i just found this thread and looking at u guys results makes me itchy to oc!!!

There's a new Palermo based on E3 revision, which is Venice

that one can take quite awhile to reach our shores bro, unless someone make a bulk

but then again, it'll probably be sold out early coz seems everyone's itching to get them maybe get a turion

i'm sure dinster can make it

unluckily, i ordered too soon. looks like i'll be getting the D0 revision only

how to check the memory controller is dead on winnie? i'm just curious seeing ppl with dead mem cntrler. just like to know what happen to the proc
actually?

Any free increment in performance is good..
Synthetic bencmark shows that DC has double data bandwith compared to single..
But this doesnt translates to 100% increase in total system performance.
But if i were u, will not bother running single when i have DC.
Infact i never before try running on single. All those figures i come up with, is on DC all the time.

finally...got my ram stick on DC...and the hsf alligned on the proc...but with some mod on the xp120...last time, cannot put the hsf flat on the proc...running DC alright, but the temp is suicidal...reached 80c on full load...due to the small gap between hsf and proc...but now ok already...temp is 34c at idle...full load around 40c@1.60v...

full load at 40 degrees? u mean u prime with that temp?
ur xp is bloody effective then, ive seen xp120 not so effective, So i presume that delta really helps a lot.

yup that damn cool man 40deg. mine with 1.58vcore full load is nearly reach 50. urs is 1.65 only 40?? guess xp120 really better than xp90.

It shouldnt be waaay better than xp-90, Air-con room or lower ambient might be the reason..otherwise i dont see the temp is correct..

just done my merely 5 hours prime on 260x9.0...the temp at full load is 44c degrees...picture capture...but i stop the prime then capture...already drop to 38c...very fast la this xp120 do its job...actually this xp120 is cacat a bit...i've already peeled off 2 of its fins to make way for my twinx pro on DC...but performance wise...still ok...trying to prime 265 now...and see how hi can my cbbid 0504 can do...wish me luck

added: my room has no aircond...and it's very humid...i also cannot tahan stay in here for more than 5 minutes without the ceiling fan switched on...

This post has been edited by remysix: Apr 8 2005, 06:14 PM

Any proc will quickly drop the temp regardless of any hsf applied..
thats why when u want to capture screenies make sure it is in the middle of priming..

haha...that's the mistake...actually taken already and stopped the priming...but forgot to include the cpuz...so lauch the cpuz and capture again...replace the 1st one...btw...just finish the 265...temp is 46c-47c...that would be normal at full load huh...ok...going for 270 now...

prime stable at 245x10...


Attached thumbnail(s)

ok...prime stable at 270...gonna take a break for now...will try higher fsb later...


Attached thumbnail(s)

wow..45 is freakin cool
mine doing 275 last time on devider, it was 53C [stock HSF]

with stock hsf, you'll get stock kinda temp la...if ur stock can do as good as my hsf...i'll be damn rugi buying this hsf

This post has been edited by remysix: Apr 9 2005, 11:19 AM

max bootabel at 2510Mhz

251*10 at 1.67Vcore

This post has been edited by shadow_dweller: Apr 9 2005, 01:03 PM


Attached thumbnail(s)


Attached File(s)
 2510Mhz.bmp ( 1.37mb ) Number of downloads: 12

mine at 250 fsb vcore 1.42v running 24/7, fan speed at 2700(so silent haha)
max temp 48. satisfied with my cooling too but that xp120 of remysix is damn cool. i only run at higher clock for benchies.

48 is still good what...at 275...failed priming within minutes...need to pump in more juice i think...we'll do it shortly...now running at 270...idle at 33c...i think i'm gonna use this for my 24/7 since already primed it for 7 hours...hope can go higher considering the proc is cbbid 0504mpmw...300 would be impossible...at least not with air cooling...

/offtopic: rzone...if u ever wanna upgrade ur gfx...please let me know...i've one same as yours la...maybe can do sli...chipset is moddable...