-deleted-

This post has been edited by nestleomega: Jun 16 2010, 05:29 PM

Here is what i did yesterday during sleep:

During sleep,do another 20loops IBT to test the performance of my loop since weather is nice yesterday :



Attached thumbnail(s)

bumping this old thread so people can continue asking questions here

I need some help OCing my new 5400.

Motherboard : EP35-DS3
RAM : Kingston DDR2 800Mhz RAM ( 2 sticks)

Here's what i set:
RAM speed: 800Mhz
Multiplier= 10
FSB=333
FSB voltage: +0.1v (from default, only 3 settings: +0.1v,+0.2v,+0.3v)
MCH voltage: +0.1v (from default, only 3 settings: +0.1v,+0.2v,+0.3v)

CPU speed=3.33Ghz

It wasn't stable by default voltage (1.28xx), so i up it to 1.36xx and managed to run the 3D Mark 06 CPU benchmark (previously with lesser voltage it crashed). I assume 1.36xxv is still safe as the specs says the voltage between 0.8v - 1.36v??


Is this voltage good for this speed and also the temperature? I was thinking to OC it to at least 3.66Ghz...what would be the voltage that is recomended for this speed and the temperature expected?

I am only using stock cooler btw, maybe get a 3rd party later.

TQ.

bumping this thread

Hi there, I wonder that you pro's can help me on how to OC Dual Core celeron E3200 2.4GHz .
Probably to 3.0Ghz.
I hope you guy's willing to help me.
Any comment will i appreciated

Spec's i using :

Intel Dual Core Celeron E3200 2.4GHz
G31TM-P31 MSI mobo
XFX Radeon 4850
2x1GB 800 Mhz DDR2
Acbel 510 Watt E2 power

we dont spoonfed here

so please read 1st one of the many guide u can find on the net

and metsatsu
whats up with the merging error man.look at the title of the thread.

fixed

Mine is.....

got 3dmark benchmark results?

guys,this chip got temp sensor problem? i am running it under TRUEX
core temperature never fall below 42'c

This post has been edited by nicholas0507: Aug 31 2010, 07:25 PM

-deleted-

This post has been edited by DayDream-ing: Sep 1 2010, 01:45 AM

guys2 help me out. i got 2 proc here. dual core E2140 n c2d e6400. if i want to oc which is better? extremely noob asking extremely noob question
my current system is
dual core e2140 1.6ghz + stock hsf
abit ip95 + kvr 1gb
hd3650 n cap ayam psu
had c2d e6400, nvidia gf 9600gt n gigabyte superb which is planning 4 a new system. n also want to oc kaw2 it. help me n give me recommendation plis2

i think cpu temperature should refer to the cpu 28'c.

E2140 1.60ghz 800mhz 65nm 65w
E6400 2.13ghz 1066mhz 65nm 65w

you can try out yourself.
overclock also depends on motherboard and ram.
if you have budget, change the cap ayam psu to branded psu.
and maybe get a better cpu cooler.

need help,how to oc to 2.6ghz++

spec:
c2d e6300 1.86ghz
2gb ddr2 667
2 hdd
1 dvd rom
ati 4670
stock cooler
cap ayam psu

372 x 7 = 2604mhz.
what ram you are using there?
value ram or performance ram?
change the psu if got budget.

341x7 is the highest it could go
using kingston value ram

above that cant enter windows

This post has been edited by DayDream-ing: Sep 2 2010, 05:06 PM

if lower dram multiplier again?