on my Tab. refer to this link - just follow the instructions - straightforward and simple. There are 3 ways. Easiest use root explorer

http://forum.xda-developers.com/showthread.php?t=905538

Example 2 of them : click on image to see animation

[attachmentid=2058002][attachmentid=2058006]

cx5/orangKL@HK/ZHJJ1/ZHJK1 kernel by xda_koxudaxi_1.4Ghz then to xda_rotohammer_JMIv2 lost 1.4Ghz,

then re-kernel_koxudaxi boot-loop
then kernel_xda_richardtrip boot-loop
reboot into recovery-mode shows EXT4 CHECK intact
-select install from zip by Overcome1.1.3.zip
--Finding update package
--E:failed to mount /sdcard(Invalid argument)
--E:can't mount /sdcard/update.zip
--Installation aborted
-select WIPE
--Formating /data.. /cache.. /datadata. /se-ext.. /sdcard/.android.secure
--E:failed to mount /sdcard(Invalid argument)
--E:can't mount /sdcard/update.zip
--Skipping formating
--Data wipe complete
Reboot 1 OK hang
Reboot 2 OK OK hang
Reboot 3 OK OK OK hang
Reboot 4 OK OK OK OK hang
give up
Reflash kernel by koxudaxi hktw_2_3 reboot OK
-sdcard can't mount within adroid. empty empty, not even the usual data folder
apk Temp+CPU V2 shows 1GHz only
apk CPU Tuner shows 1GHz only

still looking for other solutions ..............
-

LOL your problem has gone global. Just flash modaco kernel using odin.Then you can update to overcome with cwm.then trip v15.

You tried to switch from koxudaxi's kernel to trip's v15 straight away.You should wipe all caches, flash the modao kernel to properly set up cwm (if you have read thru koxudaci's thread you would have figured he has a problem with cwm) then use cwm to update to trip's v15 kernel.

Here is my own experince but not sure how true of this:
When flash ROM or Kernel with CWM, try unplug USB of TAB from computer.
If not, you might facing chance of failure.
However, pls ensure your TAB reserve at least 50% battery while flashing to avoid breaking your TAB.

any prob using modaco r3 + ext4? wifi, gps or camera issue? i am still reading and compare all mod ROM, don't know who hav stable ROM...

Buying iclip 308 bluetooth headset..paired and connected succses.
But i cannot listen music via this headset. I can answer call only. Any setting problem?

***Try with my Nokia N73 don't hav any prob.

Yes, some users reported this problem. Seems you can control this by changing the voltage - I don't know how to do this. Anyone can advise ??

For me it is a case of very slow charging. Anyway I have taken off this OC kernel as really uncomfortable seeing the battery temperature hovering at 35 to 40 while in use when I am so used to 28 to 35 max

How to chsnge this voltage figures

Thanks. I'm a little worried to oc since the temperature is 70 deg C (doesn't really know whether its the sensor problem or not).

maybe you should try overcome 1.1.3 ext4?

This is before OC.
[attachmentid=2061422]