1. Yea.. you can use the internet straightly after the technician setup your connection and activate your account.

2. Definitely they will do that. But they will use default settings which is default password something like 'abcd123456789', default SSID, usually ur username@streamyx or streamyx mobility and default security setting which is WEP that is really hackable. It is recomended for u to change the SSID, your wifi security setting from WEP to WPA and your wifi password and ALSO YOUR STREAMYX PASSWORD straightly after the technician leaving your house...

3. To change your Streamyx password, you can do it here : https://tmbill.tm.net.my

This post has been edited by AjkR06: Jul 4 2011, 10:49 AM

im using this with 4mb package...
video streaming is ok...can stream 10**p video and no need to wait...
download is ok,but unstable...maximum speed 500kb/s...sometime 20kb/s+
surfing is ok,no need to wait...photo/flash load fast...

PS...my 4mb package for 3pc in use...

The 4mbps not bad,download from 400-500kb/s like that,jumping here and there haha.

Anyways,yeah 1080p videos are fast xD

They just installed it!!!!!


The technician install the streamyx


The technician setting up and configure the speed and router


I stated to him that there is 9 people in the house and he said, "What!? 1Mbps is not enough!".
So I asked him, as the technician, what he would do?
Hence, he said he'll configure it up above 1Mbps lah...hehehe

Here's the screenshot of the speed



Quite good also.

Question:

1. If I don't use my wifi, can i just switch off the modem and unplug it? Anything bad will happen if i do that?

This post has been edited by tai_digidestany: Jul 4 2011, 11:35 AM

Nothing bad will happen... Just switch off when you don't want to use the internet. In fact, you will be saving some electricity by doing that

Oh, so i just switch it on when i want to use it, is it?

Yes...
Because everything is already setup on your router..
BTW, have you change your wifi password, ssid names, and most important is, your Streamyx ppope password?

Wifi Password: Done
SSID Name: Done
Streamyx ppope password: Dunno. Is it the login id name when you access your router?

You can look for your default password at the sticker on the D-Link router...

I know the default one is 'tmadmin'.
but then on how to change it.
later on takut ada orang change it maa...

IF they don't have your router's wifi password,then they cannot change your default password to the router.
That's what from my knowledge la..unless they put a lan cable into your modem

'tmadmin' is your ROUTER password.
Not your account password.



Usually, your account password is written just beside your Streamyx ID or username.





This post has been edited by AjkR06: Jul 4 2011, 06:03 PM

Got it!
Thank you.
I manage to change the password.

---

Added on July 5, 2011, 11:26 am

Hehehehehe. Very fast one. Okay la around 100KBps rather than nothing.

---

Added on July 13, 2011, 10:15 am1MBps that i langgan but see what i got?






This post has been edited by tai_digidestany: Jul 13 2011, 10:15 AM

i need to ask something. for BB deal 2mb is rm130 right? is it include the tm fix line monthly charge (around rm22?)
my total nett price need to pay is RM130 or RM152?
thanks !

i have upgraded my 1mbps to 4mbps but my speed is still on 1mbps..i called 100 then they said that they had released the speed according to 4mbps speed...the technician said they had configured my settings..untill now almost 2 weeks nothing happen..they keep blaming each other..
here is the status



Uploaded with ImageShack.us

---

Added on July 18, 2011, 9:02 pmi think i want to configured it by myself is it possible?because in TM system i had upgraded to 4mbps that means i have to pay 140 in next following bill and they had released my speed

This post has been edited by shinchan5347: Jul 18 2011, 09:02 PM

FYI RM130 already inclusive of monthly rental.

Have you try to restart your router?
And check at your router setting the speed that they put up?
Usually 4Mbps they put as 5024kbps.

I have turn off my router for several times but nothing happen...the downstream rate is 2k something...Can I configured it by myself?

---

Added on July 19, 2011, 10:41 amBecause technician and tm keeps saying that they had done their work but till now it almost 2weeks nothing haPpen

---

Added on July 19, 2011, 11:08 amhere is my connection details


Uploaded with ImageShack.us

This post has been edited by shinchan5347: Jul 19 2011, 11:09 AM

Do send all the attachments that you post here and lodge your report to help@tm.net.my
In the previous posts, some forumers also have this problem but been solved when they did this.

sigh i wanted to upgrade to 4mb since the 1.5->1mb recap

was told area got no 4mb ports available....