first try after cleaning up my system

http://valid.x86-secret.com/show_oc.php?id=433901

hahahaa well said, i wonder why my temp at stock speed can climb as high as 70C even when idle, later i found out that HSF full with dust
having clean up that mess, temp drop to 46-48 (stock @ idle)
its just stock cooling BTW 3.0Ghz, idle around 58C, full load 69-70C

---

Added on October 19, 2008, 8:04 amforgot to tell, its undervolt, 1.312vcore , maybe can go higher if i pump more vcore, but not dare to do that, temp at full load already reach 70C,

This post has been edited by syazone: Oct 19 2008, 08:04 AM

check mobo revision first... for example, only rev 3.3 of 965P-DS3 support 45nm & 1333 fsb cpu

i've chnge my cooler to S1283 yesterday, and i'm really impress with the temp, before this, full load at 3.01Ghz sure will hit 70C, but now its only up to 55 C

the problem is, i cant get it stable if push beyond 431fsb... tried 450fsb and increase vcore step by step till 1.45, VTT +0.2, vMCH +0.1 all fail, what should i do is my cpu hitting fsb wall edi?

BTW: here is my spec

E6300
GA-P965-DS3 F13
2x2gb gskill PC8000

This post has been edited by syazone: Nov 2 2008, 10:55 AM

wahh how much? can those air cooled 'tahan' with higher voltage?

i've stated b4, i'm using s1283

This post has been edited by syazone: Nov 2 2008, 11:23 PM

thanks for ur advice... will try later & report here

with QX6800 flooded LYN tradezone, i demand OC result!!

This post has been edited by syazone: Dec 24 2008, 08:24 AM

ermm... my final oc test using antique e6300 + ep45-ud3p

472 x 7 = 3.304 Ghz

cpuz validate link http://valid.canardpc.com/show_oc.php?id=653887

vcore at bios 1.475 , vdroop 1.39-1.42
vtt 1.32



This post has been edited by syazone: Aug 15 2009, 09:33 AM