here's my E5200...not prime yet.. and not the max oc..

Is it suitable for long term use? 24/7 ok or not? wonder if it can shorten the proc's life..



This post has been edited by ryudox: Oct 12 2008, 02:30 PM

i guess its ok other thn the vcore is abit high for 45nm core... cant go any lower kah the vcore ? try tune some vtt and gtl references and see...

here is my oc result so far.
e8400 e0@3.6ghz@1.27v@400x9

bro,
u claimed it ran at 3.6 but the CPUZ and CoreTemp said otherwise...did u forget to disable the EIST...seems the mutiplier has dropped to 6x instead of 9x

when i oc i dont disable EIST.
its just my thing.



and i also disable thermal control

This post has been edited by hilmiangah: Oct 12 2008, 08:58 PM

[quote=tAmp0i,Oct 5 2008, 10:16 PM]
Hmm.... Got this from Robyn thanks to Raymond batch no. Q828A699.... Awesome chip



me also got the same batch chip.,i wanna try to oc but dunno how to get 4GHZ.,the highest i can go is 3.80GHZ only..i'm using with gigabyte ep35-ds3p and Gskill 4gb-ddr-1000

This my 1st try oc to 4Ghz..i wanna try to tight the ram timing but only can get to 5-5-5-12 only.,i tried 5-4-4-4 also cannot..do i need to change other setting..


Attached thumbnail(s)

I guess I will keep money till end of this year to get a Nehalem rig

end of the year ya...ok, already included in the 'To-Do List'
any indicative price range?

anyone knows how to oc q6600 using p5n32e-sli plus??plss help mee!!!

good luck on this coz as far as I know, p5n32e-sli plus can't overclock much... correct me if i'm wrong....

if wanna OC, just read up some guides 1st to give u a rough idea on how..... to get the best OC, just remember u hav to try to raise the FSB as high as possible while maintaining a low vcore....

owhh ok,no wonder la i every time i oc,system dont boot up...can u give me ur oc setting??

Any Q9550 user here?

Latest NV driver:
http://www.nvidia.com/object/winvista_x64_178.24_whql.html Windows Vista x64
http://www.nvidia.com/object/winvista_x86_178.24_whql.html Windows Vista x86

yep,kinda agreed.i know some guy who been using striker extreme and it doesnt goes well with quad but with core2duo its

first try after cleaning up my system

http://valid.x86-secret.com/show_oc.php?id=433901

This is the laziest thing to do

Nice result BTW..

@syazone

bro.....wat cooler?

hahahaa well said, i wonder why my temp at stock speed can climb as high as 70C even when idle, later i found out that HSF full with dust
having clean up that mess, temp drop to 46-48 (stock @ idle)
its just stock cooling BTW 3.0Ghz, idle around 58C, full load 69-70C

---

Added on October 19, 2008, 8:04 amforgot to tell, its undervolt, 1.312vcore , maybe can go higher if i pump more vcore, but not dare to do that, temp at full load already reach 70C,

This post has been edited by syazone: Oct 19 2008, 08:04 AM

lowyatians...
a year ago when i stressed the importance of gtl..
everybody was saying not important..
even this idiot who was a elite so called was saying that
and now they are saying gtl but dont understand it..

theres no sweet spot etc and gtl's are just one value which u can find it using a vmm.. anything else is just unstable values or u just overvolted ure proc a wee bit thats about it...

all this flukish gtl's that everybody is guessing is just to lower the nb/vtt voltage to make ure nb more stable.. thats it...

not much for vcore for dualies.. more for quaddies still.


This post has been edited by cstkl1: Oct 19 2008, 09:35 AM