aus..

the person that got the week 25 venice doing 2.7 stock volts..

got someone to go to that place and look

anyone has done OC of S64 2500+ with DFI NF3 250gb ? can share the experience & settings ? i tried with mine using khx pc3500, can get 235x7 only...higher setting cant get the winxp to bootup properly

i think jslut, soulfly n embuhnator may help, they hv the same mobo there

btw hows ur board looking? nice ar especially UV look?

ok, thx man;)
haha, it looks nice but i dun have uv light to make it shine

all those 3000+ 939 E6 in my shop now is week32...


thinking whether want to pinjam one to play or not ..

This post has been edited by ahpaul82: Sep 7 2005, 10:30 PM

if pinjam burn the cpu how wor?

There is always a warranty, just get it and post the results here.

burn can warranty 1 meh?

here is mine...

guys, let me show you how powerful a PC in cyber cafe can be...



Got this in Fusion forum(css clan)

i think it's just a flaw in the software

He should press the "report bug" button. There is no such thing as 9.2GHz AMD.

pretty obvious its fake eh, can go for world record already like that

wa dah lama tak overclock. very good la sempron. hey guys is it winfast nf3 250 rs board good for overclock.

sorry to butt in without going through all pages, but i really need to refer thise problem to you overclockers. based on the fundamentals i read, everytime you overclocked you need to maintain the PCI/agp clock to 33/66. i am using Abit KV8-Pro so i used the feature they had on the mobo to lock the values.

nervertheless, when i overclocked my PC to 1917Ghz@213x9 (using A64 Clawhammer 2800+) i can use it to do a little bit of everything except gaming otherwise my Pc will lock up.

here the best part, i released the lock and overclocked again, my pc works like a charm. i really hope someone can sort this out.

Here are my results of sempron64 2800+

HTT = 800MHz
FSB = 268MHz
CPU/RAM ratio (or the other way round) = 3:2
KVR 512mb DDR400 @ 194.9Mhz
CPU, RAM voltage = default
Stock HSF
Mobo = Asus K8V SE Deluxe

it might be a problem with your mobo, check for bios updates
or better google for problems with the KV8 pro, normally others would have experienced the same as you have

I think ianho had experience similar situation here. By unlocking the PCI/AGP lock he manage to obtain stable overclock. I guess there must be something wrong with KV8-pro locking system. To me, as long as there is no sign of damage or corrupted display and data you shall proceed with caution. 213HTT is still a safe bet when you unlock the PCI/AGP frequency. But as I did mentioned earlier, proceed with caution. You will notice the side effect if there is unstability in the system.

As suggested by KilJim, updating BIOS might be able to solve this problem.

sempron good hahahahaha...

e6 stepping

just try ocing with stock hsf




Attached thumbnail(s)

wow seeing u guys oc so high!
but y mine one cannot oc high?
i jus bought a sempron 64 2500+
it is e6 and cpu-z info all same with u guys
mobo is gigabyte k8ns
i can only oc to 230....240 cannot use window
using a chapalang psu and apacer ram
i set the ram to 166mhz before oc so suppose it is "downclock"?
downclock will got prob?