Outline ·
[ Standard ] ·
Linear+
★★★ LYN PROTON WAJA Club - V10 ★★★, The Journey Never Stop!! Vroooommmmm~~
|
Krools
|
 Sep 16 2010, 04:12 PM
|
Getting Started
|
This morning i found oil on the floor of my car park.
is seems like its coming from the gearbox section.
from what i check alot of oil sluggish on the gear box, n originated from the atf oil check stick, the one just like engine oil check stick.
the atf oil check stick rubber already worn out i think, n i hope it can be solve by changing it.
anyone else ever face this problem? or is it simptoms for something much more serious??
|
|
|
|
|
|
Andy0625
|
Sep 16 2010, 05:54 PM
|
|
|
QUOTE(Krools @ Sep 16 2010, 04:12 PM) This morning i found oil on the floor of my car park. is seems like its coming from the gearbox section. from what i check alot of oil sluggish on the gear box, n originated from the atf oil check stick, the one just like engine oil check stick. the atf oil check stick rubber already worn out i think, n i hope it can be solve by changing it. anyone else ever face this problem? or is it simptoms for something much more serious?? I'm having the same problem like yours , ATF fluid dripping slowly from the square black box that contain the ATF. Changing the gasket might need to replace 8L of ATF fluid and it'll be pretty costly. Better do full flush together aswell. Does segaria got the machine to do full flush ? |
|
|
|
|
|
nayte
|
Sep 16 2010, 06:51 PM
|
New Member
|
QUOTE(Andy0625 @ Sep 16 2010, 05:54 PM) I'm having the same problem like yours , ATF fluid dripping slowly from the square black box that contain the ATF. Changing the gasket might need to replace 8L of ATF fluid and it'll be pretty costly. Better do full flush together aswell. Does segaria got the machine to do full flush ? not sure abt that. call up mr raja to see cause my car dont use ATF lol. nvr seen one before. replaced thermostat for rm45. japan made. but no labour charges la. now car's back to normal  |
|
|
|
|
|
jolipoli81
|
Sep 16 2010, 07:06 PM
|
|
|
QUOTE(nayte @ Sep 16 2010, 06:51 PM) not sure abt that. call up mr raja to see cause my car dont use ATF lol. nvr seen one before. replaced thermostat for rm45. japan made. but no labour charges la. now car's back to normal got difference between japan made and...locally made? did it solve your problem? |
|
|
|
|
|
mao2
|
Sep 16 2010, 08:54 PM
|
Getting Started
|
QUOTE(yngwie @ Sep 16 2010, 02:19 PM) so far, the most suitable i'd ever use was the twin pot evo 4 brake. plug and play. new disc(4xx bucks) / pad(1xx bucks) replacement is widely available. halfcut cost in the region of 600 bucks with labour your 17" wheels looks nicer with big disc and twin pot caliper  btw, 4 pot nissan from r3x series and mitubishi gto need some modification. and costly spare parts. QUOTE(jolipoli81 @ Sep 16 2010, 03:55 PM) if twinpot isn't your choice, you could do things like upgrading to better pads, steel braided hose, evo3 brake servo or bigger rotor(i forgot which brand is it that suits our waja, just plug and play) isn't it evo3? because it is 4 holes, but there's some modification on knuckles right? yup been thinking to take the long road or the short road.. as steel braided hose, brake servo, bigger rotor but then again twin pot is another good option therefore if changing to twin pot i would want to do 5 lugs conversion on the knuckle also.. is there any with both twin pot and 5 lugs knuckle?? |
|
|
|
|
|
nayte
|
Sep 17 2010, 12:53 AM
|
New Member
|
QUOTE(jolipoli81 @ Sep 16 2010, 07:06 PM) got difference between japan made and...locally made? did it solve your problem? it's the same thing basically. opening of thermostat is same temperature. problem solved. now my car operates at normal temperature again |
|
|
|
|
|
jolipoli81
|
Sep 17 2010, 12:59 AM
|
|
|
QUOTE(nayte @ Sep 17 2010, 12:53 AM) it's the same thing basically. opening of thermostat is same temperature. problem solved. now my car operates at normal temperature again good to hear that lets get in a TT dudes...getting bored here |
|
|
|
|
|
kobe10
|
Sep 17 2010, 01:47 AM
|
New Member
|
QUOTE(jolipoli81 @ Sep 15 2010, 06:14 PM) sorry, i don't think i'll go for open pod, because im on auto  me and sam going for sachs  waiting for your sachs bro once arrive straight call you guys.. hehehehe... Can CPS waja use open pod?
Added on September 17, 2010, 1:49 amTT? When? Where? OMG, last night went to klang setia alam.road so straight. but running on low fuel..if not sure pecut..... This post has been edited by kobe10: Sep 17 2010, 01:49 AM |
|
|
|
|
|
jolipoli81
|
Sep 17 2010, 01:53 AM
|
|
|
QUOTE(kobe10 @ Sep 17 2010, 01:47 AM) once arrive straight call you guys.. hehehehe... Can CPS waja use open pod?
Added on September 17, 2010, 1:49 amTT? When? Where? OMG, last night went to klang setia alam.road so straight. but running on low fuel..if not sure pecut..... yup, CPS can use open pod my friend did it on his neo CPS MT I just realised it's you kobe, so, when is the sachs coming? do give me a call when it comes, 016 441 8989 im the one who is getting the bulk with sam This post has been edited by jolipoli81: Sep 17 2010, 01:54 AM |
|
|
|
|
|
reef_d
|
Sep 17 2010, 08:59 AM
|
Getting Started
|
guys.. i would like to replace my current oem 15" rims with the perdana v6 oem 16" 6 spoke rims.. is there any reason why i shouldnt do it? not suitable? too heavy? i've always liked the v6 rim design (1st batch) and i could get it at a reasonable price nowadays..  |
|
|
|
|
|
mxsteven
|
Sep 17 2010, 09:27 AM
|
Getting Started
|
V6 rims very very heavy and the tyre in even size which is expensive than 17" tyre. It is a waste of time if u get 16". Either 15" or 17"...
|
|
|
|
|
|
reef_d
|
Sep 17 2010, 09:57 AM
|
Getting Started
|
thanks for the heads up.. =)
thinking of changing my waja front bonnet to noseless cps type too..
any1 wanna sell theirs?
|
|
|
|
|
|
ThunderGod_Cid
|
Sep 17 2010, 10:00 AM
|
Getting Started
|
TT tonight ulu yam drive?
|
|
|
|
|
|
mxsteven
|
Sep 17 2010, 10:07 AM
|
Getting Started
|
TT tonight hmmmm great
Whos in?
Shortie... Oppss Elton
MXsteven
|
|
|
|
|
|
ThunderGod_Cid
|
Sep 17 2010, 10:44 AM
|
Getting Started
|
cipettttt
|
|
|
|
|
|
jolipoli81
|
Sep 17 2010, 11:59 AM
|
|
|
haha, me in me in!
love the ulu yam road
|
|
|
|
|
|
ThunderGod_Cid
|
Sep 17 2010, 01:14 PM
|
Getting Started
|
1. steve
2. Elton
3. Danny
4. JERRY!
|
|
|
|
|
|
mxsteven
|
Sep 17 2010, 02:08 PM
|
Getting Started
|
Maybe tonight i cannot coz this morning there was a flood so my engine bay now very dirty.... have to clean edi.... my headlamp also masuk air knn...
|
|
|
|
|
|
Andy0625
|
Sep 17 2010, 03:25 PM
|
|
|
Danny so fast back to KL already ?
|
|
|
|
|
Quote
0.0308sec
0.93
6 queries
GZIP Disabled