I have a question , I've overclocked my E6300 t0 2.8GHZ for the pass 2 years and today , it cannot boot up, I even try to reduce OC to 2HZ also cannot boot. need stock ?

using a GA-965P-DS3 With Latest Bios.

can't seem to get it stable @ 4.5ghz...

SPI 1M does not prove your current setting is stable neither bro.

-pWs-

I have overclocked my core 2 duo e8400 from 3Ghz to 4 Ghz with 1.3V, cooling is CM hyperN 520, stable for all games so far

u Try OCCt it few hours, see can stable or not

super pi program is a crap tester and it's not the program to determine the system is stable or not.
Use prime 95 instead bro...

try OCCT and linx too!

This post has been edited by kInOzAwA: Dec 6 2009, 09:23 PM

Prosessor: e7400 2.8ghz @ 3.8ghz at 1.32vcore
Mobo :ep45-ud3p
Cooler : killerwhale deepcooler
Ram : crucial balistix tracer 1066mhz
Gpu : eah4850 ati 635/1000

my psu dunt enough supply for more overclock.. need change it




Attached thumbnail(s)

How come? I oc my E7400 w Acbel 450W until 4.2GHz.
Why you so sure is PSU issue?

-pWs-

My New Update
Dual Core E6300 2.80Ghz @ 4.33Ghz@ OCCT 5 Hours
Dual Core E2140 1.6Ghz @3.40Ghz@OCCT 10 Hours

This post has been edited by sky5191: Jan 6 2010, 11:09 PM


Attached thumbnail(s)

A quick question guys!

Which is technically faster to run E7400 @ 4Ghz:
1) FSB 400 x 10
2) FSB 380 x 10.5

FYI, '1)' stable at 1.41v and '2)' stable at 1.39v because obviously lower fsb, but which one edged the other one?
I'm just confuse because both has same rating of 4ghz but I researched that higher FSB yield better performance, but still...

My vote will go for (1).

-pWs-

i own this proc b4. 4.4ghz is rock stable. but 4.5Ghz is no go. watever i do prime will fail after 16-17 min. i thought my mobo was the culprit but now i dunno .

no. 1 is better.
Coz simple.. the performance should be better..

So its confirmed that higher FSB is better, but the difference in voltage of 400x10 (1.41v) and 380x10.5 (1.38v) is 0.02-0.03v, so would you still consider 380 x 10.5 despite being lower in voltage compared to 400x10?
What are your opinion fellas?, and please state briefly why, for education and survey purposes

can i ask something? is it ok to overclock a laptop's processor and video card?

its ok if u can provide sufficient cooling...

hye there.. i have oced my e8400 from 3.0 until 4.0
with patriot viper ram 1066 mhz and asus p5q pro mobo.
tested with w prime.. srble.. is there any other software that u guys suggest to make sure it is stable or not?

hello there.. with 600, what can i get for cpu and mobo only?

I recommend Asus P5QL-PRO (RM300) + Core 2 Duo E7400 (RM380)
This is the best combination I can suggest with your budget, but if you can top-up more on the budget, I highly recommend:
ASUS P5Q SE PLUS (RM330;the most affordable P45 chipset mobo) + CORE 2 DUO E7500 (RM400; very good overclocking ability budget wise)
This combo would last you up to 3 years of satisfied PC usage, so top-up your budget @ RM700.

The are also Gigabyte mobos you should consider, especially the P43 chipsets ones, if you want something else than what I recommended above





This post has been edited by JoBigShow: Jan 8 2010, 07:30 PM

Any more info on the cooling part