whoah...

anyway, set at 2.8, detected in BIOS 2.87, windows, 2.83
DS/DDS - , havent done it before, will try it tonight...auto timing? done too, same, it seems like i can't go in 1:1

mobo faulty?
pretty confusing, currently already 47hrs uptime overclocked too, no BSOD and very stable, done the primer too... if indeed faulty, it could be in doom now...

well i'm facing some problems, but nobody here have experience.
now running 4x1gb @ 200mhz, all default.
my sli-expert get an unexpected vdrop for vdimm, set 2.66v@bios.
but, boot in windows is 2.60v, is quite acceptable.
once run sp2004, drop to 2.53! and get error

This post has been edited by Westley: Feb 6 2007, 10:40 PM

if that, i think is about your PSU la...

already crazy...
dunno what happened...
seems like 4gb doesn't work...
use back my 3500LL no problems...

alohaa..im use dfi lanparty sli D..any new update bios for it???
rite now im use the official bios rev A3..

guys...anyone knows how to flash fresh bios for UltraII m2 infinity..
my friend got problem with his board..cannot boot at all..
i don't know where he got this info..but he said that maybe the current bios has corrupt...and i guess maybe coz of too much oc...

This post has been edited by mr_habuk: Feb 10 2007, 04:31 PM

Hope it helps you

http://www.lejabeach.com/DFI/dfinfultra2-m...fultra2-m2.html

-pWs-

hey guys...
regarding my problem that can't pass in primetest at DDR660 (well, i used to run in this set before this), i think it's my motherboard...not my PSU though, because change the PSU (SilverStone ST56ZF), still the same...

thanks dude...

now the ram can run ddr400 1:1 ?

i think he already say still cannot ar....
have try the team Xtreem to another mobo?
if yes then it is mobo problem ar...
as i know u dont have problem running at DDR660 before right?

This post has been edited by sempronic: Feb 11 2007, 06:58 PM

hey, i'm the one mentioned by mr habuk. it's not that i'm looking for a new bios, but my mobo cannot boot at all. i've tried to clear the bios with the method as mention in dfi-street, be it the short or the overnight duration, but the computer still will not boot. i've transferred the cpu, memory and graphic cards to my other rig and the things boot up without problem, hence rule out the possibilities of damage parts. i'm pretty sure i corrupt the bios, so i want to ask, if anybody know of any shop in lowyat that offer the service of hotflashing bios, or offered bios chip for sale, if not i would have to buy a replacement chip from uk and it will cost me 12 pound. any help, thanks.
p/s - i cannot access the forum during office hour, so feel free to email me if you've got answers or suggestions, thanks

This post has been edited by zuhair: Feb 13 2007, 01:07 PM

not 1:1, but yes, at DDR405 to be exactly since i'm on memory divider, CPU clock at 2.835GHz while RAM's clocked at DDR405 @2-3-2-6 2.8vDIMM

i tried, it runs perfect under other mobo lo...pening lalat sudah...

mobo start acting weird... can take to rma liao...

, the problem is...i bought this from one of our forummer, he's a Johorean and it's like what, almost 10 months woor till now...i hope still warranty...anyway, that (acting weird) can happen? ...

why not? since you had tested the psu and ram are ok, so what else could be cause the problem? All DFI mobo got 2 yrs warranty from alphamatic

tried to call him/sms him but failed, anyway...no receipt, no RMA right......actually he bought it from Singapore...

my dfi sli-expert also send for rma...
just one year, it become unstable.

now playing with new toys, asus commando.
and just an old pentium 4 lga775+ 1 stick of ddr2 ram.

I'm confuse that which BIOS is optimized for tccd, -1 or -3? because what I found from XS and TechPowerUp! website given 2 different answer.

btw, try it on opty 146 which has stronger memory controller,

Idle Cycle = 16
DS/DDS = 8/3



This post has been edited by gsan: Feb 20 2007, 01:45 PM

nice on there bro...

vdimm used? am sure this baby capable of atleast 31xMHz at looser timing...

my experience tells me that 0406 is gud for tccd...