what so exciting about 108.3 bclk when coolaler already clock at 110.74 bclk



source

guys, wanna ask something here about the memory pairing with sandy bridge cpu before i buy sandy bridge. because now still not many ram special made for sandy on sale ( except ripjaws x series, but hard to get in malaysia). so my question is will there any chance a kingston 2133c9 , dominator gt 2133c9 or dominator gt 2000c8 and clock the speed at 2200 cl7 something like the ripjaws x speed? cause i know the sandy bridge memory controller is stronger right?

This post has been edited by nncl: Jan 20 2011, 08:13 PM

just back home and saw these on table





originally want to get ripjawsx from owikh84, but noticed that his set is green pcb, then i decided to try my luck to hunt a set black pcb ram.

will upload some result after 15 march.
now still thinking between p8p67 deluxe and p67a-gd80 which one to buy, need some suggestion from you guys. thank you.

This post has been edited by nncl: Mar 1 2011, 08:44 PM

bro owikh, based on your playing, which perform better on sandy bridge platform? 2133 c8 with so call bbse chip inside or 2200 c7 with psc chip inside?

1.355vcore fail at loop 97 , 1.360vcore fail at loop 129, which means i need more vcore right? if yes this processor really power hungry.

i only set multiplier , vcore , and disable all processor power saving feature in bios, other option all left auto, which few option i need to look out?

thank you.

pump vcore 1.375 at bios
loop 255 fail.
need more vcore? or some other option i need to set? please guide me.

This post has been edited by nncl: Mar 27 2011, 10:59 AM

raise in vcore does not help in stable, i think not vcore set wrongly, what setting i need to change?

@metsatsu, yeah , that why i aim for 500 loop pass in linx.

@ owikh84 , thx for help, bro. already set the setting you mentioned above, now running.

i think you mean you easily pass 3 hours + on MIVE rather than UD7 right? cause you mention UD7 timing more tight?

This post has been edited by nncl: Mar 27 2011, 02:21 PM

short form of asus maximus IV extreme

found out is the VCCIO problem.

This post has been edited by nncl: Mar 28 2011, 10:32 AM

wa? then what problem with my h70? 8xc when linx at 4.5ghz

2500K , core temp to measure temp, dont know it accurate or not cause the frequency also wrong one.

well, i guess my luck not that good, cause this chip need 1.385v to stable 4.5ghz.

---

Added on March 29, 2011, 8:12 pmscreen shoot on page 35, now still finding stable spot on ram tuning.

This post has been edited by nncl: Mar 29 2011, 08:12 PM

v1.385 stable at 4.5ghz is use LLC level ultra high

---

Added on March 29, 2011, 8:24 pmif reduce vcore cant even pass pi32m

This post has been edited by nncl: Mar 29 2011, 08:24 PM

perhaps my arctic silver 5 still in "run in" condition ba? after 200 hours will drop few c?

haiya, that time i bought f12 with you didnt notice you sell mx-4 also , else surely grab it together

after 3 day of playing with my new pc I kinda big head now.

4.5ghz ram 2133 7-10-70-27-1T
windows 7 32 bit OS
pi32m not passed , require more vdimm (1.665)
linx not pass 5x loop, require more vdimm.

windows 7 64bit OS same setting
pi 32m passed, require only 1.65 vdimm.
linx passed 100 loop.

been told by 64bit OS more stress. now kinda confused .

---

Added on March 30, 2011, 7:49 pmnoticed linx GFlops increase from 102 to 124 when switch to 64bit os.
also
when pi32m the core temperature maximum 60c and balance core temperature (like 60c 60c 60c 60c)
but when linx the core temperature maximum 82c and imbalance core temperature (like 74c 82c 82c 80c)

This post has been edited by nncl: Mar 30 2011, 07:49 PM

working on that , thanks for advise , boss

---

Added on March 30, 2011, 11:13 pm64 bit OS, linx fail at loop 129 , don't tell me your pc over 100 loop is stable. lol




This post has been edited by nncl: Mar 30 2011, 11:13 PM

ya, lesson learned from last time, only run 100 loop then declare stable, but when gaming, some times will BSOD.

finally completed the task.
right now running 4.5ghz 1.355vcore 1.66vdim because of running at 1T.


searching lower vdimm now.

---

Added on March 31, 2011, 2:33 pmupdate~

1.655vdimm . linx error at 6.xx hours # 389loop

i think the statment that " passed 100loop = stable " really can't use as reference.

This post has been edited by nncl: Mar 31 2011, 02:33 PM

blue slot is first and third slot?

asus also suggest user put their memory in A2 and B2 slot which is 2th and 4th slot in the manual.