Outline ·
[ Standard ] ·
Linear+
DFI nF3/4 series (LP and Infinity) users come in, Overclocking ability and troubleshooting
|
gengstapo
|
 Oct 3 2005, 05:27 PM
|
|
hurmm got prob here..
yesterday juz get corsair tccd 512mb x2 to replace my ocz bh-5. i put(dual channel) the tccd bo my mobo(DFi NF4 Ultra Infinity) but cant reboot, sometimes keep on restarting.
i already fLash to latest BIOS(sure BIOS autoload default setting) but still kenot fix my prob. the weird wan is, when i put both tccd in single channel mode, it running smoothly!!
currently im running both tccd in single channel, what a waste?!!
can anyone help me fix this proble??
|
|
|
|
|
|
gengstapo
|
Oct 3 2005, 06:08 PM
|
|
|
cleaning 4 what?? edi mention there, when running single mode(512mb x2), it can run smooth, but if dual channel mode, keep restarting/ booting only.
|
|
|
|
|
|
gengstapo
|
Oct 3 2005, 10:22 PM
|
|
|
QUOTE(remysix @ Oct 3 2005, 06:56 PM) he meant the dimm slot la bro...sometime those particle of dust can accumulate in the valley and probably kacau the stability. when u run on SC, surely u used different slot, isnt it? that's one probability... but then u might want to memtest the stick individually just in case... QUOTE(Westley @ Oct 3 2005, 07:00 PM) at least u get my meaning clearly... ** well, juz settle my prob. mostly i feel the prob is my mobo(WTF!). but, if using BH-5, can do dual-channel, using tccd kenot  juz re-assemble my rig but using asus(k8t890), but the ram working juz fine in dual channel. kenot understand leh y this happen?  |
|
|
|
|
|
gengstapo
|
Oct 8 2005, 12:25 AM
|
|
|
QUOTE(DaBaD @ Oct 7 2005, 09:38 PM) Yo bro, settle or not ur prob? I suggest try looking at DFI-Street hohoo.. at the moment look settle edi la(run at my asus a8v mobo) but, to know later, i will go to lyp to get new mobo wif nF4 ultra chipset hope it wont let me down again. edi spend alot $$$ |
|
|
|
|
|
gengstapo
|
Oct 9 2005, 08:40 PM
|
|
|
im just into DFi, & my rig got problem. cant even format/ install new windows can any wan PM me the most working DFi Genie Setup with TCCD RAM. motherboard : Dfi UT nf4 Ultra-D thanks This post has been edited by gengstapo2: Oct 9 2005, 08:41 PM |
|
|
|
|
|
gengstapo
|
Oct 10 2005, 09:43 PM
|
|
|
QUOTE(babyelf @ Oct 9 2005, 09:30 PM) just want to point out gengstapo's problem DFI NF4 have problems running Corsair ram i've had 3 corsair UTT 3200C2v1.5 and only 1 pair did well.. the other 2 won't do 2-2-2-5 at all and i've seen a lot of cases where 4400C25 and 3200xl won't run on the board and the users had to change their ram to run their system.. just something for you guys to watch out before jumping on to purchase new memory QUOTE(super macgyver @ Oct 10 2005, 05:34 PM) so how is the geil ram with blue heatsink on dfi? walao wehh.. i manage to end all this problem. after doing study almost 1 day(today), i manage to run this "degil" RAm on my DFi. very happy rite now. anything credit to sifus here especially babyelf, really helping me alot  |
|
|
|
|
|
gengstapo
|
Oct 13 2005, 11:28 AM
|
|
|
QUOTE(TaiFei @ Oct 13 2005, 10:55 AM) y is it when oc.. in bios show like i oledi did 240x11 but when in window.. check at cpu-z still 200x11? using nf4 ultra infinity.. hmm QUOTE(lms2005 @ Oct 13 2005, 11:22 AM) yaloh my one also same. bios show 240x9 but inside windows show 200x9. is it consider oc oledi? hey both of u. it mean, u need to update BIOS when the matter like this come  |
|
|
|
|
|
gengstapo
|
Oct 13 2005, 11:31 AM
|
|
|
edit - X2 posted
This post has been edited by gengstapo2: Oct 13 2005, 03:12 PM
|
|
|
|
|
|
gengstapo
|
Oct 13 2005, 11:35 AM
|
|
|
goto http://www.dfi.com.tw & select proper the related product. BIOSes, patches & drivers, all the latest can be find there This post has been edited by gengstapo2: Oct 13 2005, 11:36 AM |
|
|
|
|
|
gengstapo
|
Oct 13 2005, 05:08 PM
|
|
|
QUOTE(TaiFei @ Oct 13 2005, 04:49 PM) nobody face this b4? check ur accessories.. i dont think it is ur hdd, might another hardware plugged into usb port like usb reader, printer etc |
|
|
|
|
|
gengstapo
|
Oct 15 2005, 09:47 AM
|
|
|
is the memtest provide in the dfi nf4 ultra-d is same wif the memtest we run manually?? kinda n00b here |
|
|
|
|
|
gengstapo
|
Oct 15 2005, 02:39 PM
|
|
|
QUOTE(TaiFei @ Oct 15 2005, 01:12 PM) oi geng.. ur dfi ultra infinit got prob running dual chanel b4? when oc? any tips? yepp.. same wif the LP series it dont like TCCD |
|
|
|
|
|
gengstapo
|
Oct 16 2005, 12:06 AM
|
|
|
QUOTE(DaBaD @ Oct 15 2005, 08:23 PM) time to get expert  yeahh.. u r the expert how the ocz el performance??  |
|
|
|
|
|
gengstapo
|
Oct 16 2005, 01:31 AM
|
|
|
QUOTE(babyelf @ Oct 16 2005, 12:21 AM) anyone in for the DFI RDX200 CF-DR? i'll be getting one to replace my ultra-D once it's available here.. and a DFI NF4 SLI-DR Expert as well.. at the moment a few things that people already know 6 layer PCB 4 dimms filled running @ 1T DDR400 4vdimm in small steps 15 levels of Drive strenght compared to 8 on the current nf4 (good for CPUs with cold bug) u should notice edi, new stuff took long time to land at our local market here juz give it a try then show us the result of some nice achievement  |
|
|
|
|
|
gengstapo
|
Oct 20 2005, 12:26 AM
|
|
|
QUOTE(ray99mond @ Oct 19 2005, 11:44 PM) anyone know which BIOS can allow DFI nf4 to get more than 456FSB selection ? 456FSB?? u mean HTT rite?? btw, have u achive the 455HTT? |
|
|
|
|
|
gengstapo
|
Oct 20 2005, 09:29 AM
|
|
|
QUOTE(ray99mond @ Oct 20 2005, 06:25 AM) i saw some people got more than 500MHz at CPUZ database there got 450MHz currently http://valid.x86-secret.com/show_oc?id=40921wahh.. high HTT u got there  is it faster than the 200 x9?? |
|
|
|
|
|
gengstapo
|
Oct 20 2005, 01:22 PM
|
|
|
QUOTE(chidori @ Oct 19 2005, 09:21 AM) wah....... thx for veryfying for me dude 2 x1gb, chipset infenion BE-5, timing 3-4-4-8 1T, vdimm 2.6. now running 210Mhz best can achieve is 2.5-3-3-7 1T at 200Mhz i tried 220 but cant pass memtest, how much voltage should i feed the ram? how abt the mobo chipset voltage? 2.6 arr? dun ya feel its kinda low?? raise the voltage at least 2.8V QUOTE(Westley @ Oct 19 2005, 10:01 AM) wondering when will Oscar release his 4X512 1T enabled bios. wat version of BIOS tat most ppl use? |
|
|
|
|
|
gengstapo
|
Oct 21 2005, 08:17 PM
|
|
|
//mebe outta topic.. since here the DFi tread, need help here. "im wonder why my board(as my siggy) kenot recognize my usb storage. its working just fine on my intel p4 rig(board P4SD). how to troubleshoot??" thanks -- just ignore --edi solve.. but only after i format my ext. storage at my p4 rig.. weird lol DFi board thanks for viewin' This post has been edited by gengstapo2: Oct 21 2005, 08:23 PM |
|
|
|
|
|
gengstapo
|
Nov 10 2005, 08:22 PM
|
|
|
QUOTE(jslut @ Nov 10 2005, 08:14 PM) erm, ok i kinda figured that out but under wat specific name?? btw, just now my com suddenly turned off by itself. the hsf is not hot, only a bit warm. and before it worked fine. only suddenly sudden turned off. is it power supply??? my rm600 psu  its Command PerClock(CPC)choose ENABLE to force 1T else will be 2T |
|
|
|
|
|
gengstapo
|
Nov 12 2005, 09:42 AM
|
|
|
QUOTE(kingmaker_20 @ Nov 12 2005, 02:08 AM) Latest bios will fix most ram issues.. ------------------------------------------------------------ QUOTE(moderno @ Nov 12 2005, 02:35 AM) mind to share which bios boost d43 performance on DFI? currently still using the 310 one yeahh.. im oso want to know which BIOS is it?? |
|
|
|
|
Quote
0.0182sec
0.32
7 queries
GZIP Disabled