dafreak..
want to ask about the SS u posted on MSI 1m challenge..
why u unlock ur proc, then lock back 2cores?

is it will give u a better clock or what if unlock?

since when im with sempron , unlock will give a significant boost in ram oc..

bsod, fail to boot into windows at that clock with 4cores

so i just lock the other two and try and can boot into windows

not sure whether got any difference if proc is locked back

OT: anyone know why wprime2.04 take so long to scan hardware?

This post has been edited by dafreak: Dec 19 2010, 03:19 PM

Just tried 1705mhz on my eco, need so much voltage just for 50mhz increment, previously was 1.55, now 1.65
not the optimal setting


This post has been edited by 1024kbps: Dec 19 2010, 03:25 PM

I have d same problem. wprime 2.04 scan hardware takes too long until I skip it. then I try 1.55 version very fast o. 2.04 keep scanning like never end 1

both version are broken one lol,
just make sure you set the "thread count" to 6 if you are using 6 core cpu,
1.55 version cant even detect my system properly, default thread count only 1.

I know tat d default thread is set at 1. so need to set it at 6.
I thought wprime is good to do short stressing. hope they fix it d 2.04version. really save my time compare to prime95.

wPrime and IBT dont really "hit the nerves" on AMD cpu, as someone said on xsforum.
even if you can pass the IBT and wprime 1024m stress test doesnt mean your pc is fully stable.
prime95 blend and ycruncher continuously stresst test is the way to go imho.

no.. i mean..why u unlock to x4B55 and lock back x2 b55
why just dont disable the core unlocker.. make it 555. u get what i mean?

i think 4 on defualt..no?
wprime is not stress tool.. is benchmarking..for stress tool, longer is better..thats the rule so far.

u tried another 2sticks that u just bought?
not all eco perform the same.. so my guess, both kit not using the same ramchip..

and also for me there is no "optimal voltage" since i dont clock for daily usage.. esp ram.

This post has been edited by kuntawakaw: Dec 19 2010, 05:31 PM

changing the ACC firmware thing requires extra 1 reboot, so i just disable the other two cores

Nope, its the same 4 sticks that can do 1600mhz CAS5 @ 1.55v
well i duno why it need so much voltage and loosen so much timing just to reach 1705mhz
need time to do experiment though.

2000mhz CAS 9 prolly need 1.7v above just like anyone else

1.55 version default thread count is at 1.
Yea. I do realize stressing d CPU longer is better so tat we can determine whether is it safe to operate in d long term.

if im not mistaken u need to launch cpu-z 1st before runnin wprime, with that u dun even need to set d thread count iirc.

trusted tahap gaban seller! hahahaha... (ninja3 cun woooo)

4ghz dont utilize all core for daily usage unless u do a multimedia task... huhuhu

Wei udah udah, u org baru kawen mau jadik assistant promoter ka?

IMO even doing multimedia task doesn't really tax the cpu kaw kaw, coz usually the thread will jump from one core to another..
To me only prime, orthos & OCCt usually will work ur cpu kaw kaw..

switching between task require cpu power alot..
especially like me switching between game.. browsing, downloading blah².. really need everything fast..

guys with thuban proc would like to know when u guys oced ur proc do u guys enable CnQ for 24/7 use

Yes we do turn CnQ on, only when benching CnQ off

---

Added on December 20, 2010, 12:02 pmThen lai lai cheap s3x Cor3s la bro

This post has been edited by cloudwan: Dec 20 2010, 12:02 PM

tq bro otromen ...

i tried before running 4 games at the same time switching with no prob (battlefield 2, modern warfare 2, dirt2 and dota) thats is real multi tasking lol

Hahahaha for i believe with 3d games its more taxing on the GPU if u do that, memory maybe up 2/3 & cpu by 1/2