i think i want to change better water cooler 1st...
scare to oc using H5O...

check my siggy(SPEC).sometimes when i on nothing come out.then need to shutdown re on again then everything ok bt it will show overclocking fail.izzit my proc or mobo.my mobo is nt B3 revision yet.lazy send to claim
test prime more then 1 hour temp max also 74-76.

Asus new BIOS:

P8P67-DELUXE
ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155...E-ASUS-1502.zip
P8P67-EVO
ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155...O-ASUS-1502.zip
P8P67-PRO
ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155...O-ASUS-1502.zip
P8P67
ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155...7-ASUS-1401.zip

This post has been edited by stasio: Mar 18 2011, 06:55 PM

1502 version even newer then ASUS GLOBAL thats until only using 1305 version.....

---

Added on March 18, 2011, 8:51 pmthanks stasio!!u the men

This post has been edited by Dandy: Mar 18 2011, 08:51 PM

[ 1502 ]
----------------------
1. fix the CPU/turbo ratio is wrong after clear CMOS
2. fix mouse cursor may be drift if there is a joystick plug in
3. fix that xhci legacy support function fail if there is another PCIE usb3.0 addon card on the system
4. Improve TPU's algorithm to bring better performance on some CPUs.

owikh84,
seems you get your UD7-B3 (XS).

yaya, got my UD7 B3 yesterday. Thanks to lingloong and NationTech hehe.. Below are the drillz ...


P/S: got problem with PCIEx16_1, after installing GTX580 driver (260.99 to 270.32) and reboot into BSOD.
now switched to PCIEx8_1 problem solved but what a waste if not using X16.
ok put my D2X on the said PCIEx16_1, working fine I think ive fixed it.
lol the POWER button on the top right is still up side down, why Giga didnt fix it?

This post has been edited by owikh84: Mar 19 2011, 11:56 PM

Nice see seller already have asrock mobo. This board are cheap and overclock well. Come guys, grab it fast!

hi, i got sumthing to ask, i got my intel i5 2500k oc to 4.7ghz with vcore 1.335. When i wan to go further n adjust 1.335>1.350, my pc fail to boot, after POST i got a black screen with underscore on top left screen. 1mo is i seen u guys oc with gaming ram, is it related to oc cpu? My ram is kvr 4gb ddr3 1333mhz, i leave it at stock speed currently.

in bios enable CPU PLL overvoltage. it will spike the voltage to boot into windows.

any risk enable it? what mean spike the voltage?

the only effect is it will let u run higher speed.
risk is blow up

yeah it works now ^^, now testing 4.8ghz with 1.350 vcore.


Why my bus speed is at 99.8mhz? is there anyway to running it at 100mhz? sry asking so many common here

This post has been edited by FiragaZ: Mar 20 2011, 04:16 PM

It is normal that some brands ie Giga MSI dont run 100MHz exactly. Asus does 100MHz.
To get 100MHz, u might set BCLK in bios to 100.2MHz.
no risk in advanced...

i set my mobo setting to auto also got issue!!!!non oc!!!!.wah lao!!!!mobo problem meh...update to newest bios d.....need go claim for B3

shud i change to SB b4 its too late..reali interested here -)

wait for Z68 chipset ba.or bulldozer^^

Finally i got my intel core i5 2500k oc to 4.8ghz with 1.360 vcore , but highest temp i got was 84c while running linx, idle temp around 45, how do u guys think? My cooler is cm hyper 212+.

Nice, but not a good proc. Temp is that high due to hot weather in msia.
ur vcore during load is actually 1.41v.

Ya, the temp is a bit high, so i roll back to my previous solid hard rock 4.6ghz, only max 74c while running 50x linx. And i found my 4.8ghz is not stable yet, even i ran 50x linx and 1hour prime95, after that i just open winamp listen music and viewing picture in my folder den blue screen.

U knw TMPIN0 temp is from which system component? It hits 79c lol.

This post has been edited by FiragaZ: Mar 21 2011, 03:23 PM