Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
133 Pages « < 127 128 129 130 131 > » Bottom

Outline · [ Standard ] · Linear+

 DFI nF3/4 series (LP and Infinity) users come in, Overclocking ability and troubleshooting

views
     
sniper69
post Jan 6 2007, 02:07 PM

.: One Shot One Kill :. .+|Level 9 Type Shit|+.
*******
Senior Member
7,173 posts

Joined: Jan 2003
From: PCH
QUOTE(ashraful @ Jan 6 2007, 02:01 PM)
thnx guys. just now i put both of my rams on orange slots and now it's already on dual channel... but then, i try to oc my cpu, again i can only reach 255Mhz, sometimes my comp will hang/ auto restart. laugh.gif

i haven't tried to increase my Vdimm yet, but i'll try. neway, i thougth when we want to oc our cpu we have to make the divider 2/3 right? and at the same time do we have to change the timing?? thnx!~!! laugh.gif notworthy.gif
*
i think you RAM can't go at that speed (255MHz), have you try divider? limit the RAM to maintain 200MHz and see how far your CPU can go...usually, i set my RAM divider to 100MHz and try hit as max as i can to my CPU smile.gif
ashraful
post Jan 6 2007, 03:26 PM

Getting Started
**
Junior Member
205 posts

Joined: Mar 2006
From: Shah Alam
guys, i did raised the VDIMM and it works as just like you all said.. thnx~!!

laugh.gif right now i'm doing Ram divider 133Mhz. and just prime my cpu at 160Mhz.. hehe..
rclxms.gif hope that it can reach further.. notworthy.gif

This post has been edited by ashraful: Jan 6 2007, 03:37 PM
gengstapo
post Jan 6 2007, 03:28 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(ashraful @ Jan 6 2007, 03:26 PM)
laugh.gif right now i'm doing Ram divider 133Mhz. and just prime my cpu at 160Mhz.. hehe..
rclxms.gif hope that it can reach further.. notworthy.gif
*
nice job, average of opty 144 can reach atleast 2.6-2.7Ghz but if u were lucky, some stepping able to reach 3.0-3.2Ghz wink.gif

This post has been edited by gengstapo: Jan 6 2007, 03:29 PM
ashraful
post Jan 6 2007, 03:38 PM

Getting Started
**
Junior Member
205 posts

Joined: Mar 2006
From: Shah Alam
QUOTE
nice job, average of opty 144 can reach at least 2.6-2.7Ghz but if u were lucky, some stepping able to reach 3.0-3.2Ghz

hahha.. hopefully... laugh.gif
ashraful
post Jan 6 2007, 10:26 PM

Getting Started
**
Junior Member
205 posts

Joined: Mar 2006
From: Shah Alam
the furthest that i can go is only 312Mhz (2.808 Ghz), vcore default cry.gif
lol.. i thought i can go higher though.. hehhe :
i can boot at 317 Mhz, but then have to increase the Vcore.. so, i think the best one is at default vcore...only a lil difference. heheh

right now i want to test the stability.. hehe

This post has been edited by ashraful: Jan 7 2007, 06:49 PM
seeseng
post Jan 7 2007, 03:02 AM

Swiftlet Enthusiast
*****
Senior Member
863 posts

Joined: Nov 2005
From: KayTee of BolehLand 2nd Class Citizen
QUOTE(ashraful @ Jan 6 2007, 10:26 PM)
the furthest that i can go is only 312Mhz (2.808 Ghz), vcore default  cry.gif
lol.. i thought i can go higher though.. hehhe :
i can boot at 317 Mhz, but then have to incerease the Vcore.. so, i think the best one is at vcore...only a lil difference. heheh

right now i want to test the stability.. hehe
*
Your UCCC should be fine with 166 divider.
avengers88
post Jan 16 2007, 07:43 AM

Whatever man
******
Senior Member
1,615 posts

Joined: May 2005
anyone using DFI lanparty UT NF4 SLI-D ?
i'm using it and i have difficulty playing dota ..
read my thread in technical section ..
plz help me ..
i really want to know whether its my board problem or not ..
cause after i change to this board , it became like that .
serez
post Jan 17 2007, 03:03 AM

serez beznez
******
Senior Member
1,231 posts

Joined: Aug 2006
From: teh intehnets
aiyo.. have a question here wave.gif

i`m planning to change mobo. and the best mobo will suit my budget is dfi infinity nf sli-m2/g (nforce4) am2. around rm430. so i want to know the performance of this mobo so far. anyone use this mobo?

wanna survey before buy it icon_rolleyes.gif

This post has been edited by serez: Jan 17 2007, 03:18 AM
Westley
post Jan 17 2007, 09:55 AM

Night Crawler...
****
Store Representative
679 posts

Joined: Jan 2003
From: PG/KL/CYBERJAYA
QUOTE(avengers88 @ Jan 16 2007, 07:43 AM)
anyone using DFI lanparty UT NF4 SLI-D ?
i'm using it and i have difficulty playing dota ..
read my thread in technical section ..
plz help me ..
i really want to know whether its my board problem or not ..
cause after i change to this board , it became like that .
*
have u reinstall ur OS?
serez
post Jan 21 2007, 07:32 PM

serez beznez
******
Senior Member
1,231 posts

Joined: Aug 2006
From: teh intehnets
aiyo.. nobody reply my q yet? sweat.gif
ah_khoo
post Jan 22 2007, 01:33 PM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(serez @ Jan 21 2007, 07:32 PM)
aiyo.. nobody reply my q yet? sweat.gif
*
it can be answered in d am2 thread, i believe this is 939 platform session... laugh.gif

u wun go wrong w dfi most of d time if not all time... wink.gif
ekok
post Jan 23 2007, 10:59 AM

Getting Started
**
Junior Member
130 posts

Joined: Jan 2003
From: brunei / miri
Hi guys, need ur help on this:
AMD64 3000+ Venice, DFI NF4 LP Ultra-D, 2x 256MB Winbond BH-6 @2-2-2-5 DC

My system has been running flawlessly for about 1yr until last month. At first it reboot automatically once in a while. Then it happens more often and last week it totally cant boot up. I've to boot up with 1 stick of ram to do some testing(everything at default):

DIMM1: tested with both stick, no problem
DIMM2: tested with both stick, no problem
DIMM3: cant boot with either stick
DIMM4: haven tested cos too near to my hs tongue.gif

*when tested with dimm1 and 2 - single-channel mode, it can boot up but very unstable in windows

So i need input from u guys. Could it be my mobo or ram?
Westley
post Jan 23 2007, 01:59 PM

Night Crawler...
****
Store Representative
679 posts

Joined: Jan 2003
From: PG/KL/CYBERJAYA
QUOTE(ekok @ Jan 23 2007, 10:59 AM)
Hi guys, need ur help on this:
AMD64 3000+ Venice, DFI NF4 LP Ultra-D, 2x 256MB Winbond BH-6 @2-2-2-5 DC

My system has been running flawlessly for about 1yr until last month. At first it reboot automatically once in a while. Then it happens more often and last week it totally cant boot up. I've to boot up with 1 stick of ram to do some testing(everything at default):

DIMM1: tested with both stick, no problem
DIMM2: tested with both stick, no problem
DIMM3: cant boot with either stick
DIMM4: haven tested cos too near to my hs  tongue.gif

*when tested with dimm1 and 2 - single-channel mode, it can boot up but very unstable in windows

So i need input from u guys. Could it be my mobo or ram?
*
try with other pairs of ram, set all timing to auto. laugh.gif

serez
post Jan 23 2007, 03:32 PM

serez beznez
******
Senior Member
1,231 posts

Joined: Aug 2006
From: teh intehnets
QUOTE(ah_khoo @ Jan 22 2007, 01:33 PM)
it can be answered in d am2 thread, i believe this is 939 platform session...  laugh.gif

u wun go wrong w dfi most of d time if not all time... wink.gif
*
oh.. is this is an am2 thread or DFI nF3/4 series (LP and Infinity) thread? sleep.gif
am i in wrong section? sweat.gif
just wanna ask few questions about dfi nf4 sli motherboard doh.. anyone have been use this before? DFI Infinity nf sli-m2

This post has been edited by serez: Jan 23 2007, 03:33 PM
ekok
post Jan 24 2007, 10:09 AM

Getting Started
**
Junior Member
130 posts

Joined: Jan 2003
From: brunei / miri
QUOTE(Westley @ Jan 23 2007, 01:59 PM)
try with other pairs of ram, set all timing to auto. laugh.gif
*
i did the above tests with optimized bios setting. Now im running 256mb (DIMM1) @2-2-2-5 1T, so far no problem. Sadly i don have extra ram to test sad.gif
ahpaul82
post Jan 24 2007, 10:59 PM

.:保罗:.
*******
Senior Member
3,795 posts

Joined: Jan 2003
From: .: Old Klang Road :.
QUOTE(avengers88 @ Jan 16 2007, 07:43 AM)
anyone using DFI lanparty UT NF4 SLI-D ?
i'm using it and i have difficulty playing dota ..
read my thread in technical section ..
plz help me ..
i really want to know whether its my board problem or not ..
cause after i change to this board , it became like that .
*
I'm using it,
so far so good,
didn't get me any problem.

What problem you having?
Westley
post Jan 25 2007, 08:10 AM

Night Crawler...
****
Store Representative
679 posts

Joined: Jan 2003
From: PG/KL/CYBERJAYA
QUOTE(ekok @ Jan 24 2007, 10:09 AM)
i did the above tests with optimized bios setting. Now im running 256mb (DIMM1) @2-2-2-5 1T, so far no problem. Sadly i don have extra ram to test  sad.gif
*
flash different bios to try it...
erm, sadly to tell u, sumtimes it need some strange setting to make it normal.
u might need to wait for gsan and other to reply...
i'm always going with low voltage chips, samsung, hynix, micron, infineon etc...
gsan
post Jan 26 2007, 11:02 AM

Electrical RF Engineer
*******
Senior Member
2,471 posts

Joined: Jan 2003
QUOTE(ekok @ Jan 23 2007, 10:59 AM)
Hi guys, need ur help on this:
AMD64 3000+ Venice, DFI NF4 LP Ultra-D, 2x 256MB Winbond BH-6 @2-2-2-5 DC

My system has been running flawlessly for about 1yr until last month. At first it reboot automatically once in a while. Then it happens more often and last week it totally cant boot up. I've to boot up with 1 stick of ram to do some testing(everything at default):

DIMM1: tested with both stick, no problem
DIMM2: tested with both stick, no problem
DIMM3: cant boot with either stick
DIMM4: haven tested cos too near to my hs  tongue.gif

*when tested with dimm1 and 2 - single-channel mode, it can boot up but very unstable in windows

So i need input from u guys. Could it be my mobo or ram?
*
it mostly due to the DS/DDS setting. you have to try these setting patiently. my bh5s also run flawlessly for few month on SLI-DR Expert but the mobo suddenly acting weird, reboot and cannot booting up, but once I replay the setting again, everything are ok. smile.gif
ekok
post Jan 26 2007, 04:02 PM

Getting Started
**
Junior Member
130 posts

Joined: Jan 2003
From: brunei / miri
QUOTE(gsan @ Jan 26 2007, 11:02 AM)
it mostly due to the DS/DDS setting. you have to try these setting patiently. my bh5s also run flawlessly for few month on SLI-DR Expert but the mobo suddenly acting weird, reboot and cannot booting up, but once I replay the setting again, everything are ok.  smile.gif
*
Hmm... will try that out later when i get back. Any recommended settings for DS / DDS? tongue.gif
gsan
post Jan 27 2007, 12:34 AM

Electrical RF Engineer
*******
Senior Member
2,471 posts

Joined: Jan 2003
QUOTE(ekok @ Jan 26 2007, 04:02 PM)
Hmm... will try that out later when i get back. Any recommended settings for DS / DDS?  tongue.gif
*
hope that following step would help you a abit.

1. Don't set MAL and RP under bios. You have to set AUTO.
2. IdleCycle Limit - set to auto under bios to boost MAL tighter.
3. If go higher fsb, then DS can go with 1. DDS sometimes can be tricky, if you have very strong ram, try 3 first, but always from auto, then if safe, go 2 then go 3, normally 2 is just perfect for average users.

QUOTE(Westley @ Jan 25 2007, 08:10 AM)
flash different bios to try it...
erm, sadly to tell u, sumtimes it need some strange setting to make it normal.
u might need to wait for gsan and other to reply...
i'm always going with low voltage chips, samsung, hynix, micron, infineon etc...
*
sli-dr expert limitation TCCD, you should try Venus tongue.gif

This post has been edited by gsan: Jan 27 2007, 09:56 AM
« Next Oldest · Overclockers United · Next Newest »
 

133 Pages « < 127 128 129 130 131 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0311sec    0.61    6 queries    GZIP Disabled
Time is now: 1st December 2025 - 11:54 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.