wanna ask, can i use my own wifi router and modem instead of using their tm modem to setup the 4m line?

yes you can. If you can use it with 1Mbps or lower than you can use it for 4Mbps no problem. For unifi, thats a different story.

^

thx for the info.

is their wifi modem good? when the technician come to my house to setup the connection, can i ask them to setup using my own router modem instead of the tm one?

yes, why not..haha..if they want to use other modem to test, den u change it back after they go away..my technician even din bother the speedtest, just see the snr and directly activate my account..

Their modem/router is just ok for home users i.e. it will do pretty much what home users need and some more.

You don't need to setup anything if its just a simple 1Mbps to 4Mbps upgrade since the modem will do the job by itself and detect the new sync speed rate. As for the router, you can use your own if you want to.

What to do with the free modem/router? Keep it in case yours got fried by lightning

do u know what is the "modem username n modem password" 4 riger modem? r they standard 4 all riger modem or TM assigned different username p/w 4 every modem? when contractor come 2 setup the line 4 me, i 4got 2 ask 4 username n password? 2 excited with testing 4mbps i guess.

The riger modem default username and password is

username : tmuser
password : tmuser

use
username: tmadmin
password: tmadmin

the tmuser username enables you to log in but unable access to the modem settings.

internet today is quite unstable

Hello everyone,

An off-topic question:

How many KB/sec one can achieve with 2MB package?

Couldn't find any 2MB topic, so so sorry

TQ

Maximum speed of 2Mbps package capped at 3Mbps
Even thou u see many spikes in the graph, the average is about 1.99Mbps

This post has been edited by kaiserreich: May 9 2010, 12:57 PM

200 ~ 300 I guess

2M~250kb/s

guys,can my line support 4mbps?currently on 1mbps

Statistics -- ADSL

Mode: G.DMT
Type: Fast
Line Coding: Trellis On
Status: No Defect
Link Power State: L0

Downstream Upstream
SNR Margin (dB): 19.2 10.0
Attenuation (dB): 18.0 5.0
Output Power (dBm): 7.4 11.5
Attainable Rate (Kbps): 4160 732
Rate (Kbps): 1024 512
\

asked agent of blockbuster deals and they said my line can be upgraded to 4mbps.

Probably can't because if the rate (downstream) is increased to 4096 (from 1024), then your line's SNR margin gonna drop significantly and cause frequent disconnection. You could opt for a indoor rewiring and see the results. If that doesn't work then maybe can rewire the outdoor wiring (from the poll to your house) and see how it goes.

However before doing any of that please CONFIRM FIRST that your line CAN SUPPORT 4Mbps. No point of doing all that rewiring if 4Mbps is not even available in the first place.

PS: Reason for rewiring is that it will improve your line's status.

Great now I dont get 218.111 ip any more. I think they have changed it. If you're on 218.x.x.x , try disconnecting and reconnecting !

giv 218.111 to unifi?

erm not happening to me, still getting 218 range =D

Does this good for 4mbps connection.

Statistics -- ADSL

Mode: G.DMT
Type: Interleave
Line Coding: Trellis On
Status: No Defect
Link Power State: L0

Downstream Upstream
SNR Margin (dB): 33.0 26.0
Attenuation (dB): 23.0 5.0
Output Power (dBm): 11.3 12.5
Attainable Rate (Kbps): 11296 1248
Rate (Kbps): 1536 512
K (number of bytes in DMT frame): 49 17
R (number of check bytes in RS code word): 16 16
S (RS code word size in DMT frame): 2 8
D (interleaver depth): 8 2
Delay (msec): 4 4

Super Frames: 18289 18287
Super Frame Errors: 0 0
RS Words: 621846 155439
RS Correctable Errors: 0 0
RS Uncorrectable Errors: 0 N/A

HEC Errors: 0 0
OCD Errors: 0 0
LCD Errors: 0 0
Total Cells: 1126445 0
Data Cells: 787 0
Bit Errors: 0 0

Total ES: 0 0
Total SES: 0 0
Total UAS: 20 0

so easy wanna know either your place support or not 4 mb
go to TM give them your phone number that all
thank you

y nt ADSL 2+