Yes, to compare with EQ1 graph.
There is something missing in the graph. It should roll-off later.
Kiam, did you follow the steps of the sub setting prior to the EQ1 calibration. For EQ1 s/w, there is an option for Auto EQ. If your avr has Auto EQ, then you need to select 'On'.
Oh yes, I thought that you do not have a tall tripod to put it up at listening level. Or you 'modified' your mini tripod to get it at ear height.
Did you follow these prior to the calibration:
1. Ensure the Gain on your subwoofer(s) plate amp is set to the middle of its range as a starting point.
2. Set the Phase control of your subwoofer(s) to 0 (the AS-EQ1 will adjust each subwoofer to ensure proper phase alignment).
3. Bypass the subwoofer’s built-in low pass filter (often referred to as a ‘crossover’) with the defeat switch or by connecting to an unfiltered input (typically labeled “Direct”, “LFE”, or “THX”). If it is not possible to
bypass the low pass filter, set the filter control to its highest frequency setting.
boss, ya...dont have the tall tripod. Will only able to rerun things coming newyear weekend. Just did a quick setup by stacking a few things to bring the mini tripod to ear height.
now in pg. waiting for ront88 boss to bring me go eat prawn mee too