U can ask zen friend about lcp. He wanna sell it... Refer mudah link zen give... Me use lcp redline...

incomplete meh?
at least i can find more info about the LCD Display (Odometer/Trimeter)

hmm... top up another few hundreds can get hotbits full set exhaust already...

In other forum,
they suggest 10W-30 engine oil for CPS Engine ...

For cps engine, it requirement for 10w-30 or 10w-40. If you use mineral, the hydraulic tappet adjustment will jam. If use fully, the engine will have loud tappet sound and for few years, you will see engine oil leaking at oil seal.

then the suitable engine oil for CPS Engine would be 10W-30 or 10W-40 Semi Syn??

i was tempting to try 5W-30 or 10W-30 Fully Syn engine oil for my next service...

some CPS users claimed that using 10W-30 engine oil will make the engine sound more rough...

mean 10w-40 or 10w-30 still can... You try 10-w40. You can feel the different.

And ppl say using full syn can go 10,000KM before next service..looks like engine can't even last 100,000KM~

i cancel buying Castrol magnatec 10w40 when i see Mobil S 10w40 wif 'Very High Performance' tagged hehe
they sell it Rm99 at tesco ..guys isit ok wif Mobil S?
btw they sell castrol magnetec rm105..

pedang laut: go for it but i agree with ahpaul, can get the hotbits full set with some topup. i prefer to get the header and leave the rest untouched.

singchai: i used 5w-30 bardhal fully synthetic and it does sounds rougher than the previous 5w-40 shell fully syn i used. currently using semi syn 10w-40 from shell green bottle. engine more quieter. however, lower viscocity number give u better mileage due to lesser restriction (maybe less protection?)

jvipers: i wouldn't dare to stretch that long. max also 7500kms at most and need to change filter also.. hehe..

But if you get hotbit, you cannot leave the rest untouch since the piping size is different.

I'm using Mobil 1 10w50 right now and its quieter than my previous Helix Ultra 5w40, but can feel slightly heavier when accelerating.

actually i dont know the hotbits price how much rr?i think 1.5k for full system rite
that almost 2x my budget oledi
one more 1.75" piping just to small for future mod
i think i will using same piping size 2" wif stock

---

Added on December 2, 2009, 10:32 ami think its due to 50 figure give the heavy feel rite..

This post has been edited by pedanglaut: Dec 2 2009, 10:32 AM

Yeah, the number at the back is important to us, the number in front of the 'w' is for winter.

any LCP brand will do. The best is to keep the same size like Mythelogy. Else underdrive (smaller) by 1/2cm & 1 cm still bareable.

how about 10w40 motul? anyone? is it better than other brand?

10-W40???

definetely i will try xW-30 Engine Oil for my next service...

want to know how 'light' is the engine


agreed with jctasoga,
i guess the best time for fully syn engine oil change is 7000km right?

Castrol Magnetec and Mobil S engine oil you saw both also fully syn engine oil?
that's cheap...

last time saw at Eneos 1U, full set Hotbits exhaust is RM13xx,
one of our forumer changed full set Hotbits exhaust @ HQ only RM11xx something if i'm not mistaken...

Hear that Everco brand Extractor also not bad,
RM3xx only for 2" Extractor.

I guess I'm the one who using Motul 6100 SYNERGIE+ 10W-40 Semi Syn Engine oil here..
no comment on it since i haven't try other brand of engine oil yet
but Motul engine oil indeed is an expensive engine oil

i'm still newbie if talking abt exhaust setups. but i thought using the bullet should be able to address the 1.5" to 2" piping issue. from smaller to bigger diameter shouldn't be any big worries at all? dunno la.. haha..

dear waja cps user, i would like to ask about the gated gear shifters on your cps
i'm planning to change my old waja gear shifters to those like waja cps type, but i heard there's some complaint about the shifters is a bit stiff, does it get loose over time? thanks in advance

loose over time? mine is about 1 and half years old with mileage reaching 60k. the stick still feel stiff...

is it really a problem? i mean is it annoying?
i would love to change mine as my current one are quite bad in shape already although its still functioning well
plus i love the 'luxury' look of the gated shifters

anyone always bring own item during service ?? or change certain item earlier than the schedule ?/

any effect n what bout your warranty ?

i go to sec13 proton, n they dun allow me change. Even i wan buy coolant from them also cannot. must wait 20k

anyway , i juz did my 15k service @ subang proton. juz chg motul 10w40, redline gearoil 2 1/2 bottle, denso iridium n coolant

It seem like few proton sc also said the aircond airvent sound cannot solve. issit true ?

I'm back from holiday..16 hours travel (13 hours drive + 3hours stop) from tanah merah - KB - Tumpat - KB - Gua Musang - KL. tiresome drive from machang to kuala krai...jam all the way

manage to test my car during hill climbing along the way back to kl...max rev at 5k rpm before the gear self-shifting My wife said my car sounds like a turbo car

I don't think it's a problem. In early stage, the stick are a bit difficult to move, now quite easy to move only moving the stick from D to 3rd and below abit stiff because I seldom use it.

This post has been edited by eastwest: Dec 2 2009, 03:08 PM