Ya, the temp is a bit high, so i roll back to my previous solid hard rock 4.6ghz, only max 74c while running 50x linx. And i found my 4.8ghz is not stable yet, even i ran 50x linx and 1hour prime95, after that i just open winamp listen music and viewing picture in my folder den blue screen.

U knw TMPIN0 temp is from which system component? It hits 79c lol.

is oc ram related to oc cpu?

Hi, just success oc my 2500k @ 4.6ghz with hyper 212+ dual blade master.
is that ok for 24/7 run?

Look fine for 24/7, the load temp is lower if not running stress tests.

wat do uguys think is a better choice?

msi p67a-gd55 vs asrock p67 extreme4

(using for i5 2500k and max oc will be 4.0ghz

after that stress, i do some chatting and browsing, then i run 3Dmark vantage, after 3dmark, bsod.... is that psu problem? cos im using old enermax fma2 465W, and runing 5750. plan to save money get 850W or 1kW
bios setting vcore 1.4v, PLL 1.85v, other auto.
msi have the 1 button oc, im using gd65 with 2500k, 1 click i get 4.2ghz 

what's the code of the BSOD? pls refer to Post #1 for details.
If it's one of the listed then should be a bad OC especially the auto settings as these will changed randomly on every reboot. 
bad PSU is possible for sure higher wattage offers better OC etc..

0x124 - but my bios dont have VTT/QPI... left  I/O and SA voltage to play around..

If u read again my post, 124 is related to insufficient vcore.
I saw u ran linX in diagnosis mode, may be in normal windows environment u need extra vcore.
one of the reason why i dun wana use diag mode. now linX again in normal mode 

finally get 4.5ghz on stable voltage setting, tested 3Dmark, din get BSOD anymore, much more stable then 4.6ghz.. and i din use auto, i set to all default voltage.

thanks

hi there, i'm new sandy bridge user n i noob about oc .....wanna ask if i can oc i3 2100?? i do some research n some say can but cannot go more than 3.8  , ....donno...please any "sifu" can help me??   

If not mistaken, 2100 is locked and does not support turbo and therefore you can only oc via BCLK, which means about 5% OC. Let others confirm this.

BCLK = Baseclock??