Phenom II 925 | 3.0Ghz | herojack41 | MSI 770-C45 | Kingston Value DDR2 800MHZ | 860 | Default | CoolerMaster TX-3

add mi

hei guys.....
i guess no one rmb me anyway...
btw i have a problem now...
few days be4 i was able to overclock n play games....
till just now, i've got a new HDD, plug it in and run....
but all i got is BSOD be4 windows....
then i've tested the rams and found out 1 had caused it...
so unplug it is the normal action we take...
but problem doesn't ends there...
thn i tried booting up and it works...
after 1 or more reboot, the system just couldn't get through BIOS...
From the mobo LEDs, the LED meant "memory problem"...
that only ram running in the mobo a minute ago just got back from RMA a few months ago...
any idea what's the culprit?
or any ocer in Cyberjaya willing to test out my rams?

Is anyone know why my vcore dropping whe I'm stressing it while in idle its showing the right voltage? eg in bios I've put it 1.35v but on load it showing 1.28v.

hi cloudwan...
mayb i'll try find some rams to test on my rig or test my ram at other's rig...
hopefully it's not some difficult case which i had to replace both... T.T

---

Added on October 17, 2010, 11:09 amif both the rams not in place of the slots,
wil the bios screen be shown?
no rite?

no la... my cpu is stock after reboot cz my cmos batt is dead...
will that be the problem?

---

Added on October 17, 2010, 1:17 pmah well nvm..
playing game v it now d... XD 

ops... it crashed...
games graphic crash or it just hangs then BSOD...
Ram problem rite?

Cannot must have proof

Yeah, I play with LCC and set it at 25% it seems to show and stay around the vcore i've set it for.

dont want lah...
the thing that i can do is RMA it..kekeke..  (or perhaps stare and amazed by the nais heatsink)
err.. worry not bro..
amd is not like intel..
for amd, 1.8v is normal.. very2 safe (Atleast for me)
but since most these days ram not react to volt well, that is why ppl make em <1.7v

and i removed some of the insulation near ram pwm + some cooling.. so i can assure u the board will survive all the way back to u   

normal mobo oni that confirm can run x16.. the gc need rma i guess.. last time i thought the mobo is the culprit.. after changing mobo oso the same.. haihz

Its time to change ur GC sarah~

wait... dun tell me bro sarah owns a hydra based mobo? 

today should be d day of darkness to arrive... (not be chip [email kate dah shipped but chip still not here, today kot???] but d imminent departure of Roo from UTD)... 

looks fine to me bro, it's not a prime session so should be doable w/ d mentioned volt.  :/nod:
it's a 1021EPMW batch 1090t bro. dun expect much, i'll be dead happy if i can run it 4.1+GHz prime stable. d imc freq oc is really a PITA, of all 3 thuban i've tested, all havin problem prime stable @ 3k. user problem or mobo (hintin bro cloudwan for 1-to-1 swap w his CHIV  :/hehe: )  :/hmm:

gitu kah?? if like that come exchange 1-to-1 ya "normal" mobo w my fren's evo mobo. evo > "normal", so u untung...  :/lol:

erm... again, dun put high hope on me, if luck is always w me i strike toto long time ledi... some more, i always have more luck on ram, not chips...    but rest assured, i'll try my best b4 offloadin it...  ;/)

tuka ngan mobo "merah & itam" u tu mau???  :/drool:  :/hehe:

CPU model | Phenom II X3 720 (Batch number 0906EPMW)
OC Speed | 3.5GHz
Mobo model | Asrock 870 Extreme 3
Nick | lat_lonelyboyz
Ram | 2x2GB DDR3 1333 Team Elite
Timing | 7-7-20
Cooler | CM Hyper N520

really? ok2 sorry2

Processor Model Phenom II X3 720 (Batch number 0906EPMW) | Overclocked Speed 3.5GHz | LYN Nick lat_lonelyboyz | Mobo Model Asrock 870 Extreme 3 | Ram Type Team Elite DDR3 | Ram Speed 1333 | Ram Timing 7-7-20 | Cooler Model CM Hyper N520 |

urgh..
somehow i found bright side of this board.

[attachmentid=1845844]
1.503vimc as set in bios..

itu otomen atuk sudah.. muahaha

the ram 1.6v or 1.5v?

Morning and mari pergi kilija~

Tonight will get s3x core for testing...

haha can't request more if the ram reach the 1k barrier..
still 1.53v.. interesting..
want like ah_khoo setup la..

eh.. our beloved dura-ace use OCZ gold iinm last time to beat us all..kekekek.. but for me it just a normal value ram in disguise..

given d volt he used back then, i suppose they're d9... 

finally managed to break d 7 points barrier... yey!!! 

[attachmentid=1859064]

All so ganas, mine 3.91-3.94 only

PS: Finally got a Gainward 1GB 4870 Golden Sample for the lulz at a cheap used price

last time yes... nowadays cheap. only rm20+- from value rams..
last time the vdimm is around 1.9v
now 1.65 iinm.. so no d9 anymore..keke

Yeah but OC scalability fail.....~_~
So fast got artifacts at a little bit higher clockspeed than the turbo mode