if im oc my i7-2600k to 4.5ghz,it come out blue screen,error 0x00000124,is it problem since im no oc my ram (hyper x 1333)?

Increase Vcore.

hi, any huge different after wear on ur dual blade master? Im using hyper 212 plus too with single blade master

1.355vcore fail at loop 97 , 1.360vcore fail at loop 129, which means i need more vcore right? if yes this processor really power hungry.

i only set multiplier , vcore , and disable all processor power saving feature in bios, other option all left auto, which few option i need to look out?

thank you.

Intel Core i7 2600K @ 5.35 GHz = 105 X 51
Gigabyte P67A-UD7 B3 F3C
2x2GB G.Skill RipjawsX 2133C7 @ 2240Mhz 7-10-7-27-1T
2x MSI GTX580 SLI, 930/4100Mhz
Corsair AX1200

** cpu-z reads vcore wrongly.

Bro owikh need ur help,is this normal........Link

pump vcore 1.375 at bios
loop 255 fail.
need more vcore? or some other option i need to set? please guide me.

This post has been edited by nncl: Mar 27 2011, 10:59 AM

never try single blade

raise in vcore does not help in stable, i think not vcore set wrongly, what setting i need to change?

@nncl failing at 225th loop is pretty impressive. alot of ppl here would just stop at 100th or even 20th and declare stable. I doubt all of them are as 'stable' as yours for that clockspeed lol

woot LinX 2 hours+. notice that's 32-bit.
cant really compare to our 64-bit runs which loaded all the memory capacity and took longer time between 2 runs.
means faster to see errors with 64-bit than the other.
hmm hard to say in ur sad case, could be mem timing issues.
tFAW=30 is my trick for prime >3 hours
notice that tRFC on UD7 is tighter than MIVE at auto default. MIVE always stay at 118-124 whilst UD7 at 74 for 2133 and 88 at 2200+.
I could prime for 3 hours+ on UD7 but hardly pass an hour on MIVE.

PS: if possible next time pls show another CPU-Z tabs as well

@metsatsu, yeah , that why i aim for 500 loop pass in linx.

@ owikh84 , thx for help, bro. already set the setting you mentioned above, now running.

i think you mean you easily pass 3 hours + on MIVE rather than UD7 right? cause you mention UD7 timing more tight?

This post has been edited by nncl: Mar 27 2011, 02:21 PM

Newbie here. What is MIVE?

short form of asus maximus IV extreme

i was right no typo there just that still couldnt pass 1 hour with MIVE.

wow by ure own definition
a 500run stable 900mb used and its more stable than him

LOL
whats with ppl and not running 3500mb since thats the max u can do roughly on windows 7
and 5500mb for 6gb kits.

again dunno where the crap about m4e having looser timings came about other than noobies doing a auto clockin on m4e
set ure own timings dude the board was meant for that.

looking at the bandwidth ud7 sux as usual on auto clocking.

do u guys actually learn how to calculate tfaw
or just whacking and guessing

most of the ram timings are fixed calculations

learn more on dram clockin ppl. dont do the noobie way

This post has been edited by cstkl1: Mar 27 2011, 05:55 PM

G.Skill RipjawsX 2133C8 @ 2220MHz 8-10-7-27-1T, 1.68v - cant do 7-10-7-27-1T

2250 7-9-6 1.7v possible to pass 32m?

This post has been edited by coolice: Mar 27 2011, 08:53 PM

not possible, 2220 8-9-8 1.7v+ also failed.
2133 7-9-6 1.68v is okay

found out is the VCCIO problem.

This post has been edited by nncl: Mar 28 2011, 10:32 AM