DFI nF3/4 series (LP and Infinity) users come in, Overclocking ability and troubleshooting
|
|
 Sep 2 2005, 11:06 PM
Return to original view | Post
#1
|
 
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.  
|
QUOTE(KilJim @ Sep 2 2005, 10:53 PM) ahh, okie so it'll be the DAGF for me if i'm not mistaken, rm3xx, sumwhere near d rm400 region. Ask dinster, i think he get his in lyp. any idea how much it costs in lyp?  btw guys, is nf3 ultra user allowed to join this thread?  |
|
|
|
|
|
Nov 5 2005, 12:19 AM
Return to original view | Post
#2
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(almostthere @ Nov 2 2005, 11:10 AM) I know but the thing is something came up and caused my budget for my that new rig to be reconsidered. Not interested in getting the Infinity's as they don't impress me much comparatively so was wondering what other options do I have anyway imo, this board ain't gud for venice 3k + tccd users, to use tccd on this board, atleast a chip w/ 10x multi is a muz, else tccd works like d43 onli...  OT: woot... looks like i'll have sumone who gona use d same mobo like me...  been waitin for this for months ledi... |
|
|
Nov 7 2005, 09:02 PM
Return to original view | Post
#3
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(almostthere @ Nov 5 2005, 11:44 AM) Owh ic, actually plan to use it with an Opty 144/146 and BH5's and see how it goes from there opty? hmm... shall use d 8/24 bios if happened use bought it ledi, since opty is on sandy core, which do well w/ d bios... |
|
|
Nov 12 2005, 09:42 PM
Return to original view | Post
#4
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(ikan_semilang @ Nov 12 2005, 11:50 AM) My friend want buy psu for DFI NF4 Lanparty UT SLi-D. Any recommend? Currently in list is Enermax EG565P-VE FMA 535-watt. Any suggestion? get it here, from david of dfi street...  http://www.dfi-street.com/forum/showthread.php?t=10854 |
|
|
Nov 13 2005, 12:38 AM
Return to original view | Post
#5
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
dun trust d software readins too much, esp on dis nF3 ultra-d, for more accuracy, use dmm to measure (voltage readins)...
|
|
|
Nov 13 2005, 01:47 AM
Return to original view | Post
#6
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
d 4-pin is for d 4.0v vdimm support, no idea for d other one thou...
 not a nF4 Ultra-D user... |
|
|
|
|
|
Nov 13 2005, 10:36 PM
Return to original view | Post
#7
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(gengstapo2 @ Nov 13 2005, 02:56 PM) ermm.. need help here IMO, sumthing wrong with d readins. 57 on chipset considered very high to me.im playing FarCry almost 4hrs & i just check my smartguardian & this is the result : cpu temp very low?? but why the PWMIC & Chipset goin' RED color?? normal arr??  have u tried mbm instead? use d mbm setup file from soundx98 of dfi street: HERE |
|
|
Nov 14 2005, 12:42 AM
Return to original view | Post
#8
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(newbieockids @ Nov 14 2005, 12:26 AM) tq very much ahpaul bro for the reply.. 3.2V is way too high for hynix chips, i would say 2.8-2.9V is sufficient enuf. try 2T w/o any divider if ur on low HTT, generally hynix can do 2.5/3-4-4-8 w/ d voltage mentioned above. 1) i've tested one stick right now running stable @ 220Mhz but Vdimm applied is 3.2V .. push it up to 225 then i cant boot to windows..2) Yeah im running the latest version same just like dat.. i think prob number 2 is ok i'll try to find the answer later.. but probs number 1.. perhaps u could lend some hand?..thanx.. some say dfi board aint like hynix chip, it mite apply here...  |
|
|
Nov 14 2005, 12:55 AM
Return to original view | Post
#9
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(newbieockids @ Nov 14 2005, 12:50 AM) yeah its way too high.. play more with d alpha settings, u'll find yaslf fall for 'em soon... still tweaking on 3-4-4-8 timings.. perhaps no more bucks going out for other ram chips..  |
|
|
Nov 14 2005, 02:21 AM
Return to original view | Post
#10
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(newbieockids @ Nov 14 2005, 01:27 AM) dunno why, d43 & d5 offer more or less ocbility i think, with d latter clocks lower than d 1st abit imo... @pcmoddingmy the ram is stated using hynix dt-d43 but @techpowerup! the ram is stated using hynix d5 i tot this ram using dt-d43 also at first.. im really happy if it is dt-d43 chips.. after saw the techpowerup review i take out the heat spreader n cried(hynix d5 inside).. i tried google out some info about this Hynix D5 chips.. but i didnt find anything special.. so far what can i do is set the cpu:ram ratio to 1:0.8 so at least i can see how much this venice can fly.. tired already tweaking the ram setting.. will continue it tmrw i think.. |
|
|
Nov 16 2005, 12:26 PM
Return to original view | Post
#11
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
how bout runnin it on stock settin?
|
|
|
Dec 3 2005, 10:14 PM
Return to original view | Post
#12
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
BH chips are meant to run 2-2-2-X...
|
|
|
Dec 4 2005, 10:05 PM
Return to original view | Post
#13
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
tested a pair of khx3200ak (should be ch-5), know wat guys?
 it booted even w/ cas 3 on nF4 ultra-d... |
|
|
|
|
|
Dec 10 2005, 09:53 AM
Return to original view | Post
#14
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(chinsc @ Dec 10 2005, 08:51 AM) oh i c~ so no matter how, FSB still running same with HTT? HTT = FSB in A64, frequency of ram depends on how u set d divider as wat Jim mentioned. im using DFI sli-d. im trying to o/c it to 300fsb but my system is not stable. stop prme after 10s. is it because the HTT is too high? or my venice need more vdimm? im try on 1.63V only. didnt try out more) thx wat kinda ram u are usin? could be ram problem oso. stepping of ya venice? I can safely say not all venice can do 2.7GHz. |
|
|
Dec 17 2005, 02:02 AM
Return to original view | Post
#15
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(sniper on the roof @ Dec 17 2005, 01:52 AM) Just wanna report in that my Ultra-D has died....well....more towards the IDE's have died..both of them! meaning dat d ultra-d is irreplacable... So the next plan is.... get another Ultra-D isn't that dfi covers 2year warranty for their mobo? |
|
|
Dec 20 2005, 11:04 PM
Return to original view | Post
#16
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(TaiFei @ Dec 20 2005, 02:07 AM) problem solved.. got enermax liberty if it's a ezy-to-configure board, it wun b called dfi. it's made to be tweaked, as simple as dat... this mobo really troublesome.. edited: typo... This post has been edited by ah_khoo: Dec 21 2005, 12:50 AM |
|
|
Dec 25 2005, 01:19 PM
Return to original view | Post
#17
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
manually assign d ip bro, i think dats d way to solve it.
btw, wats ya steppin bro? |
|
|
Dec 25 2005, 03:42 PM
Return to original view | Post
#18
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(gsan @ Dec 25 2005, 01:22 PM) got 1 problem else... what kinda fan u use? power not enuf? the fan speed... although i tune it to the max but it still running wih min speed or sometime even the fan stop if i connect to mobo. but if i use molex, the problem disappear.abt the stepping, tell u later |
|
|
Dec 25 2005, 04:10 PM
Return to original view | Post
#19
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(tAmp0i @ Dec 25 2005, 04:06 PM) Post the monster result here bro.... 0520FPMW...  |
|
|
Jan 3 2006, 12:03 AM
Return to original view | Post
#20
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(diablo69 @ Jan 2 2006, 11:23 PM) proc n ram setting... finally they release a new bios... DFI LanpartyUT nF3 Ultra-D (BIOS 12/19/2005) AMD Athlon 64 3000+ Venice 2x Kingston Hyper X 3200ULK2 512MB HIS Radeon X800Pro 256mb AGP@x800xt Seagate Barracuda 80gb - SATA 1 Seagate Barracuda 80gb - SATA 2 NEC Black DVD+/-RW ND-3540A - IDE 1/0 Acbel 450W Pure Power w/ PFC one of the problem is the ram... only can get it to run dual channel when both stick is placed in the same channel(currently in dimm 3 and 4).... does this mean that there is problem with the mobo... wat does is i manage to pass OCCT test but got error for SuperPI 32M itteration... should i lower the fsb or anything else... and if there any problem noticed in the pic do tell... thanx... tccd works best in orange slots for this board, find d max for either CPU or ram AT ONE TIME, else u'll just end up wastin alot of time to figure out d factor lead to instability... Edited: use d ports near to d cpu, they are locked. This post has been edited by ah_khoo: Jan 3 2006, 12:04 AM |
|
Topic ClosedOptions
|
| Change to: |  0.0498sec
 0.63
 7 queries
 GZIP Disabled
Time is now: 1st December 2025 - 12:10 PM |
Quote