hi, i got sumthing to ask, i got my intel i5 2500k oc to 4.7ghz with vcore 1.335. When i wan to go further n adjust 1.335>1.350, my pc fail to boot, after POST i got a black screen with underscore on top left screen. 1mo is i seen u guys oc with gaming ram, is it related to oc cpu? My ram is kvr 4gb ddr3 1333mhz, i leave it at stock speed currently.

any risk enable it? what mean spike the voltage?

yeah it works now ^^, now testing 4.8ghz with 1.350 vcore.


Why my bus speed is at 99.8mhz? is there anyway to running it at 100mhz? sry asking so many common here

This post has been edited by FiragaZ: Mar 20 2011, 04:16 PM

Finally i got my intel core i5 2500k oc to 4.8ghz with 1.360 vcore , but highest temp i got was 84c while running linx, idle temp around 45, how do u guys think? My cooler is cm hyper 212+.

Ya, the temp is a bit high, so i roll back to my previous solid hard rock 4.6ghz, only max 74c while running 50x linx. And i found my 4.8ghz is not stable yet, even i ran 50x linx and 1hour prime95, after that i just open winamp listen music and viewing picture in my folder den blue screen.

U knw TMPIN0 temp is from which system component? It hits 79c lol.

This post has been edited by FiragaZ: Mar 21 2011, 03:23 PM

is oc ram related to oc cpu?

nice temp u got there, we got the same cpu and mobo

hi, any huge different after wear on ur dual blade master? Im using hyper 212 plus too with single blade master

How come ur gflop so high 120+? mine only 50+

This post has been edited by FiragaZ: Apr 6 2011, 12:06 PM

Tested the latest linx, result 70+ (non oc), will try oc later.

nice temp u got there, what cooler u r using?

Finally i got 95+ GFlops with oc. Higher oc = higher GFlops? acther 5.0GHz got 100+.

So mean 8 thread i7 2600k will get more GFlops? My i5 2500k 4 thread with 90+ GFlops is acceptable right?

Here u go

Rreupload , this is without resize, u can look in 1920x1080.

Downclocked to 4.5GHz due to high room temp

---

Added on April 8, 2011, 8:48 pmis it latest LinX much stressful? It feels like after trying latest Linx i only got such high temp.

---

Added on April 8, 2011, 9:07 pm

I test back the previous 0.6.4 linx, i found the previous version takes longer time to complete each task, latest version takes 50sec high GFlops, previous takes 110sec low GFlops, its means latest version is really much stressful, it squeeze every juice of my cpu to work, tats why more heats is created.

This post has been edited by FiragaZ: Apr 8 2011, 09:07 PM

My ram currently at default.

u get 120+ GFlops because of performance ram?

what mean CPU throttling?

do u enable internal pll voltage? try disable can try again, mine last time enable 4.5GHz need 1.35v, but after disable i can run it at 1.325v.