bios 2.5vdimm , but everest list out 2.55v.
when the time I tweaking my ram , then I'm thinking about 1066 xtreem , its so sweet. too bad bo lui.

next time try to whack 8500 cl4 business. more heat room.

Comeback to my e8400(C0) and some tweak, now i would able to stable @ 3.8ghz with 1.25vcore(in bios), 1.25v(vdrop on load) 1.28 idle in windows... Last time this proc need 1.3vcore and above for the speed without gtl reference tweaking.


bios screenies:

Be careful of that kind of vdimm on gigabyte board,your ram will kong soon.
@TKH,depend lor,will do when mood is right

4ghz attempt... with lower vcore compare to last time, think need 1.4vcore last time with vdroop control: ON on my P35 UT

note tht vcore i set in bios is 1.325v. Windows report idling @ 1.35,1.36(flunctuate from time to time) load @ 1.33v when running IBT 1.6

ran a test early this morning on my E8500 E0 at 4Ghz...still running...so far, so good...gonna use this for 24/7 setting...vcore at bios is 1.30v..temp is a bit high but i think still in the green zone.
is it ok for a E8500 E0 with that speed at that vcore?


*****updated*******
done 8hrs of orthos...


This post has been edited by remysix: Oct 5 2008, 01:19 PM

nice, same clock as mine, but me alitle bit lower in vcore.
mayb can try lower thee vcore?

This post has been edited by hengmy: Oct 5 2008, 01:44 PM

will try that later...i've just pumped in 1.3v and run the test ...so urs is at 1.26v rite..izzit bios or vdrop/vdroop?

This post has been edited by remysix: Oct 5 2008, 02:04 PM

E8400 E0 test run Prime95 at 4.25GHz, 1.26v stable...


Attached thumbnail(s)

wow! very nice chip u got there...what's the FPO and where did u buy it?

in bios 1.275v, full load at 1.264v

Not enough push higher

how come no data record from e8200.. =.=

I'll be updating the list soon guys! I'm having exams now so bear with me, k?

Anyone who wish to have their name in the list, please PM me the details to update!

Hmm.... Got this from Robyn thanks to Raymond batch no. Q828A699.... Awesome chip

Will try on 4.5GHz or 5GHz later.... Thanks for the drink that day bro, and also very good show there, will drop by anytime if got time

This post has been edited by tAmp0i: Oct 5 2008, 10:18 PM

wow nice clock..waiting higher one

I will make my post for update tomorrow
E8400 and E8500

Hi there,

Tweaked my q9450 for awhile. It seems this is the furthest I can go, any higher result in no post system. Memory is kinda loose, will try to tweaked it even more when I am free

Could not get to 470 fsb as it will result in no post system.

ps: I am using stock hsf that is why the temperature is rather high. Bios show temp of 35idle and full load 60+. But real temp show idle 50 full load 70+.


Attached thumbnail(s)

Bro silverfire,

Please update mine.
Thanks a lot.

14.637 - -pWs- - 3.508GHz, 467 x7.5 / DFI DK P45 / 4GB DDRII-935, 4.0-4-4-8 / Thermalright 120 Extreme



-pWs-

This post has been edited by -pWs-: Oct 6 2008, 02:25 AM

Guys, please PM your entries to me so I don't have to browse page by page when I wanna update them >.<

5G result???

I'm still testing my E8500 at 4G, lowering the vcore...currently running Prime95 at 1.275vbios/1.264vdrop...no vdroop on my mobo...quite surprise.
already passed 7hrs when i was leaving to work this morning at around 7am...hopefully no prob.
later on will only see how hi can it go...5G is a no-no on air i guess...