You mean Core 2? But literally doesn't seems like a damaged core. Maybe any experts care to advise him

i think shouldn't be a defect core, just the calculation got wrong result at the core, mean this overclock maybe cause error.

kontroversi ke spekulasi ke... kite tunggu & lihat ajer...

try these:

ht link @ 7 * 300
nb freq @ 8 * 300
ram near 1333/1600 (depend on how well it clock)
vhtt @ 1.3v
vnb @ 1.25
vimc @ 1.25~1.275v
vcore stay below 1.5v.

i always use customed blend test, min @ 8, max @ 4096, minute = 1

not all core have d same capability, there is/are always weaker core(s). weaker core(s) != bad core(s) thou, AMD never guarantee all d cores in their chips have d same mileage, unless we are talkin bout stock clock.

This post has been edited by ah_khoo: Jul 23 2010, 03:44 PM

one prob bro ah_khoo, in my BIOS, no option for vhtt, no option for multi change of nb freq. see here in the pic of the BIOS i took fom the net..

---

Added on July 23, 2010, 8:10 pmmy mobo is gaygaybyte 870a-ud3 btw

---

Added on July 23, 2010, 8:15 pmthe pic i posted was ddr2, mine using ddr3, but other are the same, just in case

This post has been edited by selferino: Jul 23 2010, 08:15 PM

Did u press CTRL+F5 or was it F8 to unlock extra option in the bios?
Gaygaybyte are always like that, they like to hide some options using that

isnt f8 for safe mode thingy?

im sad..no one want to buy my mobo.. price reduce even more also dont have takers.. special for AMD ocer kaki.. rm170... kekeke

isnt it CTRL + F1?

yeah its CTRL + F1 but thn no OC option will come out, already check the manual anytin, man, my msi mobo last time even has more option!

---

Added on July 23, 2010, 8:48 pmonly some chipset confiq only(spectrum stuff bla3)

This post has been edited by selferino: Jul 23 2010, 08:49 PM

im not sure what problem you are facing but the bios looks like typical giga bios most options are similar with mine

Aisyemen bro, sedey reading ur post, if had extra moolah i bought the item back from u
Give it some time, i know someone gonna want that mobo

vht/vsb also dont have?
that msi sure have richer bios..but the ocability not that well i guess.. even the voltage increase is finer..

tried with HTT multi combo edi?

from d manual in MIT:

cpu clock ratio = cpu multi
cpu nb freq = cpu nb aka nb freq multi
cpu host clock control = htt
pcie clock = pci-e freq
ht link freq = ht link multi
set mem clock = mem divider
dram config = mem timing

set sys voltage ctrl = manual


d rest like what mentioned b4. quite direct if u ask me...

owh yeah my mistake, no otption for ht link multi, only freq, n no option for ht link volt setting. MSI still has these as far as i can remember, why not gaygaybyte? shud i use AOD instead? but thn evertime i OC, like if i set the bios for cpu vcore at 1.47v, n thn go into windows n open AOD, it willl read at the default volt(1.4v), same case goes to the cpu-nb volt. but AOD alwat gets the cpu freq ryte( so does cpu-z )

can't be... if ur not gettin what u see (after pressin ctrl + f1 in bios main page) as d ss posted, then something wrong with d bios. have u tried other version of bios? msi bios is decent but i'll take award bios anytime anyday if d board can match what i wanted. never trust aod as its compatibility differ from boards to boards. i trust cpu-z & hwm more. some more, u got easytune & d wattage monitor tool there w/ u, why not make use of it?

as far as i know, AOD doesnt read the actual voltage

ive no regret buying ur mobo tho. at 1st i just want to buy another 1..but thinking of a HDD, i need to sell this mobo.. nvm..for this time being, i will use this mobo 1st.. kekeke

basically there is 2 "vcore"
cpu vid and cpu voltage
CPU VID is the voltage that the proc demands.. non BE proc will permit 1.35vcore max only (depends on proc maybe).BE might go as far as 1.55v.. . normally shows as 1.3v, 1.35v like that...the exact value of vcore..

and another one is cpu voltage or any other name that similar (but not CPU vid)
this always shows in +0.01v , + 0.02v like that la..showing increment.. so this cpu voltage will add up to the value of CPU VID...

gigabyye (or atleast mine) dont have the option to alter the CPU VID..and AOD will detect the CPU VID..not the total amount of vcore (cpu vid + the increament)

er..correct me im im wrong tho..

Errr guys.. any particular batch number that I should be paying attention when purchasing a 1090T BE for OC?

This post has been edited by ConquerorX: Jul 24 2010, 11:58 AM

Not that we know of, so far not may users of 1090T yet, 1055T seen quite a few already

1090T not worth the price paid....its freaking RM300++ higher ~_~

Perhaps I should be getting a 965BE rather than 1090T?