I got mine 1 last 2 weeks ago but haven fully tested it because it has some problem with my kingston pc4300 (hynix ct-d43)
for those who using hynix BT or CT D43, do you find any problem with this board because I cannot raise the ram fsb more than 200?

anyway, just post some pic to attract you more... lol



This post has been edited by ray99mond: Mar 9 2005, 01:53 AM

are doing any sli on this mobo
do let know wat is the benchmark score

Try this:

Vdimm - 2.9V
DRAM Freq: 200 Dram Frequency 1:1
CPC: Enable CPC
CAS (TCL): 2.5
Trcd: 03
Tras: 07
Trp: 04
Trc: 07
Trfc: 14
Trrd: 05
Twr: 03
TwTr: 02
Trwt: 05
Tref: 3120
Twcl: 05
DRAM Bank Interleave Enabled

DQS Skew Control = INCREASE
DQS Skew Value = 0 (zero)
Dram Drive Strength= Auto
Dram Data Drive Stregth= Level 4
MAX ASYNCH LATENCY = 7ns
READ PREAMBLE= 5ns
IDLE CYLCE= 256 cycles
DYNAMIC Counter= Disabled
R/W Que Bypass = 16x
ByPass Max 7X
32 Byte Granularity = Disable 8 Bursts.

I am using SLI-DR and ULTRA. I have problem earlier too at default setting.

yah when i tested all ta DFI mobo, with kianwee, i can say, i taught our mobo got problems, but it seems proper bios tweaking is required,

i'm running at cpu at 2009mhz, ram at DDR400 2-2-2-6 , and it works flawlessly, of course, dude, since using such nice ram its best to get performance ram, to bottle neck this nice mobo,

me and kianwee is till waiting for our OCZ VX memory, best pair with this mobo, just like natural born killers~~

great but your coz has different kind of chipset rite?
samsung tccd ??

Hwoarang45 or kianwee,

where did you guys order your OCZ VX from and how much?

yeah, OCZ VX cannot go for high FSB, but no doubt is is the best performer due to low timing

as I know DFI nF4 ultra-D revA01, A02 can be modded to SLi
mine one is revA03, how about others?
not sure can mod to SLi or not ..

I heard from a couple of forumer that they managed to do that with the A03 board. I'm not sure how truw is that. BTW, getting the bridge is a problem.

My gf buy for us from the states and send back to msia. It is around RM17xx after conversion.

I have a SLi bridge from Gigabyte
What I need is to solve the memory probelm 1st becoz I start to mod it ..

did you solve your memory problem then?

If I solve then I already start to mod it lo..
coz currently still using gigabyte nF4 Ultra board, K8NXP-9

finger still cross, hopes ta price is right, and no tax kena~~~~

u mod ur ultra d to sli???

ray99mond,

I think I read somewhere in dfistreet or some other forum about DFI nF4's board that the memory settings at default are quite tight. Apart from the usual memory latency settings(cas, ras to cas, ras precharge, tras), the rest have to be loosened quite a bit too. I'm guessing it might be the reason why your D43's can't go higher than 200Mhz.

wat do u mean MOD to SLi? i dun really get it...

Friend. do a google 1st next time k? It seems early revisions of Nf4 Ultra chipsets were the same die as the NF4 SLi-D chipsets but SLi disabled. Have to just bridge a few pin outd

no point mod to sli mod coz u dont have da SLI bridge to make da 2nd vga become a true SLI mode...

That was what I was wondering. Is there anywhere you can purchase just the SLI bridge?

I think very soon there'll be a lot of after market SLI bridges floating around.