in bios, put ram divider w/ 133 or 166, then try to get highest clock w/ stock voltage, if ceiling hitted, increase d voltage accordingly w/o fryin ya chip...

i shall bear no responsibility if happened u really fry ya chip...

Bro...

Please read all the guides in the pinned threads b4 asking any questions....without reading and just askin you will endup with either someone's/moderators FLAME Of Passion....or ur post will just be deleted and ignored....

I suggest you read at the pinned thread which is helpfull with links and tips on how to overclock a system...Overclocking is not like sex, where u just go buy equipments and just hammer it on....it is like love...needs commitment, love, care and passion..with it the u can have a great love making.....

wow he had one?
the other guy is babyelf, but he didnt get it here i think

dowanna reveal yet la, in case its a let down
but i'm not really expecting more than 2.8ghz or anything, something nice to play around with though

dun include babyelf lah, he's on other level...

2.8xGhz should be d max for moderate air coolin, to get pass d barrier a set of decent WC is needed...

normally what are the settings you guys use for P95 stability test?

Anybody here got DTRs or Mobiles? Finally set mine up after a round of cutting and sanding to get my XP-90C on that baby. Attempting to flash the BIOS and turn up the speed with my BH-5.

Anybody here wanna join the Mobile 64 club?

My test setup, the mobo and Corsair VS limitting me....

Any 1 using 1GB bt-d43? I have 1 can do 250 easy on 1:1 but cannot touch 230 on 5:6 divider...any 1 help?

cpu only = custom 8K-512K (depends on L2 cache), in-place FFT
cpu+ram = blend

i've currently done 7hrs++ at 2.6ghz on small-FFT test for P95. looks good.

anyway, here's the screenie. please update 1st page. thank you.

btw the vcore here is 1.65 with air-cooling, stock HSF.

This post has been edited by goldfries: Dec 6 2005, 06:24 AM


Attached thumbnail(s)

last time i wanted to get the processors in LYP but they say dun have sell wan...only comes in bundle....

well there goes my toy...
was an ES but doesnt seem to work with my Ultra-D

the one from elhh?

bios problem mebe?

nah i got it from the main guy
tried 3 different bioses also can
boohoo...nothing to play liao

hmmm, edited again, imageshack for my pic doesnt work.
will post again later
want to ask about my new Venice 1

This post has been edited by kanethesun: Dec 6 2005, 11:33 PM

Suggest popping in a good chip and setting the voltage to the ES's rated level, this voltage crap happens sometimes.

tried that too, set the multi, fsb and voltages but it still didnt work

Just tried this today, any comment that whether I can go further more?

wahhh...370w only ahh????

hmmmm...why ur ram timing so so wan???can it be civilised a lil bit....??? i.e 2-2-2-5 or 2.5-4-4-8 or 2.5-3-3-x

the enermax for the palomino 1, hahah
erm, I not really sure how to tight up the timing, tried A64tweaker, once set the timing to low abit than straight hang, no idea whats going on

do it from bios lar fren...amd tweaker not so fond on all mobo...